POWERNAIL 54P Handleiding
POWERNAIL
Nietmachine
54P
Lees hieronder de š handleiding in het Nederlandse voor POWERNAIL 54P (12 pagina's) in de categorie Nietmachine. Deze handleiding was nuttig voor 4 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/12
Powernail 54P Pneumatic PowerTackerā¢
POWERNAIL
Ā®
CO.
REV 09.14.17
WARNING
OPERATION AND MAINTENANCE MANUAL
MANUAL DE OPERACION Y DE MANTENIMIENTO
MANUEL DāINSTRUCTIONS ET DāENTRETIEN
Read this manual before you use this pneumatic PowerstaplerĀ®. Follow all safety
warnings and instructions. If you are uncertain about the operation of the nailer, call us
directly at 1-800-323-1653 for assistance or contact the closest Powernail Dealer for
help. Please retain this information for future reference.
2
The Powernail trigger-pull Carpet Tacker is designed to bring Powernail quality and ļ¬ ooring
expertise to an electric stapler. The Powernail carpet tacker is designed for use with 9/16ā
staples.
The Powernail PowerTackerā¢ is designed to be used for installation of carpet and carpet
padding.
INTRODUCTION
INDEX
LIMITED WARRANTY
POWERNAILĀ® Company, Inc. warrants to its customer, and to the ļ¬ rst end-use purchaser of
POWERNAIL trigger-pull PowerTackerā¢ purchased from an authorized POWERNAIL distributor,
that each serialized manufactured trigger-pull PowerTackerā¢ by POWERNAILĀ®, for a period of 12
months from the date of purchase, and with respect to the PowerTackerā¢ power cord for a period
of 100 days; shall be free of defects in materials and workmanship and will meet POWERNAILāS
speciļ¬ cations in eļ¬ ect at the time of product shipment. POWERNAIL will repair or replace, at its
option, any Powernail PowerTackerā¢ that s warranty. Claims does not conform to thi must be made
no later than ļ¬ fteen (15) days after the end of the warranty period. POWERNAIL will perform all
repair or replacements itself or through its authorized contractors. POWERNAIL is not responsible
for shipping, labor or other direct or indirect costs. Damage caused by abuse, misuse, unusual or
excessive wear is excluded. Repair or modiļ¬ cation of the Products by unauthorized parties will void
this warranty. The customer is responsible for returning Products to POWERNAIL for veriļ¬ cation
of nonconformance. Warranties for Products not manufactured by POWERNAIL are limited to
warranties provided to POWERNAIL by the manufacturer of such product that are assignable to
customer.
THESE WARRANTIES AND REMEDIES ARE EXCLUSIVE OF ALL OTHERS, EXPRESS
OR IMPLIED. THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PURPOSE
ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL POWERNAILāS LIABILITY
FOR A WARRANTY CLAIM EXCEED THE PRICE PAID TO POWERNAIL FOR THE
NONCONFORMING PRODUCT, REGARDLESS OF THE FORM OR BASIS OF THE CLAIM
OR CAUSE OF ACTION.
Index..................................... 2
Warranty............................... 2
Safety............................. 3
Operation............................. 4-5
Loading Staples........................ 6
Clearing a jam...................... 7
Safety Labels......................... 7
Maintenance......................... 7
Technical Speciļ¬ cations........ 8
Troubleshooting Chart.......... 9
Schematic / Parts List.......... 10-11
Phone Support..................... 12
Web Site.............................. 12
Powernail Company Info..... 12
SAFETY INSTRUCTIONS
3
When operating this stapler, the operator and others in the work area should
ALWAYS wear approved SAFETY GLASSES, with front and side eye protection
(i.e. OSHA required iZ87i safety glasses). Eye protection will help guard against
ļ¬ ying staples and debris, which could cause severe eye injury.
EAR PROTECTION should be used to prevent hearing damage when there are high
noise levels in the work area. ALWAYS use ear plugs with a noise reduction rated
at 29 db or higher at a construction site.
Never place any part of the body in the discharge path of the carpet tacker when air
is connected to the stapler. Never point the tool at yourself or others, even if the tool
is not loaded. Never leave the carpet tacker unattended while it is plugged in to an
air source. For safety, keep tools locked up and out of reach of children.
To prevent accidental misļ¬ re, always DISCONNECT THE AIR SUPPLY before
making any adjustments, repairing, clearing jams or when the stapler is not in use.
Do not use on scaļ¬ olding or ladders and disconnect stapler from air supply when
transporting
between installation areas.
Never attach the female end of a quick disconnect to the stapler. This will trap
air inside the stapler and permit it to be discharged. Only the unrestricted male
connection should be attached to the stapler.
Stapler requires an air source that can continuously deliver 70 to 120 psi at 3-1/2
cubic feet of air per minute for operation.
Normal air pressure should not exceed 120 psi or damage to the stapler and seals
may occur. Excess air pressure can cause the stapler to explode.
To prevent ļ¬ re or explosion, use only regulated compressed airādo not use
bottled gases of any kind (no oxygen or combustible gasses) to power this stapler.
Use only Powernail replacement parts in the repair or maintenance of this carpet
tacker. Parts or repair services are available from the manufacturer or from agents
authorized by the manufacturer. Repairs should be carried out only by trained service
personel in the ļ¬ eld of fastener driving tools who will observe proper safety controls
while performing maintenance. Service personel should be qualiļ¬ ed to assess the
safe working condition of fastener driving tools.
When not in use, the tool should be cleaned, fully assembled and then stored in a
dry location. This will extend the life of the tool and reduce any oxidation. Keep work
area clean. Cluttered work areas invite injuries. Dress properly. Be sure not to wear
clothing or jewelry that may get caught in moving parts. Rubber gloves and non-skid
footwear are recommended when working outdoors. Wear protective hair covering
to contain long hair.
Keep work area well lit. Keep children away and visitors away from work area. Do
not let visitors contact tool. Do not operate tool when you are tired. Always stay
alert and watch what you are doing.
Product specificaties
| Merk: | POWERNAIL |
| Categorie: | Nietmachine |
| Model: | 54P |
Heb je hulp nodig?
Als je hulp nodig hebt met POWERNAIL 54P stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Nietmachine POWERNAIL
24 Mei 2023
Handleiding Nietmachine
- Nietmachine Bosch
- Nietmachine DeWalt
- Nietmachine Whirlpool
- Nietmachine Einhell
- Nietmachine Fellowes
- Nietmachine Gude
- Nietmachine Hikoki
- Nietmachine Hitachi
- Nietmachine Holzmann
- Nietmachine Iluv
- Nietmachine Kensington
- Nietmachine Leitz
- Nietmachine Makita
- Nietmachine Meister
- Nietmachine Metabo
- Nietmachine Milwaukee
- Nietmachine Parkside
- Nietmachine Powerfix
- Nietmachine Powerplus
- Nietmachine President
- Nietmachine Proline
- Nietmachine Ryobi
- Nietmachine Sencor
- Nietmachine Silverline
- Nietmachine Targus
- Nietmachine Topcraft
- Nietmachine Vonroc
- Nietmachine Workzone
- Nietmachine Klein Tools
- Nietmachine Rapid
- Nietmachine Genesis
- Nietmachine Fieldmann
- Nietmachine Porter-Cable
- Nietmachine Sun Joe
- Nietmachine Rapoo
- Nietmachine Dedra
- Nietmachine MSW
- Nietmachine Craftsman
- Nietmachine Surtek
- Nietmachine Rexel
- Nietmachine Swingline
- Nietmachine Total
- Nietmachine Aqua Joe
- Nietmachine Abac
- Nietmachine CTA Digital
- Nietmachine Meister Craft
- Nietmachine Werckmann
- Nietmachine Neo
- Nietmachine Syscom
- Nietmachine Mannesmann
- Nietmachine Smart365
Nieuwste handleidingen voor Nietmachine
16 December 2024
6 December 2024
3 December 2024
3 December 2024
15 Oktober 2024
27 Augustus 2024
15 Juli 2024
15 Juli 2024
15 Juli 2024
15 Juli 2024