Porter-Cable PCE360 Handleiding

Porter-Cable Zaagmachine PCE360

Lees hieronder de 📖 handleiding in het Nederlandse voor Porter-Cable PCE360 (32 pagina's) in de categorie Zaagmachine. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/32

Gracias por elegir PORTER-CABLE usted! Para registrar su nuevo producto,

visite: www.portercable.com / ServiceAndSupport / ProductRegistration.aspx

Merci d’avoir choisi PORTER-CABLE! Consulter le site Web www.portercable.com/

ServiceAndSupport/ProductRegistration.aspx pour enregistrer votre nouveau produit.

Thank you for choosing PORTER-CABLE! To register your new product, go to:

www.portercable.com/ServiceAndSupport/ProductRegistration.aspx

INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA.

ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES

DE USAR EL PRODUCTO.

7.5A RECIPROCATING SAW

7,5A SCIE ALTERNATIVE

7,5A SIERRA ALTERNATIVA

CATALOG NUMBER

N° DE CATALOGUE

CATÁLOGO N°

PCE360

INSTRUCTION MANUAL

MANUEL D’INSTRUCTIONS

MANUAL DE’INSTRUCCIONES

www.portercable.com

GENERAL POWER TOOL

SAFETY WARNINGS

WARNING:

Read all safety warnings

and all instructions. Failure to follow the

warnings and instructions may result in electric

shock, fire and/or serious injury.

SAVE ALL WARNINGS AND

INSTRUCTIONS FOR FUTURE REFERENCE

The term “power tool” in the warnings

refers to your mains-operated

(corded) power tool or battery-

operated (cordless) power tool.

1) WORK AREA SAFETY

a) Keep work area clean and well

lit. Cluttered or dark areas invite

accidents.

b) Do not operate power tools in

explosive atmospheres, such

as in the presence of flammable

liquids, gases or dust. Power tools

create sparks which may ignite the

dust or fumes.

c) Keep children and bystanders

away while operating a power

tool. Distractions can cause you to

lose control.

2) ELECTRICAL SAFETY

a) Power tool plugs must match the

outlet. Never modify the plug in

any way. Do not use any adapter

plugs with earthed (grounded)

power tools. Unmodified plugs and

matching outlets will reduce risk of

electric shock.

b) Avoid body contact with earthed

or grounded surfaces such as

pipes, radiators, ranges and

refrigerators. There is an increased

risk of electric shock if your body is

earthed or grounded.

c) Do not expose power tools to rain

or wet conditions. Water entering

a power tool will increase the risk of

electric shock.

d) Do not abuse the cord. Never use

the cord for carrying, pulling or

unplugging the power tool. Keep

cord away from heat, oil, sharp

edges or moving parts. Damaged

or entangled cords increase the risk

of electric shock.

e) When operating a power tool

outdoors, use an extension cord

suitable for outdoor use. Use of a

cord suitable for outdoor use reduces

the risk of electric shock.

If operating a power tool in a damp

location is unavoidable, use a

ground fault circuit interrupter

(GFCI) protected supply. Use of a

GFCI reduces the risk of electric shock.

3) PERSONAL SAFETY

a) Stay alert, watch what you are

doing and use common sense

when operating a power tool. Do

not use a power tool while you

are tired or under the influence

of drugs, alcohol or medication.

A moment of inattention while

operating power tools may result in

serious personal injury.

Use personal protective

equipment. Always wear eye

protection. Protective equipment

such as dust mask, nonskid safety

shoes, hard hat, or hearing protection

used for appropriate conditions will

reduce personal injuries.

c) Prevent unintentional starting.

Ensure the switch is in the off

position before connecting to

power source and/ or battery

pack, picking up or carrying the

tool. Carrying power tools with your

finger on the switch or energizing

power tools that have the switch on

invites accidents.

Remove any adjusting key or

wrench before turning the power

tool on. A wrench or a key left

attached to a rotating part of the power

Definitions: Safety Alert Symbols and Words

This instruction manual uses the following safety alert symbols and words to alert you

to hazardous situations and your risks of personal injury or property damage.

DANGER: Indicates an imminently hazardous situation which, if not avoided, will

result in death or serious injury.

WARNING: Indicates a potentially hazardous situation which, if not avoided,

could result in death or serious injury.

CAUTION: Indicates a potentially haz ard ous situation which, if not avoided, may

result in minor or mod er ate injury.

NOTICE: Used without the safety alert symbol indicates potentially hazardous

situation which, if not avoided, may result in property damage.

tool may result in personal injury.

e) Do not overreach. Keep proper

footing and balance at all times.

This enables better control of the

power tool in unexpected situations.

f) Dress properly. Do not wear loose

clothing or jewelry. Keep your

hair, clothing and gloves away

from moving parts. Loose clothes,

jewelry or long hair can be caught in

moving parts.

g) If devices are provided for the

connection of dust extraction and

collection facilities, ensure these

are connected and properly used.

Use of dust collection can reduce

dust-related hazards.

4) POWER TOOL USE AND CARE

a) Do not force the power tool. Use

the correct power tool for your

application. The correct power tool

will do the job better and safer at the

rate for which it was designed.

b) Do not use the power tool if the

switch does not turn it on and

off. Any power tool that cannot

be controlled with the switch is

dangerous and must be repaired.

c) Disconnect the plug from the

power source and/or the battery

pack from the power tool before

making any adjustments,

changing accessories, or storing

power tools. Such preventive safety

measures reduce the risk of starting

the power tool accidentally.

d) Store idle power tools out of

the reach of children and do not

allow persons unfamiliar with the

power tool or these instructions

to operate the power tool. Power

tools are dangerous in the hands of

untrained users.

e) Maintain power tools. Check

for misalignment or binding of

moving parts, breakage of parts

and any other condition that may

affect the power tool’s operation.

If damaged, have the power

tool repaired before use. Many

accidents are caused by poorly

maintained power tools.

Keep cutting tools sharp and clean.

Properly maintained cutting tools with

sharp cutting edges are less likely to

bind and are easier to control.

g) Use the power tool, accessories

and tool bits, etc. in accordance

with these instructions, taking into

account the working conditions

and the work to be performed.

Use of the power tool for operations

different from those intended could

result in a hazardous situation.

5) SERVICE

a) Have your power tool serviced by

a qualified repair person using

only identical replacement parts.

This will ensure that the safety of the

power tool is maintained.

Specific Safety Rules

• Hold power tool by insulated gripping

surfaces, when performing an

operation where the cutting accessory

may contact hidden wiring or its own

cord. Cutting accessory contacting a

“live” wire may make exposed metal

parts of the power tool “live” and could

give the operator an electric shock.

• Use clamps or another practical way

to secure and support the work piece

to a stable platform. Holding the work

by hand or against your body leaves it

unstable and may lead to loss of control.

• Hold saw firmly with both hands for

all cutting operations. During cutting

operations, the blade may suddenly

bind in the work and may cause the saw

to kickback towards the operator.

• Keep hands away from cutting area.

Never reach underneath the material

for any reason. Hold front of saw by

grasping the contoured gripping area.

Do not insert fingers or thumb into the

vicinity of the reciprocating blade and

blade clamp. Do not stabilize the saw by

gripping the shoe.

• Keep blades sharp. Dull blades may

cause the saw to swerve or stall under

pressure.

• Use extra caution when cutting

overhead and pay particular attention

to overhead wires, gas or water lines,

which may be hidden from view.

Anticipate the path of falling branches

and debris ahead of time.

• When cutting pipe or conduit ensure

that they are free from water, electrical

wiring, etc.

• Do not touch the workpiece or the

blade immediately after operating the

tool. They can become very hot.

WARNING: ALWAYS use safety

glasses. Everyday eyeglasses are NOT

safety glasses. Also use face or dust

mask if cutting operation is dusty.

ALWAYS WEAR CERTIFIED SAFETY

EQUIPMENT:

• ANSI Z87.1 eye protection (CAN/CSA

Z94.3),

Product specificaties

Merk:	Porter-Cable
Categorie:	Zaagmachine
Model:	PCE360

Heb je hulp nodig?

Als je hulp nodig hebt met Porter-Cable PCE360 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Zaagmachine Porter-Cable

Porter-Cable PCCM300 Handleiding

18 December 2023

Porter-Cable PCCS340 Handleiding

15 Augustus 2023

Porter-Cable PCE345 Handleiding

19 April 2023

Porter-Cable PCE300 Handleiding

3 April 2023

Porter-Cable PCE310 Handleiding

19 Maart 2023

Porter-Cable PCCS300 Handleiding

8 Maart 2023

Porter-Cable PCE360 Handleiding

8 Maart 2023

Porter-Cable PC85TRSOK Handleiding

8 Maart 2023

Porter-Cable PCCS500 Handleiding

7 Maart 2023

Porter-Cable PCXB310BS Handleiding

26 Februari 2023

Handleiding Zaagmachine

Nieuwste handleidingen voor Zaagmachine

Herkules KS 210 Profi Handleiding

17 December 2024

Total TS730301 Handleiding

16 December 2024

Total TJSLI8501 Handleiding

16 December 2024

Turbo-Silent EKS 2040/1 Handleiding

16 December 2024

Bavaria BJS 400 Handleiding

5 December 2024

Bavaria BCS 64/1 Handleiding

5 December 2024

Bavaria BEC 2040 TC Handleiding

5 December 2024

Einhell RT-SB 250 U Handleiding

4 December 2024

Einhell NSMS 4300 ZZ Handleiding

4 December 2024

Einhell RT-TS 2231 UD Handleiding

4 December 2024