Power Dynamics PDS65B Handleiding

Power Dynamics Niet gecategoriseerd PDS65B

Lees hieronder de 📖 handleiding in het Nederlandse voor Power Dynamics PDS65B (16 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 52 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/16

PDS65 Series Pendant Speaker

Ref. nr.: 952.514; 952.516

INSTRUCTION MANUAL

GEBRUIKSAANWIJZING

BEDIENUNGSANLEITUNG

MANUAL DE INSTRUCCIONES

MANUEL D'INSTRUCTIONS

INSTRUKCJA OBSŁUGI

V1.2

ENGLISH

Congratulations to the purchase of this Power Dynamics product. Please read this manual thoroughly prior to using the unit in

order to benet fully from all features.

Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to

avoid re and/or electrical shock. Repairs must only be carried out by a qualied technician in order to avoid electrical shock.

Keep the manual for future reference.

- Prior to using the unit, please ask advice from a

specialist. When the unit is switched on for the rst time,

some smell may occur. This is normal and will disappear

after a while.

- The unit contains voltage carrying parts. Therefore do

NOT open the housing.

- Do not place metal objects or pour liquids into the unit

This may cause electrical shock and malfunction.

- Do not place the unit near heat sources such as

radiators, etc. Do not place the unit on a vibrating

surface. Do not cover the ventilation holes.

- The unit is not suitable for continuous use.

- Be careful with the mains lead and do not damage it. A

faulty or damaged mains lead can cause electrical shock

and malfunction.

- When unplugging the unit from a mains outlet, always

pull the plug, never the lead.

- Do not plug or unplug the unit with wet hands.

- If the plug and/or the mains lead are damaged, they

need to be replaced by a qualied technician.

- If the unit is damaged to such an extent that internal

parts are visible, do NOT plug the unit into a mains outlet

and DO NOT switch the unit on. Contact your dealer.

- To avoid re and shock hazard, do not expose the unit to

rain and moisture.

- All repairs should be carried out by a qualied technician

only.

- Connect the unit to an earthed mains outlet (220-

240Vac/50Hz) protected by a 10-16A fuse.

- During a thunderstorm or if the unit will not be used for a

longer period of time, unplug it from the mains. The rule

is: Unplug it from the mains when not in use.

- If the unit has not been used for a longer period of time,

condensation may occur. Let the unit reach room

temperature before you switch it on.

- ver use the unit in humid rooms or outdoors. Ne

- To prevent accidents in companies, you must follow the

applicable guide lines and follow the instructions.

- Do not repeatedly switch the xture on and o. This

shortens the life time.

- Keep the unit out of the reach of children. Do not leave

the unit unattended.

- Do not use cleaning sprays to clean switches. The

residues of these sprays cause deposits of dust and

grease. In case of malfunction, always seek advice from

a specialist.

- Do not force the controls.

- This unit is with speaker inside which can cause

magnetic eld. Keep this unit at least 60cm away from

computer or TV.

- If this product have a built-in lead-acid rechargeable

battery. Please recharge the battery every 3 months if

you are not going to use the product for a long period of

time. Otherwise the battery may be permanently

damaged.

- If the battery is damaged please replace with same

specications battery. And dispose the damaged battery

environment friendly.

- If the unit has fallen, always have it checked by a

qualied technician before you switch the unit on again.

- Do not use chemicals to clean the unit. They damage the

varnish. Only clean the unit with a dry cloth.

- Keep away from electronic equipment that may cause

interference.

- Only use original spares for repairs, otherwise serious

damage and/or dangerous radiation may occur.

- Switch the unit o prior to unplugging it from the mains

and/or other equipment. Unplug all leads and cables

prior to moving the unit.

- Make sure that the mains lead cannot be damaged when

people walk on it. Check the mains lead before every use

for damages and faults!

- The mains voltage is 220-240Vac/50Hz. Check if power

outlet match. If you travel, make sure that the mains

voltage of the country is suitable for this unit.

- Keep the original packing material so that you can

transport the unit in safe conditions.

This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sucient

magnitude to cause a shock hazard.

This mark attracts the attention of the user to important instructions that are contained in the manual and that he should

read and adhere to.

The unit has been certied CE. It is prohibited to make any changes to the unit. They would invalidate the CE certicate and

their guarantee!

NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/ °F 41 and

35 95°C/ °F .

Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your

dealer about the way to proceed. The specications are typical. The actual values can slightly change from one unit to the other.

Specications can be changed without prior notice.

Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make an changes to the unit. This would also invalid y

your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings

contained in this manual. Power Dynamics cannot be held responsible for p sonal injuries caused by a disrespect of the safety er

recommendations and warnings. This is also applicable to all damages in whatever form.

UNPACKING INSTRUCTION

CAUTION! Carefully unpack the box upon receipt. Check the contents to ensure that all parts are present and have been

received in good condition. Notify the shipper immediately and retain packaging material if any parts appear damaged from

shipping or the package itself shows signs of mishandling. Save the package and all packaging materials. If the product must be

returned, it is important that the product is returned in the original factory box and packaging.

If the device has been exposed to drastic temperature uctuation (e.g. after transportation), do not switch it on immediately. The

arising condensation water might damage your device. Leave the device switched o until it has reached room temperature.

OPERATION

The PDS65 is functional both in low impedance-, as well as in 100V/70V use Use the switch (as pictured below) to set the .

pendant speaker in the correct working mode. In case, the pendant speaker is congured to work in 8 Ohm ( low below Ω,

impedance) setup The terminal block connector is located near the switch. .

NOTE: Cabling of a 70/100 system may only be carried out by a qualied electrician! The total load must not exceed the rated V

power of the amplier. If the 70/100V system is turned on, turn it o before connecting. Make sure the rotary switch on the

speaker is turned to o before connecting. “ ”

LOW IMPEDANCE

The low impedance mode of t PDS65 he has a nominal impedance of 8Ω. If there is the need to connect multiple speakers in

parallel, be sure to follow the amplifier’s specifications regarding the minimum allowed impedance. Most ampliers allow for a

minimum , which translates two PDS65 speakers connected in parallel. of 4Ω impedance to

* Both left and right amplier output channels can be used in above case.

70/100 VOLT

Use the rotary switch to congure the desired power tap when using the PDS65 in 70/100V conguration (5W, 10W, 20W, 40W

for 100V and 2.5W, 5W, 10W, 20W for V). 70

Make sure you are using a powerful enough amplier for your setup of PDS65 speakers. It is recommended to have about 20%

of reserve power. I below case ( ), you will need at least roughly 140W of amplier power (( + + ) x 1.2 =144W). n 100V 40 40 40

MOUNTING

The PDS65 pendant speaker can be suspended, as well as mounted on (for example) a wall. Before installing, please make

sure that the surface to which you are mounting the speaker, has sucient load-bearing capacity.

For illustrated instructions on how to mount both suspended and (wall)mounted, please refer to nal pages of this manual.

Product specificaties

Merk:	Power Dynamics
Categorie:	Niet gecategoriseerd
Model:	PDS65B
Kleur van het product:	Zwart
Gewicht:	3000 g
Breedte:	280 mm
Diepte:	208 mm
Hoogte:	208 mm
Materiaal behuizing:	Acrylonitrielbutadieenstyreen (ABS)
Internationale veiligheidscode (IP):	IPX5
Gemiddeld vermogen:	40 W
Aanbevolen gebruik:	Tuin
Impedantie:	8 Ohm
Audio-uitgangskanalen:	- kanalen
Speaker plaatsing:	Inbouw in de muur/plafond
Woofer:	Ja
Frequentiebereik:	90 - 20000 Hz
Signaal/ruis-verhouding:	85 dB
Luidspreker soort:	2-weg
Montagebeugels meegeleverd:	Ja
Diameter woofer:	6.5 "
Diameter hogetonenluidspreker:	1 "
Tweeter:	Ja
Geluidsdruk niveau (max):	104 dB