Planet POE-400 Handleiding

Planet Netwerkkaart/adapter POE-400

Lees hieronder de 📖 handleiding in het Nederlandse voor Planet POE-400 (4 pagina's) in de categorie Netwerkkaart/adapter. Deze handleiding was nuttig voor 44 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

- 1 -

- 2 -

- 3 -

- 4 -

- 5 -

- 6 -

- 7 -

- 8 -

1. Introduction

1.1 Checklist

Thank you for purchasing our POE-400 IEEE 802.3af Power

over Ethernet Injector Hub, your Power over Ethernet

Injector Hub package shall contains following contents:

Check the contents of your package for following

parts:

l Power over Ethernet Injector Hub x 1

l User’s Manual CD x 1

l Power Adapter x 1

l Power Cord x 1

If any of these pieces are missing or damaged, please

contact your dealer immediately, if possible, retain the

carton including the original packing material, and use them

against to repack the product in case there is a need to

return it to us for repair.

1.3 Features

u Complies with IEEE 802.3, IEEE 802.3u, 10/100Base-TX

u Complies with IEEE 802.3af, 48V DC power over unused

twisted-pair wires

u 4-Port IEEE 802.3af in-line mid-span power injector box

u Full power support for per POE port

u Circuit protection prevent power interference between

ports

u LED indicator power input indication

u Desktop palm size

2.2 POE-400 and POE-152S, the IEEE

802.3af Injector / Splitter and Equipment

Installation

For the places hard to nd the power inlet, the POE-400

provide the easiest way to power your Ethernet devices

such as PLANET IEEE 802.3af Power over Ethernet Splitter

(POE-152S) with Internet Camera (ICA-M220) or Wireless

Access Point (WNAP-3000PE) installed in the small ofce.

To control the power system of your networking devices, the

POE-400 can directly co-work with PLANET ICA-HM230 and

POE IP Phone VIP-351PT to build VoIP telephony network in

the ofce. Besides, the POE-400 can be directly deployed to

connect the third party IEEE 802.3af devices like Cisco AP

and POE switches installed 100 meters away.

1.5 Product Outlook

LED Denition:

LED Color Function

Power Green Lights to indicate that the POE-400

has power.

PoE Ready /

In-Use Green Lights to indicate the port is

providing 48VDC in-line power.

1.2 About the Power over Ethernet Injector

Hub

The PLANET POE-400 is a 4-Port IEEE 802.3af Power over

Ethernet injector hub complied with IEEE 802.3, IEEE

802.3u and IEEE 802.3af standards. Equipped with 4

10/100Base-TX Fast Ethernet ports, the POE-400 supports

full 48V DC power for any remote IEEE 802.3af powered

device (PD) like Wireless LAN Access Point, IP Phone, and

LAN Camera. Supporting power supply of 70 Watts, POE-

400 provides sufcient power to the 4 remote devices.

There are 8 RJ-45 STP ports on POE-400. Half of the ports

on right panel function as "Data" and the other half on left

panel function as "Data and Power". Each of the "Data

and Power" port as an injector which inserts DC Voltage

into the CAT 5 cable allowing the cable between the Injector

and Splitter to transfer data and power simultaneously.

1.4 Specication

Model POE-400

Ethernet Connector

8-Port RJ-45 STP with 4-Port

"Data" and 4-Port "Data and

Power"

Ethernet Data Rate 10/100Mbps (vary on Ethernet

device attached)

Input Voltage DC 48V, 1.5A

Number of Device

can be Power 4

Ethernet Cable TIA/EIA-568, Category 5/5e cable

LED Indicator 1 x power, 4 x POE ready / in-use

Operating

Environment 0~50 Degree C, 5%~90%RH

Storage Environment -10~70 Degree C, 5%~90%RH

Dimension

(H x W x D) 26 x 70 x 97mm

Weight 220g

Emission FCC Class B, CE mark

Standard Compliance

IEEE 802.3 Ethernet

IEEE 802.3u Fast Ethernet

IEEE 802.3af Power over Ethernet

2. Hardware Installation

This product provides two different running speeds –

10Mbps, 100Mbps, in the same device and automatically

distinguishes the speed of incoming connection.

This section describes the hardware features of POE-400.

Before connecting any network device to the POE-400, read

this chapter carefully.

2.1. Before Installation

Before your installation, it is recommended to check your

network environment. If there is any IEEE 802.3af devices

need to power on, the POE-400 can provide you a way

to supply power for this Ethernet device conveniently and

easily. The POE-400 equips with an AC-DC adapter with

DC 48V input and injects this DC power into the pin of the

twisted pair cable (pair 4, 5 and pair 7, 8).

If there is very difcult to nd a power socket for AC-DC

Adapter of your non-IEEE 802.3af networked device, the

POE-400 and POE-152S can provide you a way to supply

DC power for this Ethernet device conveniently and easily.

The 10Mbps or 100Mbps speed, duplex mode from Data

port of POE-400 depends on which Ethernet device

attached.

Notebook

PCPCPCPC

Internet Camera

POE-Splitter

Switch

POE-400

POE-AP

VoIP Phone

PoE

DC Power Line (DC)

100Base-TX UTP

PoE

100Base-TX UTP with PoE

Figure 1: Connection architecture over POE-400

Note

1. According to IEEE 802.3af standard, the

POE-400 will not inject power to the cable

if not connecting to IEEE 802.3af devices.

2. Due to the capability of IEEE 802.3af

standard, the POE-400 can directly connect

with any IEEE 802.3af end-nodes.

- 9 -

- 10 -

- 11 -

- 12 - - 13 - - 14 -

3. Troubleshooting

This chapter contains information to help you solve

problems. If the PoE Injector Hub is not functioning

properly, make sure the PoE Injector Hub was set up

according to instructions in this manual.

How to let my non IEEE 802.3af network devices

can work with POE-400?

Solution:

You can use PLANET Power over Ethernet Splitter, such as

PLANET POE-152S to work as a power transformer between

POE-400 and non IEEE 802.3af devices. Two types of POE-

152S are available for different voltage, 5V DC and 12V DC.

The PoE LED is not lit

Solution:

Check the cable connection between POE-400 and IEEE

802.3af device.

Appendix A Networking Connection

Switch's RJ-45 Pin Assignments

10/100Mbps, 10/100Base-TX

RJ-45 Connector pin assignment

Contact

MDI

Media Dependant

Interface

MDI-X

Media Dependant

Interface -Cross

1 Tx + (transmit) Rx + (receive)

2 Tx - (transmit) Rx - (receive)

3 Rx + (receive) Tx + (transmit)

4, 5 IEEE 802.3af DC 48V

6 Rx - (receive) Tx - (transmit)

7, 8 IEEE 802.3af DC 0V

Why I connect my PoE device to POE-400 and it

cannot power on?

Solution:

1. Please check the cable type of the connection from POE-

400 to the other end. The cable should be an 8-wire UTP,

Category 5/5e, EIA568 cable within 100 meters. A cable

with only 4-wire, short loop or over 100 meters, all will

affect the power supply.

2. Please check and assure the device that fully complied

with IEEE 802.3af standard.

The standard RJ-45 receptacle/connector

There are 8 wires on a standard UTP/STP cable and each

wire is color-coded. The following shows the pin allocation

and color of straight cable and crossover cable connection:

Straight Cable

Cross Over Cable

SIDE 1

SIDE 2

SIDE 1

SIDE 2

12345678

SIDE 2

1 = White/Orange

2 = Orange

3 = White/Green

4 = Blue

5 = White/Blue

6 = Green

7 = White/Brown

8 = Brown

1 = White/Orange

2 = Orange

3 = White/Green

4 = Blue

5 = White/Blue

6 = Green

7 = White/Brown

8 = Brown

SIDE 1 SIDE 2

1 = White/Orange

2 = Orange

3 = White/Green

4 = Blue

5 = White/Blue

6 = Green

7 = White/Brown

8 = Brown

1 = White/Green

2 = Green

3 = White/Orange

4 = Blue

5 = White/Blue

6 = Orange

7 = White/Brown

8 = Brown

Figure A-1: Straight-Through and Crossover Cable

Please make sure your connected cables are with same pin

assignment and color as above picture before deploying the

cables into your network.

Energy Saving Note of the Device

This power required device does not support Standby mode

operation.

For energy saving, please remove the power cable to

disconnect the device from the power circuit.

Without removing power cable, the device will still

consuming power from the power source. In the view of

Saving the Energy and reduce the unnecessary power

consuming, it is strongly suggested to remove the power

connection for the device if this device is not intended to be

active.

Product specificaties

Merk:	Planet
Categorie:	Netwerkkaart/adapter
Model:	POE-400
Gewicht:	220 g
LED-indicatoren:	Ja
Stroom:	1.5 A
Certificering:	FCC Class B, CE
Voldoet aan industriestandaarden:	IEEE 802.3, IEEE 802.3u, IEEE 802.3af
Ethernet LAN, data-overdrachtsnelheden:	10, 100 Mbit/s
Temperatuur bij opslag:	-20 - 70 °C
Luchtvochtigheid bij opslag:	5 - 90 procent
Ethernet interface type:	Fast Ethernet
Power over Ethernet (PoE):	Ja
Afmetingen (B x D x H):	70 x 97 x 26 mm
Bedrijfstemperatuur (T-T):	0 - 50 °C
Relatieve vochtigheid in bedrijf (V-V):	5 - 90 procent
Stroom via Ethernet (PoE):	48 V