Power Dynamics PD524 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Power Dynamics PD524 (24 pagina's) in de categorie Microfoon. Deze handleiding was nuttig voor 53 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/24
PD524 Series UHF Digital Wireless Microphone
Ref. nr.: 179.024; 0 179. 26
INSTRUCTION MANUAL
GEBRUIKSAANWIJZING
BEDIENUNGSANLEITUNG
MANUAL DE INSTRUCCIONES
MANUEL D'INSTRUCTIONS
INSTRUKCJA OBSŁUGI
NÁVOD K POUŽITÍ
V1.1
2
ENGLISH
Congratulations to the purchase of this Power Dynamics product. Please read this manual thoroughly prior to using the unit in
order to benet fully from all features.
Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to
avoid re and/or electrical shock. Repairs must only be carried out by a qualied technician in order to avoid electrical shock.
Keep the manual for future reference.
- Prior to using the unit, please ask advice from a
specialist. When the unit is switched on for the rst time,
some smell may occur. This is normal and will disappear
after a while.
- The unit contains voltage carrying parts. Therefore do
NOT open the housing.
- Do not place metal objects or pour liquids into the unit
This may cause electrical shock and malfunction.
- Do not place the unit near heat sources such as
radiators, etc. Do not place the unit on a vibrating
surface. Do not cover the ventilation holes.
- The unit is not suitable for continuous use.
- Be careful with the mains lead and do not damage it. A
faulty or damaged mains lead can cause electrical shock
and malfunction.
- When unplugging the unit from a mains outlet, always
pull the plug, never the lead.
- Do not plug or unplug the unit with wet hands.
- If the plug and/or the mains lead are damaged, they
need to be replaced by a qualied technician.
- If the unit is damaged to such an extent that internal
parts are visible, do NOT plug the unit into a mains outlet
and DO NOT switch the unit on. Contact your dealer.
- To avoid re and shock hazard, do not expose the unit to
rain and moisture.
- All repairs should be carried out by a qualied technician
only.
- Connect the unit to an earthed mains outlet (220-
240Vac/50Hz) protected by a 10-16A fuse.
- During a thunderstorm or if the unit will not be used for a
longer period of time, unplug it from the mains. The rule
is: Unplug it from the mains when not in use.
- If the unit has not been used for a longer period of time,
condensation may occur. Let the unit reach room
temperature before you switch it on.
- Never use the unit in humid rooms or outdoors.
- To prevent accidents in companies, you must follow the
applicable guide lines and follow the instructions.
- Do not repeatedly switch the xture on and o. This
shortens the life time.
- Keep the unit out of the reach of children. Do not leave
the unit unattended.
- Do not use cleaning sprays to clean switches. The
residues of these sprays cause deposits of dust and
grease. In case of malfunction, always seek advice from
a specialist.
- Do not force the controls.
- This unit is with speaker inside which can cause
magnetic eld. Keep this unit at least 60cm away from
computer or TV.
- If this product has a built-in lead-acid rechargeable
battery: please recharge every 3 months if you are not
going to use the product for a long period of time.
Otherwise the battery may be permanently damaged.
- If the battery is damaged please replace with same
specications battery. And dispose the damaged battery
environment friendly.
- If the unit has fallen, always have it checked by a
qualied technician before you switch the unit on again.
- Do not use chemicals to clean the unit. They damage the
varnish. Only clean the unit with a dry cloth.
- Keep away from electronic equipment that may cause
interference.
- Only use original spares for repairs, otherwise serious
damage and/or dangerous radiation may occur.
- Switch the unit o prior to unplugging it from the mains
and/or other equipment. Unplug all leads and cables
prior to moving the unit.
- Make sure that the mains lead cannot be damaged when
people walk on it. Check the mains lead before every use
for damages and faults!
- The mains voltage is 220-240Vac/50Hz. Check if power
outlet match. If you travel, make sure that the mains
voltage of the country is suitable for this unit.
- Keep the original packing material so that you can
transport the unit in safe conditions.
This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sucient
magnitude to cause a shock hazard.
This mark attracts the attention of the user to important instructions that are contained in the manual and that he should
read and adhere to.
The unit has been certied CE. It is prohibited to make any changes to the unit. They would invalidate the CE certicate and
their guarantee!
NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/ °F 41 and
35°C/ °F 95 .
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your
dealer about the way to proceed. The specications are typical. The actual values can slightly change from one unit to the other.
Specications can be changed without prior notice.
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would also invalid
your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings
contained in this manual. Power Dynamics cannot be held responsible for personal injuries caused by a disrespect of the safety
recommendations and warnings. This is also applicable to all damages in whatever form.
3
UNPACKING INSTRUCTION
CAUTION! Carefully unpack the box upon receipt. Check the contents to ensure that all parts are present and have been
received in good condition. Notify the shipper immediately and retain packaging material if any parts appear damaged from
shipping or the package itself shows signs of mishandling. Save the package and all packaging materials. If the product must be
returned, it is important that the product is returned in the original factory box and packaging. If the device has been exposed to
drastic temperature uctuation (e.g. after transportation), do not switch it on immediately. The arising condensation water might
damage your device. Leave the device switched o until it has reached room temperature.
POWERSUPPLY
The label on the back/under side of the product indicates the mains voltage to which it must be connected. Check that the mains
voltage corresponds to this. Any other voltage than the one indicated may cause irreparable damage to the unit. The unit must
also be connected directly to the mains voltage and no dimmer or adjustable power supply may be used.
Always connect the device to a protected circuit (circuit breaker or fuse). Make sure the device has an appropriate
electrical ground to avoid the risk of electrocution or re.
RECEIVER OVERVIEW FRONT
1. Power On /Off
Switch to turn the device on/o.
2. LCD display
Shows the frequency, channel,
volume and signal.
3. Lock button
Locks the group -4). (1
4. Group button
With this button you can set the frequency by group.
5. IR sensor
Infrared transmitter for synchronizing frequencies between receiver and handheld transmitters.
6. IR button
Button to select the channel to be synchronized with a handheld transmitter.
7. Set
Press to switch between frequency- and volume setting modes. Rotate the rotary dial to select the desired values.
8. Rotary dial
Rotate to change the volume- and frequency values.
RECEIVER OVERVIEW REAR
1. Antenna connectors
2. Mix out
Unbalanced microphone output
connector (6.3mm jack) for
channels 1-4.
3. XLR connector
XLR balanced microphone outputs for connecting to (for example) mixers, power ampliers or other audio devices.
4. Power input for 12V adapter
Connector for inserting the supplied power adapter.
5. Transmitter charge
USB connectors for recharging the handheld transmitters.
RECEIVER OPERATION
Switch on the receiver. The LCD will light up.
SET Select the frequency by pressing the button. Turn the rotary dial to the desired setting and then press SET to save. By
pressing twice you can adjust the volume level. SET
Pressing the group button allows you to set the desired frequency for the group by rotating the rotary dial.
When you press the lock button the group -4) is locked and changes can be made in the settings. (1 no
RECEIVER DISPLAY
1. Channel
Shows the corresponding channel.
2. Volume
Shows the volume level of the corresponding channel.
3. Lock
Shows frequency lock status of the corresponding channel.
4. Frequency
Indicates the channels’ frequency.
5. RF signal
Indicates the RF signal strength.
6. AF signal
Indicates the audio signal strength.


Product specificaties

Merk: Power Dynamics
Categorie: Microfoon
Model: PD524

Heb je hulp nodig?

Als je hulp nodig hebt met Power Dynamics PD524 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Microfoon Power Dynamics

Handleiding Microfoon

Nieuwste handleidingen voor Microfoon

BOYA

BOYA BY-V4 Handleiding

30 September 2024
BOYA

BOYA BY-WM3T Handleiding

30 September 2024
Krom

Krom Kyp Handleiding

23 September 2024
Elgato

Elgato Wave Neo Handleiding

11 September 2024
Røde

Røde XDM-100 Handleiding

6 September 2024
Røde

Røde PodMic USB Handleiding

6 September 2024
Valcom

Valcom V-400 Handleiding

5 September 2024