Powertec BD4600 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Powertec BD4600 (16 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 43 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16
Owner’s Manual
Model No. BD4600
14-0328
You will need this manual for safety instructions, operating procedures, and warranty.
Put it and the original sales invoice in a safe, dry place for future reference.
Visit us on the web at www.southerntechllc.com
4" x 6" Belt/Disc SANDER
Horsepower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/2
Voltage 120 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Amp .......................................4.3
Hertz 60 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Phase Single . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RPM 3600 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Belt Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4" x 36"
Belt speed 1900 SFM . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Belt Grit A80 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table Dimensions 6-1/2" x 8-3/4" . . . . . . . . . . . . . . . . . . . .
Table Tilts 0 to 90° . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Disc Diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6"
Disc Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3600 RPM
Disc Grit . . . . . . . . . . . . . . . . . . . . . . . . . . . .A80 PSA Type
(Pressure Sensitive Adhesive)
Dust Port Diameter 2-1/4" . . . . . . . . . . . . . . . . . . . . . . . . .
Base Dimensions 10" x 17" . . . . . . . . . . . . . . . . . . . . . . . . .
Net Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38 lb
TABLE OF CONTENTS PRODUCT SPECIFICATIONS
SAFETY RULES 1
Work Preparation
Work Area Preparation
Tool Maintenance
Tool Preparation
ASSEMBLY 2
Unpackaging
Tool Needed
Mount the Work Table
Mount the Work Support
Mounting the Sander to Work Surface
Sanding Belt Tracking Adjustment
Sanding Belt Bet Positions
Dust Port Options
Square the Table
Square the Work Support
Replace the Sanding Disc
Replace the Sanding Belt
Power Source
Grounding Instructions
Extension Cords
Motor
Electrical Connections
OPERATION5 6
ON/OFF Switch
Surface Sanding on Sanding Belt
Sanding Inside Curves
End Sanding and Outside Curve Sanding with
the Disc
Belt Sanding- Horizontal and Vertical Sanding
Miter Gauge -Disc Sanding
MAINTENANCE 8
General Maintenance
Lubrication
Adjust the Drive Belt
TROUBLESHOOTING 9
PARTS ILLUSTRATION & 10
L
WARRANTY 12
SECTION PAGE
SAFETY RULES 1
For your own safety, read and understand all warnings
and operating instructions before using any tool or
equipment.
Some dust created by operation of power tool contains
chemicals known to the State of California to cause
cancer, birth defects or other reproductive harm.
To reduce your exposure to these chemicals, work in a
well ventilated area and work with approved safety
equipment. Always wear OSHA/NIOSH approved,
properly fitting face mask or respirator when using such
tools.
Failure to follow these rules may result in serious personal
injury. Remember that being careless for even a fraction
of a second can result in severe personal injury.
WORK PREPARATION
• Wearproperapparel.Donotwearlooseclothing,
gloves, neckties, rings, bracelets or other jewelry which
may get caught in moving parts of the tool.
• Nonslipprotectivefootwearisrecommended.Wear
protective hair covering to contain long hair.
• Weareyeandhearingprotection.Alwaysusesafety
glasses. Eye protection equipment should comply with
ANSI Z87.1 standards. Hearing equipment should
comply with ANSI S3.19 standards.
• Wearfacemaskordustmaskifoperationisdusty.
• Bealertandthinkclearly.Neveroperatepowertools
when tired, intoxicated or when taking medications that
cause drowsiness.
WORK AREA PREPARATION
• Keepworkareaclean.Clutteredworkareasand
benches invite accidents.
• Workareashouldbeproperlylighted.
• Donotusethemachineinadangerousenvironment.
The use of power tools in damp or wet locations or in
rain can cause shock or electrocution.
• Three-prongplugshouldbepluggeddirectlyinto
properly grounded, three-prong receptacle.
• Usetheproperextensioncord.Makesureyour
extension cord is in good condition. It should have
grounding prong and should be of the correct gauge.
• Keepchildrenandvisitorsaway.Yourshopisa
potentially dangerous environment. Children and visitors
can be injured.
• Makeyourworkshopchildproofwithpadlocks,master
switches or remove switch keys to prevent any
unintentional use of power tools.
• Itshouldhaveagroundingprongandshouldbeofthe
correct gauge.
TOOL MAINTENANCE
• Turnthemachine"OFF",anddisconnectthemachine
from the power source prior to inspection.
• Maintainalltoolsandmachinesinpeakcondition.Keep
tools sharp and clean for best and safest performance.
• Followinstructionsforlubricatingandchanging
accessories.
• Checkfordamagedparts.Checkforalignmentof
moving parts, binding, breakage, mounting and any
other condition that may affect tool's operation.
• Poorlymaintainedtoolsandmachinescanfurther
damage the tool or machine and/or cause injury.
• Aguardoranyotherpartthatisdamagedshouldbe
repaired or replaced. Do not perform makeshift repairs.
TOOL OPERATION
• Avoidaccidentalstart-up.Makesurethatthetoolisin
the “OFF” position before plugging in.
• Usetherighttoolforyourjob.Donotforceyourtool or
attachment to do a job for which it was not designed.
• Disconnecttoolwhenchangingparts.
• Don'tforcetheworkpieceonthemachine.Damageto
the machine and/or injury may result.
• Neverleavetoolrunningunattended.Turnthepoweroff
and do not leave tool until it comes to a complete stop.
• Donotoverreach.Lossofbalancecanmakeyoufall
into a working machine, causing injury.
• Neverstandontool.Injurycouldoccurifthetooltips,or
if you accidentally contact the cutting tool.
• Knowyourtool.Learnthetool’soperation,application
and specific limitations before using it.
• Useaproperextensioncordofthecorrectgauge.Your
extension cord should have a grounding prong, and
should be in good condition.
• Handleworkpiececorrectly.Keephandsawayfrom
moving parts.
• Turntooloffifitjams.
• Alwaysfeedworkpieceagainstthedirectionofthe
sanding rotation. To maintain control, properly support
long or wide work-pieces.
CAUTION
Think safety! Safety is a combination of operator common
sense and alertness at all times when tool is being used.
Do not attempt to operate tool until it is completely
assembled according to the instructions.
WARNING
WARNING
WARNING
WARNING
1
SAFETY RULES


Product specificaties

Merk: Powertec
Categorie: Niet gecategoriseerd
Model: BD4600

Heb je hulp nodig?

Als je hulp nodig hebt met Powertec BD4600 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Powertec

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd