Polk Monitor XT10 Handleiding

Polk Subwoofer Monitor XT10

Lees hieronder de 📖 handleiding in het Nederlandse voor Polk Monitor XT10 (64 pagina's) in de categorie Subwoofer. Deze handleiding was nuttig voor 41 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/64
OWNERS MANUAL
Monitor XT10™
GUIDE DE DÉMARRAGE RAPIDE | GA DE INICIO PIDO | GUIDA RAPIDA |
SCHNELLSTARTANLEITUNG | SKCONA INSTRUKCJA OBSŁUGI | SNABBSTARTSGUIDE |
SNELSTARTGIDS | 快速入门指南 |
English
Check that the following items came in the box.
Unpack
Monitor XT10
Subwoofer Power Cable Documentation
For an optimal listening experience, placement is everything. Place the subwoofer in one of the
configurations below, and make adjustments according to your preferences.
Position the subwoofer
1
2
OR
Listening with one subwoofer
For a single-subwoofer setup, position the subwoofer on
either side of the front speakers and along the same wall.
For the best sound and minimal distortion, the subwoofer
should be positioned approximately 6 inches from the wall.
For optimal performance:
Do not place the subwoofer in the middle of the
listening area.
Ensure each subwoofer is at least 6 inches from the
wall.
Experiment with placement. Moving the subwoofer a
few feet in any direction can make a big difference.
Listening with multiple subwoofers
For a multi-subwoofer setup, position the first subwoofer on either side of the front speakers and along the
same wall. Position the second subwoofer in an opposite, diagonal position from the first subwoofer.
Set up the subwoofer
English
Plug in the power cable
Plug the power cable into the subwoofer, then into a wall outlet.
Connect the subwoofer to your amplifier or AVR
4
Select one of the two options below to connect the subwoofer to your amplifier or receiver.
NOTE: Make sure the subwoofer isn’t plugged into AC power before connecting it to your amplifier/receiver.
Line in setup
This method is recommended for systems with no LFE/subwoofer output jack, such as 2-channel systems.
1. Turn off the power on your amplifier/receiver.
2. Connect standard RCA cables from the front left and right pre-out jacks of the amplifier/receiver.
3. Set the volume knob to the 12 o’clock position.
4. Adjust the low-pass filter knob to blend the subwoofer and main speakers to your preferences.
LFE setup
1. Turn off the power on your amplifier/receiver.
2. Connect the LFE cable from your receiver to the left white RCA line input on the subwoofer.
NOTE: The ‘left white RCA line input’ is labeled as ‘L/LFE’.
3. Turn the low-pass filter knob on the subwoofer to 160 Hz.
4. Set the volume knob to the 12 o’clock position.
5. Follow the bass management instructions on your amplifier or AVR to integrate the subwoofer.
3
Setup is now complete!
Watch TV or listen to music and adjust the subwoofer settings to your preferences. See the next page for a
diagram of the subwoofer back panel.
For support, FAQs, and more information about the subwoofer, visit polkaudio.com/MonitorXT10.
5


Product specificaties

Merk: Polk
Categorie: Subwoofer
Model: Monitor XT10

Heb je hulp nodig?

Als je hulp nodig hebt met Polk Monitor XT10 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Subwoofer Polk

Handleiding Subwoofer

Nieuwste handleidingen voor Subwoofer