Power Dynamics PDVC50 Handleiding

Power Dynamics Niet gecategoriseerd PDVC50

Lees hieronder de 📖 handleiding in het Nederlandse voor Power Dynamics PDVC50 (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 159 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/8
PD VOL50 100V Volume Control 50W
Ref. nr.: 952.570
INSTRUCTION MANUAL
MANUEL D'INSTRUCTIONS
V1.2
ENGLISH
Congratulations to the purchase of this Power Dynamics product. Please read this manual thoroughly prior to using the unit in
order to benet fully from all features.
Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to
avoid re and/or electrical shock. Repairs must only be carried out by a qualied technician in order to avoid electrical shock.
Keep the manual for future reference.
- Prior to using the unit, please ask advice from a
specialist. When the unit is switched on for the rst time,
some smell may occur. This is normal and will disappear
after a while.
- The unit contains voltage carrying parts. Therefore do
NOT open the housing.
- Do not place metal objects or pour liquids into the unit
This may cause electrical shock and malfunction.
- Do not place the unit near heat sources such as
radiators, etc. Do not place the unit on a vibrating
surface. Do not cover the ventilation holes.
- The unit is not suitable for continuous use.
- Be careful with the mains lead and do not damage it. A
faulty or damaged mains lead can cause electrical shock
and malfunction.
- When unplugging the unit from a mains outlet, always
pull the plug, never the lead.
- Do not plug or unplug the unit with wet hands.
- If the plug and/or the mains lead are damaged, they
need to be replaced by a qualied technician.
- If the unit is damaged to such an extent that internal
parts are visible, do NOT plug the unit into a mains outlet
and DO NOT switch the unit on. Contact your dealer. Do
NOT connect the unit to a rheostat or dimmer.
- To avoid re and shock hazard, do not expose the unit to
rain and moisture.
- All repairs should be carried out by a qualied technician
only.
- Connect the unit to an earthed mains outlet (220-
240Vac/50Hz) protected by a 10-16A fuse.
- During a thunderstorm or if the unit will not be used for a
longer period of time, unplug it from the mains. The rule
is: Unplug it from the mains when not in use.
- If the unit has not been used for a longer period of time,
condensation may occur. Let the unit reach room
temperature before you switch it on. Never use the unit in
humid rooms or outdoors.
- To prevent accidents in companies, you must follow the
applicable guide lines and follow the instructions.
- Do not repeatedly switch the xture on and o. This
shortens the life time.
- Keep the unit out of the reach of children. Do not leave
the unit unattended.
- Do not use cleaning sprays to clean switches. The
residues of these sprays cause deposits of dust and
grease. In case of malfunction, always seek advice from
a specialist.
- Do not force the controls.
- This unit is with speaker inside which can cause
magnetic eld. Keep this unit at least 60cm away from
computer or TV.
- This unit is with built-in lead-acid rechargeable battery.
Please recharge the battery every 3 months if you are
not going to use the unit for a long period of time. Or the
battery may be damaged.
- If the battery is damaged please replace with same
specications battery. And dispose the damaged battery
environment friendly.
- If the unit has fallen, always have it checked by a
qualied technician before you switch the unit on again.
- Do not use chemicals to clean the unit. They damage the
varnish. Only clean the unit with a dry cloth.
- Keep away from electronic equipment that may cause
interference.
- Only use original spares for repairs, otherwise serious
damage and/or dangerous radiation may occur.
- Switch the unit o prior to unplugging it from the mains
and/or other equipment. Unplug all leads and cables
prior to moving the unit.
- Make sure that the mains lead cannot be damaged when
people walk on it. Check the mains lead before every use
for damages and faults!
- The mains voltage is 220-240Vac/50Hz. Check if power
outlet match. If you travel, make sure that the mains
voltage of the country is suitable for this unit.
- Keep the original packing material so that you can
transport the unit in safe conditions.
This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sucient
magnitude to cause a shock hazard.
This mark attracts the attention of the user to important instructions that are contained in the manual and that he should
read and adhere to.
The unit has been certied CE. It is prohibited to make any changes to the unit. They would invalidate the CE certicate and
their guarantee!
NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/ °F 41 and
35 95°C/ °F .
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your
dealer about the way to proceed. The specications are typical. The actual values can slightly change from one unit to the other.
Specications can be changed without prior notice.
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would also invalid
your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings
contained in this manual. Power Dynamics cannot be held responsible for personal injuries caused by a disrespect of the safety
recommendations and warnings. This is also applicable to all damages in whatever form.
MOUNTING THE VOLUME CONTROL
The volume control is designed to be mounted in a standard
electrical wall box. Select a location that is within reach of the
speaker wires and easy to reach for using the volume control.
Warning: You must mount the volume control in a standard
electrical box, do not mount it directly on a wall.
CONNECTIONS
1. Run 4-Conductor speaker cable from the amplier (positive and
negative for both the left and right channel) to the volume control
marked 1 and 2. Similarly, run 2-conductor speaker cable from
each of the rst pair of speakers to the volume control. Label
the cables for future reference.
2. Measure the depth of the volume control to make sure your
Volume Control will t in the box.
3. Connect the speaker cable to the volume control:
a. Strip 6mm of insulation from the end of each cable.
b. Tightly twist the wires in each cable until there are no frayed
ends.
c. Insert the 4-conductor speaker cable from the amplier into the input terminals.
d. Insert the two 2-conductor speaker cables from the rst pair of speakers into the output terminals.
4. Connect additional speakers in parallel.
5. Make sure that all connections between your amplier and the volume control, and between the volume
control (3) and each speaker, are in “phase”, that is (+) to (+) and (-) to (- ).
6. Turn the volume knob to the “off” position (all the way down.)
7. Screw box into place.
8. Put on faceplate and screw in place using the screws.
Caution: This volume control is limited to a maximum of 50 watts maximum per channel.
SPECIFICATIONS
Power 0 Watts Channel : 5 /
Attenuation : 1st position (slider at bottom): Full o
2nd and 3rd position: attenuate 6 +/- 1 dB per step
4 th through 9 th position: attenuate 3 +/- 1 dB per step
10th position: Full on
Weight 225 gram :
Dimension 70 x 112 x 83mm :

Product specificaties

Merk: Power Dynamics
Categorie: Niet gecategoriseerd
Model: PDVC50

Heb je hulp nodig?

Als je hulp nodig hebt met Power Dynamics PDVC50 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Power Dynamics

Power Dynamics

Power Dynamics CSF6 Handleiding

14 November 2024
Power Dynamics

Power Dynamics PRC120 Handleiding

2 November 2024
Power Dynamics

Power Dynamics FCS8 Handleiding

23 September 2024
Power Dynamics

Power Dynamics MSLP65 Handleiding

23 September 2024
Power Dynamics

Power Dynamics BHW60WH Handleiding

23 September 2024
Power Dynamics

Power Dynamics PMP360 Handleiding

18 Juni 2024
Power Dynamics

Power Dynamics PDCS403V Handleiding

15 Mei 2024
Power Dynamics

Power Dynamics OCS5 Handleiding

15 December 2023
Power Dynamics

Power Dynamics NCSP5 Handleiding

15 December 2023
Power Dynamics

Power Dynamics PRM120 Handleiding

15 December 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Panasonic

Panasonic DMW-LMCH62E Handleiding

23 November 2024
Vitec

Vitec MGW Diamond-HX OG Handleiding

23 November 2024
Electrolux

Electrolux STA9 Handleiding

23 November 2024
Electrolux

Electrolux UMP3 Handleiding

23 November 2024
Electrolux

Electrolux ZS70GL Handleiding

23 November 2024
Bosch

Bosch HEZ8TK36UC Handleiding

23 November 2024
Bosch

Bosch HEZ8ZZ36UC Handleiding

23 November 2024
Bosch

Bosch HDZIT301 Handleiding

23 November 2024
Bosch

Bosch HEZBS301 Handleiding

23 November 2024
LG

LG LX-330 Handleiding

23 November 2024