Power Dynamics PD800 Handleiding

Power Dynamics Microfoon PD800

Lees hieronder de 📖 handleiding in het Nederlandse voor Power Dynamics PD800 (8 pagina's) in de categorie Microfoon. Deze handleiding was nuttig voor 43 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/8

PD800 In-Ear monitoring System UHF

Ref. nr.: 179.001

INSTRUCTION MANUAL

GEBRUIKSAANWIJZING

BEDIENUNGSANLEITUNG

MANUAL DE INSTRUCCIONES

MANUEL D'INSTRUCTIONS

INSTRUKCJA OBSŁUGI

V2 .0

ENGLISH

Congratulations to the purchase of this Power Dynamics oduct. Please read this manual thoroughly prior to using the unit in pr

order to benet fully from all features.

Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to

avoid re and/or electrical shock. Repairs must only be carried out by a qualied technician in order to avoid electrical shock.

Keep the manual for future reference.

- Prior to using the unit, please ask advice from a

specialist. When the unit is switched on for the rst time,

some smell may occur. This is normal and will disappear

after a while.

- The unit contains voltage carrying parts. Therefore do

NOT open the housing.

- Do not place metal objects or pour liquids into the unit

This may cause electrical shock and malfunction.

- Do not place the unit near heat sources such as

radiators, etc. Do not place the unit on a vibrating

surface. Do not cover the ventilation holes.

- The unit is not suitable for continuous use.

- Be careful with the mains lead and do not damage it. A

faulty or damaged mains lead can cause electrical shock

and malfunction.

- When unplugging the unit from a mains outlet, always

pull the plug, never the lead.

- Do not plug or unplug the unit with wet hands.

- If the plug and/or the mains lead are damaged, they

need to be replaced by a qualied technician.

- If the unit is damaged to such an extent that internal

parts are visible, do NOT plug the unit into a mains outlet

and DO NOT switch the unit on. Contact your dealer.

- To avoid re and shock hazard, do not expose the unit to

rain and moisture.

- All repairs should be carried out by a qualied technician

only.

- Connect the unit to an earthed mains outlet (220-

240Vac/50Hz) protected by a 10-16A fuse.

- During a thunderstorm or if the unit will not be used for a

longer period of time, unplug it from the mains. The rule

is: Unplug it from the mains when not in use.

- If the unit has not been used for a longer period of time,

condensation may occur. Let the unit reach room

temperature before you switch it on.

- Never use the unit in humid rooms or outdoors.

- To prevent accidents in companies, you must follow the

applicable guide lines and follow the instructions.

- Do not repeatedly switch the xture on and o. This

shortens the life time.

- Keep the unit out of the reach of children. Do not leave

the unit unattended.

- Do not use cleaning sprays to clean switches. The

residues of these sprays cause deposits of dust and

grease. In case of malfunction, always seek advice from

a specialist.

- Do not force the controls.

- This unit is with speaker inside which can cause

magnetic eld. Keep this unit at least 60cm away from

computer or TV.

- If this product have a built-in lead-acid rechargeable

battery. Please recharge the battery every 3 months if

you are not going to use the product for a long period of

time. Otherwise the battery may be permanently

damaged.

- If the battery is damaged please replace with same

specications battery. And dispose the damaged battery

environment friendly.

- If the unit has fallen, always have it checked by a

qualied technician before you switch the unit on again.

- Do not use chemicals to clean the unit. They damage the

varnish. Only clean the unit with a dry cloth.

- Keep away from electronic equipment that may cause

interference.

- Only use original spares for repairs, otherwise serious

damage and/or dangerous radiation may occur.

- Switch the unit o prior to unplugging it from the mains

and/or other equipment. Unplug all leads and cables

prior to moving the unit.

- Make sure that the mains lead cannot be damaged when

people walk on it. Check the mains lead before every use

for damages and faults!

- The mains voltage is 220-240Vac/50Hz. Check if power

outlet match. If you travel, make sure that the mains

voltage of the country is suitable for this unit.

- Keep the original packing material so that you can

transport the unit in safe conditions.

This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sucient

magnitude to cause a shock hazard.

This mark attracts the attention of the user to important instructions that are contained in the manual and that he should

read and adhere to.

The unit has been certied CE. It is prohibited to make any changes to the unit. They would invalidate the CE certicate and

their guarantee!

NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/ °F 41 and

35 95°C/ °F .

Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your

dealer about the way to proceed. The specications are typical. The actual values can slightly change from one unit to the other.

Specications can be changed without prior notice.

Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would also invalid

your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings

contained in this manual. Power Dynamics cannot be held responsible for personal injuries caused by a disrespect of the safety

recommendations and warnings. This is also applicable to all damages in whatever form.

Channel adjustment

1. The “CHANNEL SELECT” icon is used to adjust the transmitter frequency channel.

2. In the main menu , press the “SET” button to the “CHANNEL SELECT” icon.

3. When the “CHANNEL SELECT” icon is displayed, press the “UP” button to increase the channel number or “DOWN”

button to decrease the channel number. When the “UP”/“DOWN” button is pressed longer time, the channel number

will be increased / decreased in a fast manner until the button is released.

4. Once the desired frequency channel is reached, press the “SET” button to save and go to the next menu, if have no

any operation in 5 seconds, the receiver will e in xit to the main status. If press the “POWER” button to exit to the ma

status without saving.

Audio Mode adjustment

1. The “MODE SELECT” icon is used to adjust the transmitter audio inputs mode.

2. In the main menu, press the “SET” button to the “MODE SELECT” icon.

3. When the “MODE SELECT” icon is displayed, press the “UP” button to select “STEREO” mode and “DOWN” button to

select “MONO” mode.

4. Once the desired frequency group is reached, press the “SET” button to save and go to the next menu, if have no any

operation in 5 seconds, the receiver will exit to the main status. If press the “POWER” button to exit to the main status

without save.

Power Mode Adjustment

1. The “POWER SELECT” icon is used to adjust the transmitter radiated power.

2. In the main menu, pres s the “SET” button to the “POWER SELECT” icon.

3. When the “POWER SELECT” icon is displayed, press the “UP” button to select “H” mode for higher radiant power and

“DOWN” button to select “L” mode for lower radiant power.

4. Once the desired frequency group is re e no any ached, press the “SET” button to save and go to the next menu, if hav

operation in 5 seconds, the receiver will exit to the main status. to the main status If press the “POWER” button to exit

without save.

Lock Adjustment

1. The “LOCK SELECT” icon is used to lock all the transmitter settings.

2. In the main menu, p ress the “SET” button to the “LOCK SELECT” icon.

3. When the “LOCK SELECT” icon is displayed, press the “UP” button to select “LOC OFF” mode and “DOWN” button to K

select “LOC ON” mode.K

4. Once ve and go to the next menu, if have no any the desired frequency group is reached, press the “SET” button to sa

operation in 5 seconds, the receiver will exit to the main status. If press the “POWER” button to exit to the main status

without save.

INSERT BATTERIES IN THE RECEIVER

Insert two 1.5V AA batteries to control the receiver. Open the receiver's front cover and insert the batteries as shown in the

battery compartment. The display shows the capacity of the batteries: When the battery indicator ashes, the batteries are

empty and the receiver will automatically switch o shortly after. If the receiver is not used for a long period (approx. 1-2 weeks),

remove the batteries to protect the device from possible leakage.

Product specificaties

Merk:	Power Dynamics
Categorie:	Microfoon
Model:	PD800
Ingebouwd display:	Ja
Gewicht:	2300 g
Breedte:	210 mm
Diepte:	170 mm
Hoogte:	45 mm
Display technologie:	LCD
Ingangsspanning:	100/240 V
Stroomverbruik:	23 mA
Signaal/ruis-verhouding:	105 dB
Frequentie bereik:	863000 - 865000 MHz
Type product:	Draadloze monitoringsysteemsets