Planet POE-E201 Handleiding
Planet
Wifi-repeater
POE-E201
Lees hieronder de 📖 handleiding in het Nederlandse voor Planet POE-E201 (10 pagina's) in de categorie Wifi-repeater. Deze handleiding was nuttig voor 29 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/10
- 1 -
- 2 -
- 3 -
- 4 -
- 5 -
- 6 -
- 7 -
- 8 -
1.2 Key Features
IEEE 802.3at / 802.3af Power over Ethernet compliant
Complies with IEEE 802.3 / 802.3u / 802.3ab
10/100/1000Base-T
Extends the range of PoE an additional 100 meters
(328ft.)
Auto-detect and protect of PoE equipment from being
damaged by incorrect installation
Multiple units, daisy-chain installation support
Forwards both Ethernet data and PoE power to
remote device
No external power cable installation required
Compact size, Wall-mountable design
Plug-and-Play installation
1. Introduction
1.1 Package Contents
Thank you for purchasing PLANET POE-E201 IEEE
802.3at Power over Gigabit Ethernet Extender, your
Power over Gigabit Ethernet Extender package shall
contains following contents:
Check the contents of your package for following parts:
IEEE 802.3at Power over Gigabit Ethernet Extender x 1
User's Manual x 1
If any of these pieces are missing or damaged, please
contact your dealer immediately, if possible, retain the
carton including the original packing material, and use
them against to repack the product in case there is a
need to return it to us for repair.
1.3 TechnicalSpecication
Model POE-E201
Interfaces
LAN IN
1 x 10/100/1000Base-T Ethernet with
IEEE 802.3at / 802.3af PoE “Data
+
DC”
in Auto MDI/MDI-X, Auto-negotiation
RJ-45 connector
LAN OUT
1 x 10/100/1000Base-T Ethernet with
IEEE 802.3at / 802.3af PoE “Data
+
DC”
out Auto MDI/MDI-X, Auto-negotiation
RJ-45 connector
Power over Ethernet
PoE Standard IEEE 802.3af Power over Ethernet
IEEE 802.3at High Power over Ethernet
PoE Power Supply
Type Mid-Span / Type B
PoE Power Output 52V DC, 510mA, Max. 26 Watts
Power Pin
Assignment 4/5(+), 7/8(-)
Maximum
Distance
4 units, daisy-chain installation with
500m support
2.2 Ports Connection
IN Port
Connect the PoE IN port from following
802.3at / 802.3af PSE device through a
CAT-5/5e/6 UTP cable:
• PoE Injector
• PoE Injector Hub
• PoE Ethernet Switch
• Previous POE-E201
OUT
Port
Connect the PoE OUT port to following
802.3at / 802.3af device through aPD
CAT-5/5e/6 UTP cable:
• PoE IP Camera • PoE VoIP Phone
• PoE Wireless AP
• PoE Splitter
• Next POE-E201
2.3 LEDDenition:
LED Color Function
PoE IN Green
Lights to indicate the port is
providing 52-56V (802.3at) / 48V
(802.3af) DC in-line power.
LNK/
ACT Green
Lights to indicate the port is link
up.
Blink: indicate that the extender is
actively sending or receiving data
over port.IN
PoE
OUT Green
Lights to indicate the port is
providing 52-56V (802.3at) / 48V
(802.3af) DC in-line power.
Network Cable
10Base-T: 4-Pair UTP Cat. 5 up to 100m
(328ft)
100Base-TX: 4-Pair UTP Cat. 5 up to
100m (328ft)
1000Base-T: 4-Pair UTP Cat. 5e, 6, up to
100m (328ft)
EIA/TIA-568 100-ohm STP (100m, 328ft)
Standards Conformance
Regulation
Compliance FCC Part 15 Class A, CE
Standard
Compliance
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3ab 1000Base-T Gigabit
Ethernet
IEEE 802.3af Power over Ethernet
IEEE 802.3at High Power over Ethernet
IEEE 802.3x Flow Control
Environment
Operating
Temperature: -10 ~ 60 Degree C
Relative Humidity: 5 ~ 95%
(non-condensing)
Storage
Temperature: -40 ~ 85 Degree C
Relative Humidity: 5 ~ 95%
(non-condensing)
Note
Distance will often be shorter due to power
delivery voltage-drop on the wire. The maximum
distances will vary on the quality of the UTP cable
and environment.
Hardware Specication
Data Rate 10/100/1000Mbps
Switch
Architecture Store-and-Forward
Switch
Throughput
10Mbps: 14880pps@64Bytes
100Mbps: 148810pps@64Bytes
1000Mbps: 1488000pps@64Bytes
Maximum Frame
Size 1552Bytes
Flow Control Back pressure for Half-Duplex
IEEE 802.3x Pause Frame for Full-Duplex
LED Indicators
• 1 x PoE IN (Green)
• 1 x LAN Data (Green)
• 1 x PoE OUT (Green)
Protection ESD (Ethernet): 2KV (TBD)
Surge (EFT for power): 2KV (TBD)
Dimension
(W x D x H) 94 x 70 x 26 mm
Weight 197g
Power
Requirement
IEEE 802.3at compliant with voltage
within 52V-56V DC
Power
Consumption 3.2 Watts (system maximum)
Mechanical Metal / Wall Mountable
2. Hardware Description
2.1 Product Outlook
26.50 22.50
3. Hardware Installation
This product provides three different running speeds –
10Mbps, 100Mbps and 1000Mbps in the same device
and automatically distinguishes the speed of incoming
connection.
This section describes the hardware features of
POE-E201. Before connecting any network device to the
POE-E201, read this chapter carefully.
3.1 Before Installation
Before your installation, it is recommended to check
your network environment. If there is any far away
IEEE 802.3at / 802.3af devices need to power on, the
POE-E201 can provide you a way to supply power for
this Ethernet device conveniently and easily.
The POE-E201 is installed between the PSE (Power
Source Equipment) and the PD (Powered Device); it is
powered by PSE and forwards the Ethernet data and
remaining PoE power to the PD. The POE-E201 doesn’t
require an external power supply and it can be installed
easily just plug and play; that means the operator does
not need to congure the POE-E201. The POE-E201
injects power to the PDs without affecting the data
transmission performance. It offers a cost effective and
quick solution to extend power and data an additional
100m.
- 9 -
- 10 -
- 11 -
- 12 - - 13 - - 14 -
Note
1. To provide you better PoE power and data
extension quality, we strongly recommend that
you use “Solid UTP Cable” when installing
POE-E201.
2. The POE-E201 can be installed with third-party
device if the device complied with IEEE 802.3at
/ 802.3af standard.
3.2 Connect POE-E201 to the Power Source
Equipment (PSE)
There are 2 RJ-45 ports in the PoE Extender, of which
the port functions as “IN” "PoE (Data and Power)
input" “OUT” and the port on the other side functions
as "PoE (Data and Power) output".
Step 1: Connect a standard Cat.5/5e/6 UTP cable from
Power Source Equipment (PSE), such as
PoE Switch, PoE Injector hub and single port
PoE injector, to the “IN” port of POE-E201.
Step 2: The PSE delivers both Ethernet Data and PoE
power over UTP cable to the POE-E201 and the
“PoE IN” LED will be steady on.
Note
1. The POE IN LED turn on steady green means
POE-E201 is being powered successfully with
PoE class 0.
2. If POE IN LED does not turn on, please check
the remote PSE or the cable with a PC or a
network device to see if the cable is correct. Or
with an IEEE 802.3at / 802.3af device such as
the target PD to check the power injection is
correct either.
3.4 Multiple PoE Extender Installation
The POE-E201 PoE Extender supports multiple units,
daisy-chain installation. They can be employed in
series for even longer distances based on remote
PoE IP Camera or PoE Wireless Access Point power
requirement.
Step 1: Connect the additional Cat.5/5e/6 cable from
the “OUT” port of the rst POE-E201, the
other end of the UTP cable be used to connect
to the port of remote / next POE-E201.“IN”
Step 2: “PoE OUT” The LED indicator of the rst
POE-E201 will be steady to shows it is
providing power to next PoE Extender.
Step 3: “PoE IN” The LED on the next POE-E201 will
steady on.
3.3 Connect POE-E201 to the Powered
Device (PD)
Step 3: Connect the additional Cat.5/5e/6 cable
that will be used to connect to the remote
Powered Device (PD) “OUT” to the port of
POE-E201.
Step 4: "OUT" The port is also the power injectors
which transmit DC Voltage to the Cat.5/5e/6
cable and transfer data and power
simultaneously between the PSE and PD.
Step 5: Once POE-E201 detects the existence of an
IEEE 802.3at / 802.3af device, the “PoE OUT”
LED indicator will be steady, ON to shows it is
providing power.
PoE IP Camera
POE-E201
802.3at
PoE Extender
802.3at
PoE Injector
PoE P oE
AC
100M100M
200M
DC
Power Line (AC)
AC
DC Power Line (DC)
1000Base-T UTP
PoE
1000Base-T UTP with PoE
Note
1. If the connected device is not fully complying
with IEEE 802.3at / 802.3af standard or in-line
power device, the PoE OUT LED indicator of
POE-E201 will not be steady on.
2. According to IEEE 802.3at / 802.3af standard,
the POE-E201 will not inject power to the cable
if not connecting to a standard IEEE 802.3at /
802.3af device.
Step 4: Connect the additional Cat.5/5e/6 cable to the
remote PoE powered device to the “OUT” port
of next or third POE-E201.
POE-E201
802.3at PoE Ethernet
Switch/Injector Hub
UPS
PoE
100M
PoE
100M
Outdoor IR
IP Camera
non-PoE IP Camera
802.3at
PoE Splitter
PoE
PoE
PoE
100M
100M
100M
PoE
PoE
PoE
100M
100M
100M
DC
Power Output
300m 200m 100m 0m Distance
AC
AC
400m500m
POE-E201
802.3at
PoE Extender
802.3at
PoE Extender
802.3at
PoE Extender
802.3at
PoE Extender
802.3at
PoE Extender
802.3at
PoE Extender
POE-E201
802.3at
PoE Extender
POE-E201
PoE
100M
POE-E201
PoE
100M
POE-E201
PoE IP Camera
POE-E201
Power Line (AC)
AC
DC Power Line (DC)
1000Base-T UTP
PoE
1000Base-T UTP with PoE
Note
1. Per POE-E201 will take 3.2 Watts maximum for
the system itself, please check the total power
consumption of your IEEE 802.3at / 802.3af
PD and the POE-E201 before you make the
daisy-chain connection. If the overall power
consumption is overloaded, the local PSE could
shutdown the whole power system.
2. Per POE-E201 cable segment is limited in 100
meters Cat.5/5e/6 UTP wire from its IN/OUT
port to the other data end, use of any other
non standard cable or over distance could re-
sults in unstable connection.
3.5 Optional - DIN-Rail Mounting
There are two DIN-Rail holes on the left side of the
POE-E201 that allows the Extender can be easily
installed with DIN-Rail mounting. The PLANET optional
DIN-Rail mounting Kit – RKE-DIN can be order
separately. When need to replace the wall mount
application with DIN-Rail application on the POE-E201,
please refer to following gures to screw the DIN-Rail on
the Extender. To hang the POE-E201, follow the below
steps:
Step 1: screw the DIN-Rail on the POE-E201.
Step 2: Lightly press the button of DIN-Rail into the
track.
1
2
Step 3: Check the DIN-Rail is tightly on the track
You must use the screws supplied with the
mounting brackets. Damage caused to the parts
by using incorrect screws would invalidate your
warranty.
Product specificaties
Merk: | Planet |
Categorie: | Wifi-repeater |
Model: | POE-E201 |
Kleur van het product: | Blauw |
Gewicht: | 197 g |
Breedte: | 94 mm |
Diepte: | 70 mm |
Hoogte: | 26 mm |
Soort: | Netwerkzender & -ontvanger |
Materiaal behuizing: | Metaal |
LED-indicatoren: | LAN, PoE |
Montagewijze: | Muur |
Aantal Ethernet LAN (RJ-45)-poorten: | 2 |
Certificering: | FCC Part 15 Class A, CE |
Plug and play: | Ja |
Bekabelingstechnologie: | 10/100/1000Base-T(X) |
Netwerkstandaard: | IEEE 802.3, IEEE 802.3ab, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x |
Temperatuur bij opslag: | -10 - 85 °C |
Luchtvochtigheid bij opslag: | 5 - 95 procent |
Power over Ethernet (PoE): | Ja |
Maximaal bereik: | 100 m |
Overdrachtssnelheid: | 1000 Mbit/s |
Auto MDIX IEEE: | Ja |
Stroomverbruik (typisch): | 3.2 W |
Bedrijfstemperatuur (T-T): | 0 - 50 °C |
Relatieve vochtigheid in bedrijf (V-V): | 0 - 95 procent |
Ondersteundende kabel types: | Cat5, Cat5e, Cat6 |
Duplex systeem: | Volledig |
Heb je hulp nodig?
Als je hulp nodig hebt met Planet POE-E201 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Wifi-repeater Planet
6 Mei 2023
26 April 2023
16 April 2023
4 April 2023
2 April 2023
26 Februari 2023
25 Februari 2023
28 Januari 2023
16 Januari 2023
11 Januari 2023
Handleiding Wifi-repeater
- Wifi-repeater Xiaomi
- Wifi-repeater Huawei
- Wifi-repeater Asus
- Wifi-repeater Medion
- Wifi-repeater Abus
- Wifi-repeater Allnet
- Wifi-repeater Arris
- Wifi-repeater Audio Pro
- Wifi-repeater Aukey
- Wifi-repeater AVM
- Wifi-repeater Axis
- Wifi-repeater Belkin
- Wifi-repeater Buffalo
- Wifi-repeater D-Link
- Wifi-repeater Davis
- Wifi-repeater Devolo
- Wifi-repeater Digi
- Wifi-repeater Digitus
- Wifi-repeater DJI
- Wifi-repeater Edimax
- Wifi-repeater Elektrobock
- Wifi-repeater Eminent
- Wifi-repeater Engenius
- Wifi-repeater Envivo
- Wifi-repeater Fluke
- Wifi-repeater Gembird
- Wifi-repeater Hama
- Wifi-repeater Hikvision
- Wifi-repeater LevelOne
- Wifi-repeater Linksys
- Wifi-repeater Logilink
- Wifi-repeater Manhattan
- Wifi-repeater Marmitek
- Wifi-repeater Maxxter
- Wifi-repeater Mikrotik
- Wifi-repeater Monacor
- Wifi-repeater Nedis
- Wifi-repeater Netgear
- Wifi-repeater Renkforce
- Wifi-repeater Silvercrest
- Wifi-repeater Sitecom
- Wifi-repeater Strong
- Wifi-repeater Tenda
- Wifi-repeater Tiptel
- Wifi-repeater Toa
- Wifi-repeater TP Link
- Wifi-repeater Trendnet
- Wifi-repeater Universal Remote Control
- Wifi-repeater Vodafone
- Wifi-repeater Western Digital
- Wifi-repeater Wolfgang
- Wifi-repeater ZyXEL
- Wifi-repeater Optex
- Wifi-repeater Essentiel B
- Wifi-repeater CSL
- Wifi-repeater NGS
- Wifi-repeater Steren
- Wifi-repeater Ubiquiti Networks
- Wifi-repeater Conrad
- Wifi-repeater DTRONIC
- Wifi-repeater Atlona
- Wifi-repeater Techly
- Wifi-repeater Deltaco
- Wifi-repeater SIIG
- Wifi-repeater DSC
- Wifi-repeater 7inova
- Wifi-repeater Tripp Lite
- Wifi-repeater Cisco
- Wifi-repeater Vision
- Wifi-repeater Gefen
- Wifi-repeater Amped Wireless
- Wifi-repeater Comtrend
- Wifi-repeater Juniper
- Wifi-repeater Intellinet
- Wifi-repeater Energenie
- Wifi-repeater Silex
- Wifi-repeater NetComm
- Wifi-repeater Lindy
- Wifi-repeater IOGEAR
- Wifi-repeater Black Box
- Wifi-repeater Totolink
- Wifi-repeater Dahua Technology
- Wifi-repeater Mercusys
- Wifi-repeater ATen
- Wifi-repeater Hawking Technologies
- Wifi-repeater Nexxt
- Wifi-repeater Extron
- Wifi-repeater Crestron
- Wifi-repeater StarTech.com
- Wifi-repeater Heatit
- Wifi-repeater Moxa
- Wifi-repeater Smart-AVI
- Wifi-repeater Eero
- Wifi-repeater Kramer
- Wifi-repeater Heden
- Wifi-repeater SilverNet
- Wifi-repeater KanexPro
- Wifi-repeater Nitek
- Wifi-repeater Speco Technologies
- Wifi-repeater Verint
- Wifi-repeater SmartAVI
- Wifi-repeater Cudy
- Wifi-repeater Sabrent
- Wifi-repeater HELGI
- Wifi-repeater Tycon Systems
- Wifi-repeater Multi-link
- Wifi-repeater Atto
- Wifi-repeater Barox
- Wifi-repeater Ruckus Wireless
- Wifi-repeater Axing
- Wifi-repeater EXSYS
- Wifi-repeater Gewiss
- Wifi-repeater Seco-Larm
- Wifi-repeater Altronix
- Wifi-repeater ALC
- Wifi-repeater IDIS
Nieuwste handleidingen voor Wifi-repeater
15 November 2024
15 November 2024
10 November 2024
5 November 2024
2 November 2024
27 September 2024
3 September 2024
3 September 2024
22 Augustus 2024
15 Augustus 2024