Praktica ATCAT2SS Handleiding

Praktica Niet gecategoriseerd ATCAT2SS

Lees hieronder de 📖 handleiding in het Nederlandse voor Praktica ATCAT2SS (1 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 36 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/1

Digiscoping DSLR Camera Adapter

Attach your SLR camera to your spotting scope in a matter of seconds and take photographs at long

range. All you need is an SLR camera, a spotting scope with an an eyepiece diameter 28-42mm, the

PRAKTICA Digi-scoping Camera Adapter and a T2 Mount.

Set up is easy, just follow these simple steps!

1. Screw the DSLR camera adapter onto the T2 Mount.

2. Place the camera adapter over the spotting scope eyepiece and screw into the thread.

3. Remove your DSLR lens from your camera body and then attach your camera to the T2 Mount.

1. 2. 3.

When using an adapter the range of exposure modes and metering is limited. On most cameras you can use manual or

aperture-priority modes, and centre-weighted metering.

It’s important to note that you cannot adjust the aperture when using a spotting scope. Use the automatic ISO setting on

your camera to adjust the exposure without relying simply on the shutter speed. Limit the ISO to 1600, and set the minimum

shutter speed to 1/500 sec to get sharp results.

You will have to use manual focus when digiscoping, and this can be difficult to judge due to the limited depth of field and

the small maximum apertures of most spotting scopes. Roughly focus the scope on your subject then fine tune your

focusing slowly until it is spot-on.

When finished press the camera lens release button on your DSLR to dismantle the T2 Mount.

DSLR Camera Settings

Digiscoping DSLR Camera Adapter

Use Manual or Aperture

Priority modes

Limit ISO to 1600

Set to centre

weighted metering Lens release button

dismantles the mount

Shutter speed at

minimum of 1/500 sec

Product specificaties

Merk:	Praktica
Categorie:	Niet gecategoriseerd
Model:	ATCAT2SS
Kleur van het product:	Zwart
Gewicht:	60 g
Breedte:	44 mm
Diepte:	42 mm
Hoogte:	94 mm
Materiaal:	Metaal
Aantal producten inbegrepen:	1 stuk(s)