Polk PSW505 Handleiding

Polk Subwoofer PSW505

Lees hieronder de 📖 handleiding in het Nederlandse voor Polk PSW505 (12 pagina's) in de categorie Subwoofer. Deze handleiding was nuttig voor 54 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/12

LS Models

Modèles LS

Modelos LS

900-ls

700-ls

500-ls

RT Models

Modèles RT

Modelos RT

90-rt

70-rt

50-rt

2 Polk Audio Customer Service: 1-800-377-7655 (Outside US & Canada: 410-358-3600) Monday-Friday, 9:00 AM-5:30 PM EST, polkcs@polkaudio.com

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

READ BEFORE OPERATING EQUIPMENT

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings.

Install in accordance with the

manufacturer’s instructions.

8. Do not install near any heat sources

such as radiators, heat registers, stoves,

or other apparatus (including amplifiers)

that produce heat.

9. Refer all servicing to qualified service

personnel. Servicing is required when the

apparatus has been damaged in any way,

liquid has been spilled or objects have fallen

into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate

normally, or has been dropped.

10. WARNING: To reduce the risk of fire or

electric shock, this apparatus should not be

exposed to rain or moisture and objects filled

with liquids, such as vases, should not be

placed on this apparatus.

Product Disposal—Certain interna-

tional, national and/or local laws and/

or regulations may apply regarding

the disposal of this product. For further

detailed information, please contact

the retailer where you purchased this

product or the Polk Audio Importer/

Distributor in your country. A listing of Polk Audio

Importer/Distributors can be found on the Polk Audio

website www.polkaudio.com or by contacting

Polk Audio at 5601 Metro Drive, Baltimore,

Maryland 21215, USA—Phone: +1 410 358-3600.

WARNING: Listen Carefully

Polk Audio loudspeakers and subwoofers are

capable of playing at extremely high volume levels,

which could cause serious or permanent hearing

damage. Polk Audio, Inc. accepts no liability for

hearing loss, bodily injury or property damage

resulting from the misuse of its products.

Keep these guidelines in mind and always use

your own good judgment when controlling volume:

 • Youshouldlimitprolongedexposureto

volumes that exceed 85 decibels(dB).

For more about safe volume levels, go to the

Occupational Health and Safety Administration

(OSHA) guidelines at http://www.osha.gov/dts/

osta/otm/noise/standards_more.html

TAKE INVENTORY

Inside each speaker container, you should

find the following:

1. One In-Ceiling Loudspeaker

2. One Sheer-Grille™

3. Mounting Template

4. Owner’s Manual

5. Registration Card

Important Note: If anything is missing or

damaged, or if your speaker fails to operate,

notify Polk Audio Customer Support Services

immediately at 800-377-7655.

INSTALLATION RECOMMENDATION

FOR OPTIMUM PERFORMANCE

Important Note: Vanishing Series Loudspeakers

are not magnetically shielded and should not be

placed closer than 1 (30cm) from a CRT (tube) '

television or video monitor.

Important Note:Youshouldhaveathorough

understanding of and adhere to all local building

and fire codes. Also, you should be familiar with

the area behind the wall or ceiling into which you

plan to install your speakers. Always use wire that

meets appropriate building and fire codes. Wiring

is best performed by an experienced professional.

When installing your loudspeakers, be aware of

the weight of your particular model and the sturdi-

ness of the material into which you are installing

the speakers. Be aware of any concealed studs,

electrical wiring or plumbing in the wall or ceiling

into which you are installing the speakers.

If you doubt that you possess the necessary

skills or tools, consult your Polk Audio dealer

or a professional installer.

WIRE RECOMMENDATIONS

(minimum recommended)

Runs Gauge

Lengths up to 25' 18 or 16

Lengths greater than 25' 16 or 14

but less than 50'

Lengths greater than 50' 14 or 12

but less than 75'

Lengths greater than 75' 12

IMPORTANT INFORMATION BEFORE

YOU INSTALL YOUR LOUDSPEAKERS

Wall Or Ceiling Surface Preparation

If you’re installing your Vanishing Series speaker

into a heavily textured wall or ceiling (e.g. stucco

or popcorn finish), you must prepare the wall

surface immediately around the speaker

cutout. Sanding and smoothing the wall or

ceiling surface will ensure the speaker and

grille both seat properly and flat to the surface.

LOUDSPEAKER INSTALLATION

You will need:

 • Pencilformarkingthelocationofinstallation.

 • Keyholesaw,utilityknifeormaterial-

appropriate tool for cutting drywall

or other wall material.

 • Screwdriver,preferablypowered,

with Phillips Head bit.

 • Powerdrillwithappropriatebit

(optional, for starting wall cut).

Trace around the template.

Cut the hole with the appropriate tool.

CROSSOVER WARNING

Exercise extreme caution when installing this

loudspeaker so you do not damage the crossover.

SECURITY EYEBOLT

YourVanishingSeriesin-ceilingloudspeaker

has an eyebolt on the back of the speaker that

can be used for an extra measure of installation

security. Follow standard building code installation

procedures in your area.

eyebolt

For more information visit our website at www.polkaudio.com 3

IMPORTANT INFORMATION SHOULD

YOU CHOOSE TO PAINT YOUR GRILLES

Because of its ultra-thin profile, the Vanishing

Series Sheer-Grille

™ requires a specific painting

procedure to ensure smooth, even coverage.

Important Note: Do not remove the grille

scrim before painting.

Paint Recommendation

We highly recommend you use a can of spray

paint matched to the ceiling color you want

the Sheer-Grilles to blend with.

Important Note: Never use a brush or

roller to paint the grilles, as this will clog

the perforated holes.

To paint the Sheer-Grille

1. Elevate the Sheer-Grille off of a flat surface.

This will ensure even coverage of the grille

frame and make it easier to pick up.

Mounting Idea: A single spray can cap

will raise the grille high enough.

2. Hold the spray paint about 12 from "

the grille and at a 45° angle.

3. Apply one light, thin coat, moving evenly

side to side over the grille, then work your

way around the perimeter of the grille

to ensure you cover the grille frame.

4. After each application of paint, wait

approximately 1 minute, rotate the

grille 90°, and apply the next thin coat.

Important Note:Youmustrotatethegrille

90°. Use your hands to define the next 90°

rotation and always rotate the grille in the

same direction of travel.

5. Three light, even applications should cover

the grille and frame adequately. Remember

to work your way around the grille frame

to cover it evenly and completely.

ROOM ENvIRONMENT CONTROLS

Room Switch

If your listening room is very reflective, with

smooth sheetrock walls, hardwood floors and

non-cushioned furniture, the sound will be

overly “bright” and unnatural.

Engaging the Room Switch (Reflective) compen-

sates for the effect of reflectivity in a “hard room”

by attenuating only the portion of the tweeter

response that can cause harshness resulting

in listener fatigue. This flattens room response

without hindering higher frequency response,

for warmer, more realistic sound and more

accurate imaging.

If your listening room is not highly reflective,

that is it has curtains, carpeting, and cushioned

furniture, leave the Room Switch in its Normal

setting (Norm).

Wall Distance Switch ( )LS models only

In-ceiling loudspeakers excel when placed

more than 2' (60cm) from side walls. If position

limitations demand that in-ceiling loudspeakers

be installed closer than 2' (60cm) from side walls,

the proximity of the surface can result in a response

“bump” between 50Hz and 200Hz. This can cause

in-ceiling speakers to sound “boomy.” The

“Wall Distance” switch flattens response

and eliminates “boominess” without sacrificing

deep bass response, for more lifelike sound.

Reflective / Norm

Room

Wall Dist.

>2'

(60cm)(60cm)

<2'

Product specificaties

Merk:	Polk
Categorie:	Subwoofer
Model:	PSW505
Kleur van het product:	Zwart
Gemiddeld vermogen subwoofer:	300 W
Diameter driver subwoofer (imperiaal):	12 "
Subwoofertype:	Actieve subwoofer
Frequentiebereik subwoofer:	23 - 160 Hz
Breedte van de subwoofer:	384.2 mm
Hoogte van de subwoofer:	409.6 mm
Diepte van de subwoofer:	462 mm
Gewicht subwoofer:	21772 g
Aantal subwoofers:	1
Diameter driver subwoofer:	304.8 mm
Subwoofer maximale vermogen:	460 W