Planet POE-163 Handleiding

Planet Netwerkkaart/adapter POE-163

Lees hieronder de 📖 handleiding in het Nederlandse voor Planet POE-163 (4 pagina's) in de categorie Netwerkkaart/adapter. Deze handleiding was nuttig voor 49 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

- 1 -

- 2 -

- 3 -

- 4 -

- 5 -

- 6 -

- 7 -

- 8 -

1. Package Content

Thank you for purchasing PLANET IEEE 802.3at High

Power over Ethernet Injector, POE-163 and POE-164.

Model LAN Port Speed PoE Standard PoE Budget

POE-163 10/100/1000Mbps 802.3at/af 30Watts

POE-164 10/100Mbps

Terms of “802.3at PoE Injector” in following

section of this User’s Manual means the POE-163

and POE-164.

Upon open the box of the IEEE 802.3at High Power

over Ethernet Injector and carefully unpack it. The

box should contain the following items:

 The IEEE 802.3at High Power over Ethernet

Injector x 1

 User’s Manual x 1

 AC Power Cord x 1

If any of these are missing or damaged, please

contact your dealer immediately, if possible, retain

the carton including the original packing material,

and use them against to repack the product in case

there is a need to return it to us for repair.

2. Product Features

Interface

2-Port RJ-45 interfaces

1-Port outputData + Power

1-Port Data input

1 AC 100-240V input power socket

Power over Ethernet

High Power over Ethernet Mid-Span PSE

IEEE 802.3at PoE compliant

Backward compatible with IEEE 802.3af PD

device

Support PoE Power up to 30 Watts for PoE port

Auto-detect of PoE IEEE 802.3at/af equipment

and devices from being damaged by incorrect

installation

Remote power feeding up to 100m

Hardware

Plastic case

LED indicators for Power LED and Active LED

(PoE ready / In-use)

Standard Compliance

IEEE 802.3 10Base-T

IEEE 802.3u 100Base-TX

IEEE 802.3ab 1000Base-T (POE-163 only)

IEEE 802.3at High Power over Ethernet

IEEE 802.3af Power over Ethernet

FCC Part 15 Class B, CE

Note

PSE (Power Sourcing Equipment) is

a device (switch, or hub for instance)

that will provide power in a PoE setup.

Maximum allowed continuous output

power per such device in IEEE 802.3af

is 15.4W, 30W in IEEE 802.3at.

PD (Powered Device) is a PoE-enabled

terminal by PSE and thus consumes

energy, such as IP Phones, network

cameras and Wireless access points, etc

3. Product Specication

Product POE-163 POE-164

Hardware Specication

Interface

“Data” Input

Port 1 x RJ-45 STP

“PoE (Data

+ Power)”

Output Port

1 x RJ-45 STP

AC Input

power socket 1

LED Indicator

System: Power x 1 (Green)

PoE Port: Active, PoE ready / In

Use x 1 (Green)

Network Cable

10Base-T: 2-Pair UTP Cat. 3, 4, 5,

up to 100m (328ft)

100Base-TX: 2-Pair UTP Cat. 3, 4,

5, up to 100m (328ft)

1000Base-T: 2-Pair UTP Cat. 5,

5e, 6 up to 100m (328ft)

(POE-163 only)

EIA/TIA- 568 100-ohm STP (100m)

Data Rate 10/100/1000Mbps 10/100Mbps

Dimension (W x D x H) 115 x 62.5 x 31 mm

Weight 177g

Unit Output Voltage DC 53V, 0.6A

Power Requirement 100-240V AC, 50/60Hz, 0.75A

Power Consumption 30 Watts max.

Number of device can

be powered 1

Operating Temperature 0 ~ 50 Degree C

Storage Temperature -10 ~ 70 Degree C

Operating Humidity 5 ~ 95%, Relative Humidity, non-

condensing

Storage Humidity 5 ~ 95%, Relative Humidity, non-

condensing

Power over Ethernet

PoE Standard IEEE 802.3at High Power over

Ethernet / Mid-Span PSE

PoE Power Output DC 53V / 30 Watts

PoE Power Supply Type Mid-Span

Power Pin Assignment 4/5(+), 7/8(-)

Standards Conformance

Standards Compliance

IEEE 802.3 10Base-T Ethernet

IEEE 802.3u 100Base-TX Fast

Ethernet

IEEE 802.3ab 1000Base-T Gigabit

Ethernet

(POE-163 only)

IEEE 802.3at High Power over

Ethernet

IEEE 802.3af Power over Ethernet

Regulation Compliance FCC Part 15 Class B, CE

4. Product Outlook

Figure 1: shows overviews of 802.3at PoE Injector.

Figure 1: POE-163 / POE-164 Outlook

LED Indicators

LED Color Function

POWER Green Lights to indicate that the 802.3at PoE

Injector has power.

ACTIVE Green

Slow blinks to indicate the port is not

providing 53V DC in-line power.

Lights to indicate the port is providing

53V DC in-line power.

5. Hardware Installation

The following section describes the hardware

features of 802.3at PoE Injector. Before connecting

any network device to the 802.3at PoE Injector, read

this chapter carefully.

This POE-163 provides three different running

speeds – 10Mbps / 100Mbps / 1000Mbps and the

POE-164 provides two different running speeds

– 10Mbps / 100Mbps in the same device for

automatically distinguishes the speed of incoming

connection. Please refer to following sections for

detail information about IEEE 802.3at High Power

over Ethernet Injector.

5-1 Before Installation

Before your installation, it is recommended to check

your network environment. If there is any IEEE

802.3at devices need higher power to power on and

work normally, the 802.3at PoE Injector can provide

you a way to supply power for this Ethernet device

conveniently and easily. The 802.3at PoE Injector

equips with an AC power cord with 100-240V AC

input and injects DC 53V power into the pin of the

twisted pair cable (pair 4, 5 [+] and pair 7, 8 [-] ).

If there is very difcult to nd a power socket for

AC-DC Adapter of your non IEEE 802.3at networked

device, the 802.3at PoE Injector and POE-162S

can provide you a way to supply DC power for this

Ethernet device conveniently and easily.

Note

The 802.3at PoE Injector and POE-162S

can be installed in pair. However, the

use of third-party device is allowed if the

device complied with IEEE 802.3at Power

over Ethernet.

The 802.3at PoE Injector Installation

1. Connect the AC power cord to “AC slot” of

802.3at PoE Injector; the “POWER” LED will be

steady on.

2. Connect a standard network cable from Switch

/ workstation to “LAN” port of 802.3at PoE

Injector.

3. Connect the long cable that will be used to

connect to the remote device to the port “POE”.

4. Connect with IEEE 802.3at / 802.3af devices,

due to the capability of IEEE 802.3at / 802.3af

Power over Ethernet, the 802.3at PoE Injector

can directly connect with any IEEE 802.3at /

802.3af end-nodes such as PTZ (Pan, Tilt &

Zoom) network cameras, PTZ Speed Dome, color

touch- screen Voice over IP (VoIP) telephones,

multi- channel wireless LAN access points where

support IEEE 802.3at / 802.3af In-line Power over

Ethernet port. The screen in Figure 2 appears.

Switch

100 meters

PoE

PoE PTZ

IP Camera

802.3at PoE Injector

1000Base-T UTP

PoE

1000Base-T UTP with PoE

Power Line (AC)

Figure 2: Connection to IEEE 802.3at / 802.3af Devices

- 9 -

- 10 -

- 11 -

- 12 - - 13 -

The ACTIVE LED slow blinks to indicate the port is

not providing 53V DC in-line power, once 802.3at

PoE Injector detects the existence of an IEEE 802.3at

/ 802.3af device, the ACTIVE LED indicator will be

steady on to shows it is providing power.

Note

1. Since the 802.3at PoE Injector PoE

port supports 53V DC PoE power

output, please check and assure the

Powered Device (PD) acceptable DC

power range is 53V DC. Otherwise, it

will damage the Powered Device (PD).

2. If the connected device is not fully

complying with IEEE 802.3at /

802.3af Power over Ethernet or in-

line power device, the LED indicator

of 802.3at PoE Injector will not be

steady on.

The 802.3at PoE Injector and POE-162S, the

IEEE 802.3at Injector Splitter Installation

1. Connect the AC power cord to “AC slot” of

802.3at PoE Injector; the “POWER” LED will be

steady on.

2. Connect a standard network cable from “POE”

port of 802.3at PoE Injector to “PoE In” port of

POE-162S. The “ACTIVE” LED of 802.3at PoE

Injector and POE In-use LED of POE-162S will

light on continuance.

3. Connect a standard network cable from Switch

/ workstation to “LAN” port of 802.3at PoE

Injector.

4. Connect the UTP cable in the package from

“Ethernet” port of POE-162S to the RJ-45 port of

remote device.

5. Adjust proper DC power output and connect DC

plug from “DC OUT” of POE-162S to remote

device.

6. Power on the remote device and its power LED

indicator will remains on.

Switch

Power 12V/24V

POE-162S

100 meters

PoE

AC DC

Non-PoE PTZ

IP Camera

1000Base-T UTP

PoE

1000Base-T UTP with PoE

Power Line (AC)

DC Power Line (DC)

802.3at PoE Injector 802.3at PoE

Splitter

Figure 3: Connection architecture over 802.3at PoE

Injector / POE-162S

Note

1. According to IEEE 802.3at / 802.3af

Power over Ethernet, the 802.3at

PoE Injector will not inject power to

the cable if not connecting to IEEE

802.3at / 802.3af devices.

2. Please ensure the POE-162S output

voltage is correct before applying

power to remote device.

The 802.3at PoE Injector and POE-E201, the

IEEE 802.3at PoE Extender Installation

1. Connect the AC power cord to “AC slot” of

802.3at PoE Injector; the “POWER” LED will be

steady on.

2. Connect a standard network cable from “POE”

port of 802.3at PoE Injector to the “IN” port of

POE-E201.

3. The 802.3at PoE Injector delivers both Ethernet

Data and PoE power over UTP cable to the

POE-E201 and the “ACTIVE” LED of 802.3at PoE

Injector and “PoE IN” LED of POE-E201 will light

on continuance.

4. Connect the additional standard network cable that

will be used to connect to the remote Powered

Device (PD) to the “OUT” port of POE-E201.

5. The “OUT” port is also the power injectors which

transmit DC Voltage to the standard network

cable and transfer data and power simultaneously

between the 802.3at PoE Injector and PD.

6. Once POE-E201 detects the existence of an

IEEE 802.3at / 802.3af device, the “PoE OUT”

LED indicator will be steady, ON to shows it is

providing power.

802.3at

PoE Extender

PoE PoE

100 meters100 meters

200 meters

Power Line (AC)

1000Base-T UTP

PoE

1000Base-T UTP with PoE

PoE IP Camera

802.3at PoE Injector

Figure 4: Connection architecture over 802.3at PoE

Injector / POE-E201

Note

1. If the connected device is not fully

complying with IEEE 802.3at /

802.3af standard or in-line power

device, the PoE OUT LED indicator of

POE-E201 will not be steady on.

2. According to IEEE 802.3at / 802.3af

standard, the POE-E201 will not inject

power to the cable if not connecting

to a standard IEEE 802.3at / 802.3af

device.

Customer Support

Thank you for purchase PLANET products. You can

browse our online FAQ resource at the PLANET

Web site rst to check if it could solve you issue. If

you need more support information, please contact

PLANET switch support team.

PLANET online FAQ :

http://www.planet.com.tw/en/support/faq.php?type=2

Switch support team mail address :

support_switch@planet.com.tw

Contents subject to revision without prior notice.

PLANET is a registered trademark of PLANET Technology Corp.

All other trademarks belong to their respective owners.

EC Declaration of Conformity

For the following equipment:

*Type of Product : Single-Port 10/100/1000Mbps IEEE 802.3at PoE+ Injector (30Watts)

Single-Port 10/100Mbps IEEE 802.3at PoE+ Injector (30Watts)

*Model Number : POE-163, POE-164

* Produced by:

Manufacturer‘s Name : Planet Technology Corp.

Manufacturer‘s Address : 10F., No.96, Minquan Rd., Xindian Dist.,

New Taipei City 231, Taiwan (R.O.C.).

is herewith confirmed to comply with the requirements set out in the Council Directive on the

Approximation of the Laws of the Member States relating to Electromagnetic Compatibility

Directive on (2004/108/EC).

For the evaluation regarding the EMC, the following standards were applied:

EN55022 (2006 + A1:2007 + A2:2010)

EN 61000-3-2 (2006 + A1:2009 + A2:2009)

EN 61000-3-3 (2008)

EN55024 (2010)

IEC 61000-4-2 (2008)

IEC 61000-4-3 (2006+A1: 2007 + A2:2010)

IEC 61000-4-4 (2004 + A1:2010)

IEC 61000-4-5 (2005)

IEC 61000-4-6 (2008)

IEC 61000-4-8 (2009)

IEC 61000-4-11 (2004)

Responsible for marking this declaration if the:

Manufacturer  Authorized representative established within the EU

Authorized representative established within the EU (if applicable):

Company Name: Planet Technology Corp.

Company Address: 10F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)

Person responsible for making this declaration

Name, Surname Kent Kang

Position / Title : Product Manager

Taiwan 29th March, 2013

Place Date Legal Signature

PLANET TECHNOLOGY CORPORATION

e-mail: sales@planet.com.tw http://www.planet.com.tw

10F., No.96, Minquan Rd., Xindian Dist., New Taipei City, Taiwan, R.O.C. Tel:886-2-2219-9518 Fax:886-2-2219-9528

Product specificaties

Merk:	Planet
Categorie:	Netwerkkaart/adapter
Model:	POE-163
Kleur van het product:	Zwart
Gewicht:	177 g
Breedte:	115 mm
Diepte:	62.5 mm
Hoogte:	31 mm
Materiaal behuizing:	Kunststof
LED-indicatoren:	Activity, PoE, Power
AC-adapterfrequentie:	50/60 Hz
AC-adapter ingangsspanning:	100 - 240 V
Stroom:	0.6 A
Aantal Ethernet LAN (RJ-45)-poorten:	2
Vermogensverbruik (max):	30 W
Voldoet aan industriestandaarden:	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3at, IEEE 802.3af
Ethernet LAN, data-overdrachtsnelheden:	10,100,1000 Mbit/s
Netwerkstandaard:	IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u
Temperatuur bij opslag:	-10 - 70 °C
Luchtvochtigheid bij opslag:	5 - 95 procent
Rack-montage:	Nee
Ethernet interface type:	Fast Ethernet, Gigabit Ethernet
Hoogte, in bedrijf:	0 - 100 m
Vermogenstoevoer inclusief:	Ja
Ophangsysteem voor aan de muur:	Ja
Power over Ethernet (PoE):	Ja
10G support:	Nee
Aantal basis-switching RJ-45 Ethernet-poorten:	2
Afmetingen (B x D x H):	115 x 62.5 x 31 mm
Type basis-switching RJ-45 Ethernet-poorten:	Gigabit Ethernet (10/100/1000)
AC-ingangsspanning:	100 - 240 V
AC-ingangsfrequentie:	50/60 Hz
Stroomverbruik (typisch):	30 W
Bedrijfstemperatuur (T-T):	0 - 50 °C
Relatieve vochtigheid in bedrijf (V-V):	5 - 95 procent
Aantal producten inbegrepen:	1 stuk(s)
Code geharmoniseerd systeem (HS):	85176990
Stroom via Ethernet (PoE):	53 V