Planet POE-173 Handleiding

Planet Netwerkkaart/adapter POE-173

Lees hieronder de 📖 handleiding in het Nederlandse voor Planet POE-173 (4 pagina's) in de categorie Netwerkkaart/adapter. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

- 1 -

- 2 -

- 3 -

- 4 -

- 5 -

- 6 -

- 7 -

- 8 -

1. Package Contents

Thank you for purchasing PLANET Single-Port

10/100/1000Mbps Ultra PoE Injector, POE-173.

Model LAN Port Speed PoE Standard PoE

Budget

POE-173 10/100/1000Mbps

Ultra PoE,

backward

compatible with

IEEE 802.3at/af

standard

60 watts

The term in the following “Ultra PoE Injector”

section of this User’s Manual means the POE-173.

The box of the Single-Port 10/100/1000Mbps Ultra

PoE Injector should contain the following items:

The Single-Port 10/100/1000Mbps Ultra PoE

Injector x 1

 User’s Manual x 1

 AC Power Cord x 1

If any of these are missing or damaged, please

contact your dealer immediately; if possible, retain

the carton including the original packing material,

and use them again to repack the product in case

there is a need to return it to us for repair.

2. Product Features

Interface

2 x RJ45 interface

1-Port Data + Power output

 1-Port Data input

 1 x AC 100-240V input power socket

Power over Ethernet

 Ultra Power over Ethernet PSE

 Up to 60 watts of power on 4-pair UTP cable

 Backward compatible with IEEE 802.3at/af PD

device

Auto-detection of PoE IEEE 802.3at/af equip-

ment and devices to check whether there’s any

damage done via incorrect installation

 Remote power feeding up to 100m

Hardware

 All-in-one compact size design

 Internal power supply

 LED indicators for Power LED and Active LED

(PoE ready / In-use)

Note

PSE (Power Sourcing Equipment) is

a device (switch, or hub for instance)

that will provide power in a PoE setup.

The maximum allowed continuous output

power per such device in IEEE 802.3af is

15.4 watts, in IEEE 802.3at is 30 watts

and Ultra PoE is 60 watts.

Note

PD (Powered Device) such as IP

phones, network cameras or wireless

access points is a PoE-enabled terminal

by PSE and thus it consumes energy.

3. Product Specications

Product POE-173

Hardware Specications

Interface

LAN 1 x RJ45 STP, Input Port“Data”

PoE 1 x RJ45 STP, “Data + Power”

Output Port

Connector

1 x AC input power socket,

IEC-320 C6

Network

Cable

Ultra PoE

(60W)

4-pair UTP Cat. 5, 5e, 6 up to

100m (328ft)

802.3af / at

PoE (15W /

30W)

2-pair UTP Cat. 3, 4, 5, up to

100m (328ft)

LED Indicator

System: Power x 1 (Green)

PoE Port: Active, PoE ready /

In Use x 1 (Green)

Data Rate 10/100/1000Mbps

Dimensions

(W x D x H) 115 x 62.5 x 31 mm

Weight 177g

Unit Output Voltage DC 50V, 1.2A

Power Requirements 100-240V AC @50/60Hz,

1.5A max.

Power Consumption 60 watts max.

Operating Temperature 0 ~ 50 degrees C

Storage Temperature -10 ~ 70 degrees C

Operating Humidity 5 ~ 95%, Relative Humidity,

non-condensing

Storage Humidity 5 ~ 95%, Relative Humidity,

non-condensing

Power over Ethernet

PoE Standard

Ultra PoE over 4-pairs UTP cable,

IEEE 802.3at High Power over

Ethernet End-Span / Mid-Span

PSE

PoE Power Supply Type End-Span + Mid-Span

Power Pin Assignment Pair 1 End-Span: 1/2(+), 3/6(-)

Pair 2 Mid-Span: 4/5(+), 7/8(-)

PoE Power Output DC 50V / 60-watt PoE via 4-pairs

DC 50V / 30-watt PoE via 2-pairs

Standards Conformance

Standards Compliance

IEEE 802.3 10BASE-T Ethernet

IEEE 802.3u 100BASE-TX Fast

Ethernet

IEEE 802.3ab 1000BASE-T

Gigabit Ethernet

IEEE 802.3at Power over

Ethernet Plus

IEEE 802.3af Power over Ethernet

Regulation Compliance FCC Part 15 Class B, CE

4. Product Outlook

Figure 1: An overview of Ultra PoE Injector.

Figure 1: POE-173 Outlook

LED Indicators

LED Color Function

POWER Green It indicates that the Ultra PoE Injector

has power.

ACTIVE Green It indicates the port is providing 50V DC

in-line power.

5. Hardware Installation

The following section describes the hardware

features of Ultra PoE Injector. Before connecting any

network device to the Ultra PoE Injector, read this

chapter carefully.

5-1. Before Installation

The POE-173 is backward compatible with IEEE

802.3af PoE and IEEE 802.3at high power PoE

standard. It is equipped with an AC power cord with

100-240V AC input and injects DC 50V power into

the pin of the twisted pair cable (pair 1/2 [+], 3/6

[-] and pair 4/5[+], 7/8[-]) for 60-watt Ultra PoE

injection.

Before connecting the POE-173 to your powered

device (PD), please check to ensure that your

powered device (PD) can accept 60-watt PoE power

through pin 1/2 (+) & 3/6 (-) and pin 4/5 (+) & 7/8

(-). Otherwise, it will damage your powered device

(PD).

Please also note: connect POE-173 POE DO NOT

port to your non-POE network equipment Ethernet

interface. Otherwise, it will damage your network

equipment.

If there is difculty in nding a power socket for

AC-DC Adapter of your non-PoE network device, the

Ultra PoE Injector and POE-171S (Ultra PoE Splitter)

can provide you with DC power for this Ethernet

device conveniently and easily.

Note

The Ultra PoE Injector and POE-171S

can be installed in pair. However,

the use of the third-party device is

allowed if the device complies with

IEEE 802.3at Power over Ethernet Plus

and a maximum of 30 watts of output

capability.

Note

Since the ultra PoE injector PoE port

supports 50V DC PoE power output,

please check and assure the Powered

Device’s (PD) acceptable DC power

range is 50V DC; otherwise, it will

damage the Powered Device (PD).

Ultra PoE Injector Installation

Due to the backward capability of IEEE 802.3at/

af PoE standard, the Ultra PoE Injector can directly

connect with any IEEE 802.3at/af end-nodes such

as PTZ (Pan, Tilt & Zoom) speed dome network

cameras, color touch-screen voice over IP (VoIP)

telephones, and multi-channel wireless LAN access

points. The screen in Figure 2 is shown below.

Switch

100 meters

PoE

PoE PTZ

IP Camera

POE-173

Ultra PoE Injector

1000BASE-T UTP

PoE

1000BASE-T UTP with PoE

Power Line (AC)

Figure 2: Connection to IEEE 802.3at / 802.3af Powered

Devices

1. Connect the AC power cord to of “AC slot”

Ultra PoE Injector; the LED will be on “POWER”

steadily.

2. Connect a standard network cable from Switch /

workstation to port of Ultra PoE Injector.“LAN”

3. Connect the long cable to the port (PoE) of the

remote PoE PD device.

4. Connect with IEEE 802.3at/af devices.

Once Ultra PoE Injector detects the existence of

an IEEE 802.3at / 802.3af device, the ACTIVE LED

indicator will be on steadily to show it is providing

power.

- 9 -

- 10 -

- 11 -

- 12 - - 13 -

Note

If the connected device is not fully

complying with IEEE 802.3at / 802.3af

Power over Ethernet or in-line power

device, the LED indicator of Ultra PoE

Injector will not be on steadily.

The Ultra PoE Injector and Splitter Installation

Below are steps showing how to install the PLANET

Ultra PoE Injector (POE-173) and Ultra PoE Splitter

(POE-171S) in pair.

Switch

Power 12V/19V/24V

POE-171S

100 meters

Power

Data

Power

Data

PoE

PowerData

AC DC

Laptop

1000BASE-T UTP

PoE

1000BASE-T UTP with PoE

Power Line (AC)

DC Power Line (DC)

POE-173 Ultra PoE

Splitter

Ultra PoE Injector

Figure 3: Topology of the Connection of POE-173 and

POE-171S

1. Connect the AC power cord to of “AC slot”

Ultra PoE Injector; the LED will be on “POWER”

steadily.

2. Connect a standard network cable from “POE”

port of Ultra PoE Injector to port of “PoE In”

POE-171S. The LED of Ultra PoE “ACTIVE”

Injector and POE In-use LED of POE-171S will

light up continuously.

3. Connect a standard network cable from Switch /

workstation to port of Ultra PoE Injector.“LAN”

4. Connect the UTP cable in the package from

“Ethernet” port of POE-171S to the RJ45 port of

remote device.

5. Adjust proper DC power output and connect DC

plug from of POE-171S to remote “DC OUT”

device.

6. Power on the remote device and its power LED

indicator will remain on.

Note

Please make sure the POE-171S output

voltage is correct before applying

power to remote device. The POE-171S

provides DC12V/19V/24V power output.

The Ultra PoE Injector and PoE Extender

Installation

Below are steps showing how to install the PLANET

Ultra PoE Injector (POE-173) and 802.3at PoE+

Extender (POE-E201) to extend the distance of

networking.

802.3at

PoE Extender

PoE PoE

100 meters100 meters

200 meters

Power Line (AC)

1000BASE-T UTP

PoE

1000BASE-T UTP with PoE

PoE IP Camera

POE-173

Figure 4: Topology of the Connection of POE-173 and

POE-E201

1. Connect the AC power cord to of “AC slot”

Ultra PoE Injector; the LED will be on “POWER”

steadily.

2. Connect a standard network cable from “POE”

port of Ultra PoE Injector to the port of “IN”

POE-E201.

3. The Ultra PoE Injector delivers both Ethernet Data

and PoE power over UTP cable to the POE-E201

and the LED of Ultra PoE Injector and “ACTIVE”

“PoE IN” LED of POE-E201 will light up continu-

ously.

4. Connect the additional standard network cable

to the remote via the Powered Device (PD)

“OUT” port of POE-E201.

5. The “OUT” port is also the power injectors which

transmits DC voltage to the standard network

cable and transfer data and power simultaneously

between the Ultra PoE Injector and PD.

6. Once POE-E201 detects the existence of an IEEE

802.3at / 802.3af device, the LED “PoE OUT”

indicator will be on steadily to show it is providing

power.

Note

1. If the connected device is not fully

complying with IEEE 802.3at /

802.3af standard or in-line power

device, the PoE OUT LED indicator of

POE-E201 will not be on steadily.

2. According to IEEE 802.3at / 802.3af

standard, the POE-E201 will not inject

power to the cable if not connected

to a standard IEEE 802.3at / 802.3af

device.

Customer Support

Thank you for purchasing PLANET products. You

can browse our online FAQ resource at the PLANET

Web site rst to check if it could solve your issue. If

you need more support information, please contact

PLANET switch support team.

PLANET online FAQ :

http://www.planet.com.tw/en/support/faq.php?type=2

Switch support team mail address :

support_switch@planet.com.tw

Contents are subject to revision without prior notice.

PLANET is a registered trademark of PLANET Technology Corp.

All other trademarks belong to their respective owners.

EC Declaration of Conformity

For the following equipment:

*Type of Product : Single-Port 10/100/1000Mbps Ultra PoE Injector (60 Watts)

*Model Number : POE-173

* Produced by:

Manufacturer‘s Name : Planet Technology Corp.

Manufacturer‘s Address : 10F., No.96, Minquan Rd., Xindian Dist.,

New Taipei City 231, Taiwan (R.O.C.).

is herewith confirmed to comply with the requirements set out in the Council Directive on the

Approximation of the Laws of the Member States relating to Electromagnetic Compatibility

Directive on (2004/108/EC).

For the evaluation regarding the EMC, the following standards were applied:

EN55022 (2006 + A1:2007 + A2:2010)

EN 61000-3-2 (2006 + A1:2009 + A2:2009)

EN 61000-3-3 (2008)

EN55024 (2010)

IEC 61000-4-2 (2008)

IEC 61000-4-3 (2006+A1: 2007 + A2:2010)

IEC 61000-4-4 (2004 + A1:2010)

IEC 61000-4-5 (2005)

IEC 61000-4-6 (2008)

IEC 61000-4-8 (2009)

IEC 61000-4-11 (2004)

Responsible for marking this declaration if the:

Manufacturer  Authorized representative established within the EU

Authorized representative established within the EU (if applicable):

Company Name: Planet Technology Corp.

Company Address: 10F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)

Person responsible for making this declaration

Name, Surname Kent Kang

Position / Title : Product Manager

Taiwan 24 th May, 2013

Place Date Legal Signature

PLANET TECHNOLOGY CORPORATION

e-mail: sales@planet.com.tw http://www.planet.com.tw

10F., No.96, Minquan Rd., Xindian Dist., New Taipei City, Taiwan, R.O.C. Tel:886-2-2219-9518 Fax:886-2-2219-9528

Product specificaties

Merk:	Planet
Categorie:	Netwerkkaart/adapter
Model:	POE-173
Kleur van het product:	Zwart
Gewicht:	227 g
Breedte:	115 mm
Diepte:	62.5 mm
Hoogte:	31 mm
LED-indicatoren:	Activity, PoE, Power
AC-adapterfrequentie:	50 - 60 Hz
AC-adapter ingangsspanning:	100 - 240 V
Stroom:	1.5 A
Aantal Ethernet LAN (RJ-45)-poorten:	2
Vermogensverbruik (max):	60 W
Certificering:	FCC Part 15 Class B, CE
Ethernet LAN, data-overdrachtsnelheden:	10,100,1000 Mbit/s
Netwerkstandaard:	IEEE 802.3, IEEE 802.3ab, IEEE 802.3u
Temperatuur bij opslag:	-10 - 70 °C
Luchtvochtigheid bij opslag:	5 - 95 procent
Rack-montage:	Nee
AC-adapter, uitgangsspanning:	50 V
Output current:	1.2 A
Ethernet interface type:	Fast Ethernet, Gigabit Ethernet
Vermogenstoevoer inclusief:	Ja
Power over Ethernet (PoE):	Ja
Stapelbaar:	Nee
10G support:	Nee
Aantal basis-switching RJ-45 Ethernet-poorten:	2
Type basis-switching RJ-45 Ethernet-poorten:	Gigabit Ethernet (10/100/1000)
Bedrijfstemperatuur (T-T):	0 - 50 °C
Relatieve vochtigheid in bedrijf (V-V):	5 - 95 procent
Code geharmoniseerd systeem (HS):	85176990
Totaal Power over Ethernet (PoE)-budget:	60 W
Ondersteundende kabel types:	Cat5, Cat5e, Cat6
Vermogen per poort Power over Ethernet (PoE):	60 W
Stroom via Ethernet (PoE):	50 V