Polar Equine Wearlink Handleiding

Polar Niet gecategoriseerd Equine Wearlink

Lees hieronder de 📖 handleiding in het Nederlandse voor Polar Equine Wearlink (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 207 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
Polar Equine Wearlink
1. Placing the WearLink belt and
transmitter
Place the WearLink belt as indicated, with the
transmitter pocket on the left side of the horse.
By doing so, you ensure the electrodes of the
belt are in the right position.
Clip the transmitter to its contact points, as
indicated.
Then close the pocket by using the velcro
straps.
This pocket protects your transmitter from
shocks and scratches and prevent it from falling
off the belt.
The range of the WearLink transmitter is over
10m, therefore you can follow your horse’s
heart rate when working with a leash.
Using contact gel on the
electrodes of the WearLink belt
is highly recommended. It
ensures a better detection of
the horse’s heart rate.
The hypo-allergenic and
chloride-free electrode gels
ensure a better conductivity.
Non-thinning formula will not
break down or irritate after
lengthy contact.
Here is an example of
conductive gel recommended
by the biggest electrodes
manufacturers, to be used on
multifunctional electrodes.
The gel should be placed on the electrodes
located at the back of the WearLink transmitter.
Put a "dab" of gel on the top electrode...
... And on the bottom electrode (under the
transmitter pocket).
You can now saddle up, your WearLink belt and
transmitter are now ready for use!


Product specificaties

Merk: Polar
Categorie: Niet gecategoriseerd
Model: Equine Wearlink

Heb je hulp nodig?

Als je hulp nodig hebt met Polar Equine Wearlink stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Polar

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd