Power Dynamics BHW60WH Handleiding

Power Dynamics Niet gecategoriseerd BHW60WH

Lees hieronder de 📖 handleiding in het Nederlandse voor Power Dynamics BHW60WH (16 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 4 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/16
BHW ies Ser Speaker
Ref. nr.: 952.180; 952.182; 952.184; 952.186;
952.188; 952.190; 952.192; 952.194
INSTRUCTION MANUAL
GEBRUIKSAANWIJZING
BEDIENUNGSANLEITUNG
MANUAL DE INSTRUCCIONES
MANUEL D'INSTRUCTIONS
INSTRUKCJA OBSŁUGI
NÁVOD K POUŽITÍ
V1.0
2
ENGLISH
Congratulations to the purchase of this Power Dyna product. Please read this manual thoroughly prior to using the unit in mics
order to benefit fully from all features.
Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to
avoid f k. Repairs must only be carried out by a qualified technician in order to avoid electrical shock. ire and/or electrical shoc
Keep the manual for future reference.
- Prior to using the unit, please ask advice from a
specialist. When the unit is switched on for the first time,
some smell may occur. This is normal and will disappear
after a while.
- The unit contains voltage carrying parts. Therefore do
NOT open the housing.
- Do not place metal objects or pour liquids into the unit
This may cause electrical shock and malfunction.
- Do not place the unit near heat sources such as
radiators, etc. Do not place the unit on a vibrating
surface. Do not cover the ventilation holes.
- The unit is not suitable for continuous use.
- Be careful with the mains lead and do not damage it. A
faulty or damaged mains lead can cause electrical shock
and malfunction.
- When unplugging the unit from a mains outlet, always
pull the plug, never the lead.
- Do not plug or unplug the unit with wet hands.
- If the plug and/or the mains lead are damaged, they
need to be replaced by a qualified technician.
- If the unit is damaged to such an extent that internal
parts are visible, do NOT plug the unit into a mains outlet
and DO NOT switch the unit on. Contact your dealer.
- To avoid fire and shock hazard, do not expose the unit to
rain and moisture.
- All repairs should be carried out by a qualified technician
only.
- Connect the unit to an earthed mains outlet (220-
240Vac/50Hz) protected by a 10-16A fuse.
- During a thunderstorm or if the unit will not be used for a
longer period of time, unplug it from the mains. The rule
is: Unplug it from the mains when not in use.
- If the unit has not been used for a longer period of time,
condensation may occur. Let the unit reach room
temperature before you switch it on.
- Never use the unit in humid rooms or outdoors.
- To prevent accidents in companies, you must follow the
applicable guide lines and follow the instructions.
- Do not repeatedly switch the fixture on and off. This
shortens the life time.
- Keep the unit out of the reach of children. Do not leave
the unit unattended.
- Do not use cleaning sprays to clean switches. The
residues of these sprays cause deposits of dust and
grease. In case of malfunction, always seek advice from
a specialist.
- Do not force the controls.
- This unit is with speaker inside which can cause
magnetic field. Keep this unit at least 60cm away from
computer or TV.
- If this product have a built acid rechargeable - -in lead
battery. Please recharge the battery every 3 months if
you are not going to use the product for a long period of
time. Otherwise the battery may be permanently
damaged.
- If the battery is damaged please replace with same
specifications battery. And dispose the damaged battery
environment friendly.
- If the unit has fallen, always have it checked by a
qualified technician before you switch the unit on again.
- Do not use chemicals to clean the unit. They damage the
varnish. Only clean the unit with a dry cloth.
- Keep away from electronic equipment that may cause
interference.
- Only use original spares for repairs, otherwise serious
damage and/or dangerous radiation may occur.
- Switch the unit off prior to unplugging it from the mains
and/or other equipment. Unplug all leads and cables
prior to moving the unit.
- Make sure that the mains lead cannot be damaged when
people walk on it. Check the mains lead before every use
for damages and faults!
- -The mains voltage is 220 240Vac/50Hz. Check if power
outlet match. If you travel, make sure that the mains
voltage of the country is suitable for this unit.
- Keep the original packing material so that you can
transport the unit in safe conditions.
This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient
magnitude to cause a shock hazard.
This mark attracts the attention of the user to important instructions that are contained in the manual and that he should
read and adhere to.
The unit has been certified CE. It is prohibited to make any changes to the unit. They would invalidate the CE certificate and
their guarantee!
NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/ °F 41 and
35 95°C/ °F .
Electric products must not be put into household waste. Please bring them to a recycling . Ask your local authorities or your centre
dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other.
Specifications can be changed without prior notice.
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would also invalid
your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings
contained in this manual. Power Dynamics not be held responsible f sonal injuries caused by a disrespect of the safety can or per
recomm rnings. endations and wa This is also applicable to all damages in whatever form.
3
UNPACKING INSTRUCTION
CAUTION! Carefully unpack the box upon receipt. Check the contents to ensure that all parts are present and have been
received in good condition. Notify the shipper immediately and retain packaging material if any parts appear damaged from
shipping or the package itself shows signs of mishandling. Save the package and all packaging materials. If the product must be
returned, it is important that the product is returned in the original factory box and packaging.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The
arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.
OPERATION
The series speaker both BHW is functional in low impedance-, as well as in 100V/70V Use theuse.
rotary (switch pictured) to set the speaker in the correct working mode. In below case, the speaker is
configured to low impework in 8 Ohm (Ω, dance) setup.
NOTE: V Cabling of a 70/100 system may only be carried out by a qualified electrician! The total load
must not exceed the rated power of the amplifier. If the 70/100V system is turned on, turn it off before
connecting. Make sure the rotary switch on the speaker is turned to “ ” off before connecting.
CAUTION: Never set the switch to “—“ position for 100V line operation, as doing so may result in
unrepairable damage.
LOW IMPEDANCE
The low impedance mode of the BHW series speaker has a nominal impedance of 8Ω. If there is the need to connect multiple
speakers in parallel, be sure to follow the amplifier’s specifications regarding the minimum allowed impedance. Most amplifiers
allow for a minimum of 4Ω impedance, which translates to two BHW series speakers connected in parallel.
70/100 VOLT
U rotse the ary switch to configure the desired power when using the tap BHW series speaker in 70/100V configuration.
Make sure you a powerful are using enough amplifier for your setup of BHW series speakers. It is recommended to have about
20% of reserve power. In below case of the 6” (model 100V), you will need at least roughly 140W of amplifier power
(( + + . 40 40 40) x 1.2 =144W)
MOUNTING
1. Install the metal attachment to the wall using the appropriate screws first.
2. Attach the bracket to the metal attachment with a direction from top to bottom. The speaker-bracket attachment is equipped
with metal contacts allowing for mounting in four directions, enabling installation with enhanced flexibility.
3. To attach the speaker to the bracket hold , please the speaker an angle in so that the top part of the bracket can be inserted
into the speaker first. Then insert the bottom part of the bracket into the speaker until the bracket is clicked and locked.

Product specificaties

Merk: Power Dynamics
Categorie: Niet gecategoriseerd
Model: BHW60WH

Heb je hulp nodig?

Als je hulp nodig hebt met Power Dynamics BHW60WH stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Power Dynamics

Power Dynamics

Power Dynamics FCS8 Handleiding

23 September 2024
Power Dynamics

Power Dynamics MSLP65 Handleiding

23 September 2024
Power Dynamics

Power Dynamics BHW60WH Handleiding

23 September 2024
Power Dynamics

Power Dynamics PMP360 Handleiding

18 Juni 2024
Power Dynamics

Power Dynamics PDCS403V Handleiding

15 Mei 2024
Power Dynamics

Power Dynamics OCS5 Handleiding

15 December 2023
Power Dynamics

Power Dynamics NCSP5 Handleiding

15 December 2023
Power Dynamics

Power Dynamics PRM120 Handleiding

15 December 2023
Power Dynamics

Power Dynamics ICS8 Handleiding

15 December 2023
Power Dynamics

Power Dynamics PDW500MP3 Handleiding

15 December 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

IFM

IFM RM901S Handleiding

23 September 2024
Ecler

Ecler UBWPaCNX-JRC Handleiding

23 September 2024
Cosatto

Cosatto Wow Handleiding

23 September 2024
Segway

Segway Ninebot eKickscooter ZT3 Pro E Handleiding

23 September 2024
Pioneer

Pioneer CA-HM-FIA.001 Handleiding

23 September 2024
Vorago

Vorago MO-600 Handleiding

23 September 2024
Pioneer

Pioneer CA-HM-BMW.006MA Handleiding

23 September 2024
Pioneer

Pioneer CA-HM-ALFA.001S Handleiding

23 September 2024
Pioneer

Pioneer CA-HM-ALFA.001R Handleiding

23 September 2024
Pioneer

Pioneer CA-BC-SUZ.006 Handleiding

23 September 2024