Planet POE-E202 Handleiding

Planet Wifi-repeater POE-E202

Lees hieronder de 📖 handleiding in het Nederlandse voor Planet POE-E202 (4 pagina's) in de categorie Wifi-repeater. Deze handleiding was nuttig voor 39 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

- 1 -

- 2 -

- 3 -

- 4 -

- 5 -

- 6 -

- 7 -

- 8 -

1. Package Contents

Thank you for purchasing PLANET 1-port IEEE 802.3at PoE+ to

2-port IEEE 802.3af/at Gigabit PoE Extender, POE-E202. “Gigabit

PoE Extender” mentioned in this manual refers to the POE-E202.

Open the box of the Gigabit PoE Extender and carefully unpack it.

The box should contain the following items:

Gigabit PoE Extender x 1 User’s Manual x 1

If any of these are missing or damaged, please contact your dealer

immediately; if possible, retain the carton including the original

packing material, and use them again to repack the product in case

there is a need to return it to us for repair.

2. Product Features

 Physical Port

3-port 10/100/1000BASE-T Gigabit RJ45 interface

- 1-port data + power input

- 2-port data + power output

Made of metal, desktop size design

Wall-mountable, Plug-and-Play installation

0 ~ 50 degrees C operating Temperature

Note

PSE (Power Sourcing Equipment) is a device

(switch or hub for instance) that will provide power in

a PoE setup. The maximum allowed continuous output

power per such device in IEEE 802.3af is 15.4 watts

and in IEEE 802.3at is 30 watts.

PD (Powered Device) such as IP phones, network

cameras or wireless access points is a PoE-enabled

terminal by PSE and thus it consumes energy.

3.ProductSpecications

Model POE-E202

Interfaces

PoE IN

1 x 10/100/1000BASE-T Ethernet with IEEE

802.3at PoE in auto MDI/MDI-X, “Data + DC”

auto-negotiation RJ45 connector

PoE OUT

2 x 10/100/1000BASE-T Ethernet with IEEE

802.3at/802.3af PoE out“Data + DC”

auto MDI/MDI-X, auto-negotiation RJ45

connector

Figure 1: POE-E202

LED Indicators

PoE IN Port:

PoE-in-Use x 1 (orange), LNK/ACT x 1 (green)

PoE Out Port 1:

PoE-in-Use x 1 (orange), LNK/ACT x 1 (green)

PoE Out Port 2:

PoE-in-Use x 1 (orange), LNK/ACT x 1 (green)

Protection ESD (Ethernet): 2KV (TBD)

Surge (EFT for power) : 2KV (TBD)

Enclosure Metal

Installation Wall mountable

Dimensions

(W x D x H) 140 x 77 x 28 mm

Weight 234g

Power

Requirements

IEEE 802.3at compliant with voltage within

52V-56V DC

Power Consumption

1.6 watts/5.5BTU (System on with PoE input)

2.2 watts/7.5BTU (Ethernet full loading

without PoE function)

36 watts/122.8BTU (Full loading with PoE

function)

Network Cable

10BASE-T: 4-pair UTP Cat. 5 up to 100m

(328ft)

100BASE-TX: 4-pair UTP Cat. 5 up to 100m

(328ft)

1000BASE-T: 4-pair UTP Cat. 5e, 6, up to

100m (328ft)

EIA/TIA-568 100-ohm STP (100m, 328ft)

 Power over Ethernet

1-port data + power input

- Complies with IEEE 802.3at Power over Ethernet Plus

end-span/mid-span PD

- Supports PoE input power up to 30.8 watts

2-port data + power output

- Complies with IEEE 802.3af/IEEE 802.3at Power over

Ethernet/end-span PSE

- Up to 2 IEEE 802.3af/802.3at devices powered

- Supports PoE power up to 25 watts for each PoE port

- Auto detects powered device (PD)

Extends the range of PoE to an additional 100 meters (328ft.)

Forwards both Ethernet data and PoE power to remote device

 Layer 2 Features

Hardware based 10/100/1000Mbps auto-negotiation and auto

MDI/MDI-X

Integrates address look-up engine, supporting 2K absolute MAC

addresses

10K Jumbo packet support

IEEE 802.1Q VLAN transparency

Features Store-and-Forward mode with wire-speed ltering and

forwarding rates

IEEE 802.3x ow control for full duplex operation and back-

pressure for half duplex operation

Automatic address learning and address aging

Supports CSMA/CD protocol

 Case and Installation

No external power cable installation required

Standard Conformance

Regulatory

Compliance FCC Part 15 Class A, CE

Standard

Compliance

IEEE 802.3 10BASE-T Ethernet

IEEE 802.3u 100BASE-TX Fast Ethernet

IEEE 802.3ab 1000BASE-T Gigabit Ethernet

IEEE 802.3af Power over Ethernet

IEEE 802.3at Power over Ethernet Plus

IEEE 802.3x Flow Control

Environment

Operating Temperature: 0 ~ 50 degrees C

Relative Humidity: 5 ~ 95% (non-condensing)

Storage Temperature: -10 ~ 70 degrees C

Relative Humidity: 5 ~ 95% (non-condensing)

Note

Distance will often be shorter due to power delivery

voltage-drop on the wire. The maximum distances will

vary on the quality of the UTP cable and environment.

4. Hardware Introduction

The front panel of the Gigabit PoE Extender consists of one auto-

sensing 10/100/1000BASE-T 802.3at PoE IN port, and two auto-

sensing 10/100/1000BASE-T 802.3af/802.3at PoE Out ports. The

LED Indicators are also located on the port of Gigabit PoE Extender

front panel.

4.2 Ports Connection

PoE IN Port

Connect the port from the following PoE IN

802.3at PSE devices through a Cat 5/5e/6 UTP

cable:

 PoE injector

 PoE injector hub

 PoE Ethernet switch

PoE OUT Port

Connect the port to the following PoE OUT

802.3at/af PD devices through a Cat 5/5e/6 UTP

cable:

 PoE IP camera

 PoE VoIP phone

 PoE wireless AP

 PoE splitter

4.3 LED Indicators

802.3at PoE IN Port

LED Color Function

PoE-in-Use Orange Lights to indicate the port is receiving

52V-56V DC in-line power input.

10/100/1000

LNK/ACT Green

Lights to indicate the link through

that port is successfully established at

10/100/1000Mbps.

Blinks to indicate that the port is actively

sending or receiving data.

Power over Ethernet

PoE Standard

PoE In Port

IEEE 802.3at Power over Ethernet Plus end-

span/mid-span PD class 4 PD

Per PoE Out Port

IEEE 802.3at Power over Ethernet Plus end-

span PSE

IEEE 802.3af Power over Ethernet end-span

PSE

PoE Power Supply

Type End-span (Type A)

PoE Power

PoE In Port

52~56V DC, max. 30.8 watts

Per PoE Out Port

44~55V DC, max. 25 watts

Power Pin

Assignment

PoE In Port

1/2 (+), 3/6 (-); 4/5 (+), 7/8 (-)

Per PoE Out Port

1/2 (+), 3/6 (-)

Hardware Specications

Data Rate 10/100/1000Mbps

MAC Address Table 2K

Data Buffer 2Mbits

Switch Architecture Store-and-Forward

Switch Fabric 6Gbps

Switch Throughput 4.46Mpps @ 64 bytes

Jumbo Frame 10KB

Flow Control IEEE 802.3x pause frame for full duplex

Back pressure for half duplex

- 9 -

- 10 -

- 11 -

- 12 - - 13 - - 14 -

802.3at/af PoE Out Ports

LED Color Function

PoE-in-Use Orange Lights to indicate the port is providing

52V-56V DC in-line power output.

10/100/1000

LNK/ACT Green

Lights to indicate the link through

that port is successfully established at

10/100/1000Mbps.

Blinks to indicate that the port is actively

sending or receiving data.

5. Hardware Installation

5.1 Before Installation

The POE-E202 is installed between the PSE (Power Source

Equipment) and the PD (Powered Device); it is powered by PSE and

forwards the Ethernet data and remaining POE power to the PD.

The POE-E202 doesn’t require an external power supply and it can

be installed easily by just plug and play without affecting the data

transmission performance.

Note

1. To provide you with better PoE power and data

extension quality, we strongly recommend that

you use when installing the “Solid UTP Cable”

POE-E202.

2. The POE-E202 can be installed with a third-party

device if the device complies with IEEE 802.3at/af

standard.

Note

1. When the PoE-in-use LED turns steady orange, it

means the Gigabit PoE Extender is being powered

successfully with PoE.

2. If the PoE-in-use LED is not lit, please check the

remote PSE or the cable connecting to a PC or a

network device to see if the cable is correct. Or

with an 802.3at device such as the target PD,

check whether the power injection is correct.

Never connect any POE PSE to the non-standard

Gigabit PoE Extender; it will damage the device

permanently.

5.3 Connecting POE-E202 to Powered Device (PD)

Step 1: Connect the additional Cat5e/6 cable that will be used

to connect to the remote to the Powered Device (PD)

“PoE Out” port of the Gigabit PoE Extender.

PoE Wireless AP

UTP

PoE Camera

PSE 802.3at PoE Switch

UTP

PoEPoE

PoE

5.2 Connecting POE-E202 to Power Source

Equipment (PSE)

This section describes how to install Gigabit PoE Extender and make

connection to it. Please read the following topics and perform the

procedures in the order being presented.

There are 3 RJ45 ports in the Gigabit PoE Extender, of which the

“PoE IN” “PoE (Data and Power) input” port functions as and

the two ports function as “PoE Out” “PoE (Data and Power)

output”.

Step 1: Connect a standard Cat5e/6 UTP cable from power

source equipment (PSE), such as PoE switch, PoE

injector hub and single port PoE injector, to the “PoE IN”

port of the Gigabit PoE Extender.

PSE 802.3at PoE Switch

UTP

PoE

Step 2: The PSE delivers both Ethernet Data and PoE power

over UTP cable to the Gigabit PoE Extender and the

“PoE-in-use” and “LNK/ACT LED” will be lit steadily.

Step 2: The “PoE Out” port is also the power injector which

transmits DC voltage to the Cat5e/6 cable and transfer

data and power simultaneously between the PSE and PD.

Step 3: Once the Gigabit PoE Extender detects the existence of an

IEEE 802.3at/af device, the LED indicator “PoE-in-Use”

will be lit steadily, showing it is providing power.

Note

1. If the connected device is not fully complying with

IEEE 802.3af/at standard or in-line power device,

the PoE-in-Use LED indicator of the Gigabit PoE

Extender will not be lit steadily.

2. According to IEEE 802.3af/at standard, the Gigabit

PoE Extender will not inject power to the cable

if not connected to a standard IEEE 802.3af/at

device.

5.4 PoE Power Distribution

The POE-E202 can obtain a maximum of 36-watt PoE power from

802.3at PoE input port and supplies a maximum of 30-watt PoE

power budget to 2 PoE output ports, extending both the reach of

Gigabit Ethernet Data IEEE 802.3at/802.3af Power over and

Ethernet over the standard 100m (328 ft.) Cat 5/5e/6 UTP cable to

up to 200m at the same time.

PoE PTZ IP Camera

PoE+(30W)

IEEE 802.3at(25W)

25W

100m

PoE Injector/Switch

802.3at PoE Extender

100m

1 In 1 Out

PoE Dome IP Camera

PoE+(30W)

IEEE 802.3af(12W)100m

100m

IEEE 802.3af(12W)

100m

12W+12W

802.3at PoE Extender PoE Injector/Switch

1 In 2 Out

6. Power over Ethernet Capability

With different distance and different PoE input source, it will inect

the PoE output capability. Please refer to the table below.

PSE 802.3at PoE Switch

POE-E202

PoE Output Capacity

(A)(B)(C)

(A): Distance

(B): Distance

(C): Watts

6.1 When PSE/PoE Switch output is DC 52V

A (Distance) B (Distance) C (Watts)

100M 20M 21.6

100M 60M 20.7

100M 100M 19.7

6.2 When PSE/PoE Switch output is DC 56V

A (Distance) B (Distance) C (Watts)

100M 20M 21.1

100M 60M 20.2

100M 100M 19.3

7. Customer Support

Thank you for purchasing PLANET products. You can browse our

online FAQ resource at PLANET web site rst to check if it could

solve your issue. If you need more support information, please

contact PLANET switch support team.

PLANET online FAQ:

http://www.planet.com.tw/en/support/faq.php?type=1

Switch support team mail address:

support_switch@planet.com.tw

Contents are subject to revision without prior notice.

PLANET is a registered trademark of PLANET Technology Corp. All other

trademarks belong to their respective owners

Product specificaties

Merk:	Planet
Categorie:	Wifi-repeater
Model:	POE-E202
Kleur van het product:	Zwart
Gewicht:	234 g
Breedte:	140 mm
Diepte:	77 mm
Hoogte:	28 mm
Soort:	Netwerkzender & -ontvanger
Materiaal behuizing:	Metaal
LED-indicatoren:	Ja
Montagewijze:	Bureau/muur
Aantal Ethernet LAN (RJ-45)-poorten:	3
Vermogensverbruik (max):	30.8 W
Certificering:	FCC Part 15 Class A, CE
Plug and play:	Ja
Ethernet LAN, data-overdrachtsnelheden:	10,100,1000 Mbit/s
Bekabelingstechnologie:	10/100/1000Base-T(X)
Netwerkstandaard:	IEEE 802.3ab,IEEE 802.3af,IEEE 802.3at,IEEE 802.3x
Temperatuur bij opslag:	-10 - 70 °C
Luchtvochtigheid bij opslag:	5 - 95 procent
Power over Ethernet (PoE):	Ja
MAC-adrestabel:	2000 entries
Jumbo Frames ondersteuning:	Ja
Maximaal bereik:	100 m
Overdrachtssnelheid:	2 Mbit/s
Auto MDIX IEEE:	Ja
Wifi:	Nee
Bedrijfstemperatuur (T-T):	0 - 50 °C
Relatieve vochtigheid in bedrijf (V-V):	5 - 95 procent
Code geharmoniseerd systeem (HS):	85176990
Hoeveelheid Power over Ethernet (PoE) ports:	3
Ondersteundende kabel types:	Cat5,Cat5e
Duplex systeem:	Full,Half
Voltagebereik Power over Ethernet (PoE):	52 - 56 V
VLAN-tagging:	Ja
Aantal RJ-45-poorten (ontvanger):	1
Aantal RJ-45-poorten (zender):	2