Posiflex CD-3860UN Handleiding

Posiflex Barcode lezer CD-3860UN

Lees hieronder de 📖 handleiding in het Nederlandse voor Posiflex CD-3860UN (55 pagina's) in de categorie Barcode lezer . Deze handleiding was nuttig voor 36 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/55

Important Notice

No warranty of any kind is made in regard to this material, including, but not limited to,

implied warranties of merchantability or fitness for any particular purpose. We are not

liable for any errors contained herein nor for incidental or consequential damages in

connection with furnishing, performance or use of this material. We shall be under no

liability in respect of any defect arising from fair wear and tear, willful damage,

negligence, abnormal working conditions, failure to follow the instructions and warnings,

or misuse or alteration or repair of the products without written approval. No part of this

document may be reproduced, transmitted, stored in a retrieval system, transcribed, or

translated into any human or computer or other language in any form or by any means

electronic, mechanical, magnetic, optical, chemical, biological, manual or otherwise,

except for brief passages which may be quoted for purposes of scholastic or literary

review, without express written consent and authorization. We reserve the right to make

changes in product design without reservation and without notification. The material in

this guide is for information only and is subject to change without notice. All trademarks

mentioned herein, registered or otherwise, are the properties of their various, ill,

assorted owners.

General Handling Precautions

Do not dispose of the scanner in fire.

Do not put the scanner directly in the sun or by any heat source.

Do not use or store the scanner in a very humid place.

Do not drop the scanner or allow it to collide violently with other objects.

Do not take the scanner apart without authorization.

Printing Guidance

This programming guide is in A5 size. Please double check your printer setting before

printing it out.

When barcodes are to be printed out for programming, the use of a high-resolution laser

printer is strongly suggested for the best scan result.

CD-3860 Bar Code Scanner

User’s Manual

Rev. Original

For CE-Countries

This scanner is in conformity with CE standards. Please note that an approved, CE-marked

power supply unit should be used in order to maintain CE conformance.

Table of Contents

About This Guide ........................................................................................................3

Introduction to Scanner Configuration.......................................................................3

Default Parameters .....................................................................................................4

Scanner Operation........................................................................4

Interface Communication.............................................................4

Symbologies..................................................................................5

Data Formating.............................................................................6

Programming Procedure.............................................................................................7

Parameter Setting.......................................................................................................8

Scanner Operation........................................................................8

Interface Configuration...............................................................16

The Symbologies.........................................................................24

Data Editing ................................................................................46

Appendix 1: USB Virtual COM Driver Installation ......................49

Appendix 2: Barcode Length Setting ..........................................50

Appendix 3: Full ASCII Code 39 Table.........................................51

About This Guide

This programming guide applies to various handheld scanners, including

* Advanced Handheld Contact CCD Scanner,

* Advanced Middle-Range Handheld CCD Scanner,

Some settings are not available for certain models. If you are not sure about the

model of your scanner at hand, refer to the device label or contact your distributor.

This document is in A5 size. Please check your printing setting before printing it out.

When barcodes are to be printed out for programming, the use of a high-resolution

laser printer is strongly suggested for the best scan result.

The settings herein shall be updated periodically without prior notice. For the latest

version, please contact your distributor.

Introduction to Scanner Configuration

Scanning a series of programming barcode labels can configure the series scanners.

This allows decoding options and interface protocols to be tailored to a specific

application. The configuration is stored in non-volatile memory and will not be lost by

removing power from the scanner.

The scanner must be properly powered before programming. For RS-232C type

scanners, an external power adapter must be used to supply DC power to the scanner.

If a keyboard emulation type scanner is used with an IBM PC/XT/ AT, PS/2 or any fully

compatible computers, power will be drawn from the keyboard port. No external

power adapter is required. If keyboard emulation type scanner is used with any other

non IBM PC compatible computers, an external power adapter may be needed.

Programmable options are divided into four groups. The second group governs the

operation of different interfaces, RS-232 serial ports, keyboard, and USB. The third

group sets the decoding parameters for each barcode symbology. The last group is

about more advanced data formatting.

Product specificaties

Merk:	Posiflex
Categorie:	Barcode lezer
Model:	CD-3860UN
Kleur van het product:	Zwart
Gewicht:	120 g
Snoerlengte:	2 m
Ingangsspanning:	5 V
Temperatuur bij opslag:	-20 - 60 °C
Stroomverbruik:	110 mA
Standaard interfaces:	PS/2, RS-232, USB
Afmetingen (B x D x H):	152.3 x 64.4 x 104.9 mm
Bedrijfstemperatuur (T-T):	0 - 50 °C
Relatieve vochtigheid in bedrijf (V-V):	5 - 95 procent