Planet GT-805A Handleiding

Planet Audio/video-converter GT-805A

Lees hieronder de 📖 handleiding in het Nederlandse voor Planet GT-805A (2 pagina's) in de categorie Audio/video-converter. Deze handleiding was nuttig voor 20 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

– 1 – – 2 –

– 3 – – 4 –

1. Product Features

GT-805A Gigabit Ethernet Media Converter:

zComplies with IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX/

FX, IEEE 802.3ab 1000BASE-T, IEEE 802.3z 1000BASE-SX/LX

standard

zData transfer rate: TP – 10/100/1000Mbps; SFP – 100/1000Mbps

zDIP switch for LFP function (Disable/Enable) setting

z9K jumbo frame supported

zCompliant with PLANET’s 10”/19” media converter chassis

2. Checklist

Your GT-805A carton should contain the following items:

The Gigabit Ethernet Media Converter

AC-DC Power Adapter (Output: 5V DC, 2A max.)

This User’s Manual

If any item is missing or damaged, please consult the dealer from

whom you purchased your Gigabit Ethernet Media Converter.

Note

The GT-805A comes with one vacant SFP module

slot. The mini GBIC SFP module is not bundled in the

package.

3. Product Outlook

Front View

There are one RJ45 twisted-pair jack (auto-MDI/MDI-X), one

100/1000X SFP ber-optic slot and four LED indicators. Also one

DIP switch for Link-Fault Passthrough (LFP) feature and “ON” to

turn on the LLCF and LLR detection. And “OFF” to turn o the

feature. Please refer to the following sections for more.

Gigabit Ethernet Converter

10/100/1000BASE-T to 100/1000BASE-X

100/1000X

PWR 1000

LFP

OFF

TPFiber

LNK /ACT

Figure 1: GT-805A Front View

Rear View

The rear panel of the Gigabit Ethernet Media Converter indicates

one DC jack, which accepts input power with 5V DC 2A.

5V DC

Figure 2: GT-805A Rear View

Power Information

The power jack of Gigabit Ethernet Media Converter measures

2.5mm in the central post and requires +5VDC power input.

It conforms to the bundled AC-DC adapter and Planet’s Media

Chassis. Should you have the issue to make the power connection,

please contact your local sales representative.

The AC-DC adapter is used as a spare part when your Gigabit

Ethernet Media Converter is installed to a Media Chassis.

2.5mm

DC Receptacle 2.5mm

+5V for each slot

DC receptacle is 2.5mm wide that conforms to the Gigabit

Ethernet Media Converter’s 2.5mm DC jack’s central post. Do

not install any improper unit.

4. Link Fault Pass-through (LFP)

The LFP function includes the Link-Fault-Passthrough function

(LLCF/LLR) and the DIP Switch design. LLCF/LLR can immediately

alarm administrators the issue of the link media and provide

ecient solution to monitor the network. The DIP Switch will

disable or enable the LFP function.

LLCF (Link Loss Carry Forward) means when a device is connected

to the converter and the TP line loses the link, the converter’s ber

will disconnect transmission link. LLR (Link Loss Return) means

when a device is connected to the converter and the ber line loses

the link, the converter’s ber will disconnect.

Note

LFP function is ON by default setting. If you are

familiar with the network installation and for

diagnostic purpose (i.e. check which end is broken),

you can turn it off and reset the converter to make

it take effect. Otherwise, please keep it in the default

position.

5. Duplex Mode Support

The GT-805A TP port supports triple speed -- 10/100/1000BASE-T,

auto-negotiation. It will auto detect the link speed and the

duplex mode by default with its link partner. The ber port

(100/1000BASE-FX/SX/LX) allows 100/1000Mbps full duplex by

auto-negotiation. Please also check the setting of the link partner.

6. LED Indication

LED Color Description

PWR Green Lit: To indicate +5V DC power is detected.

Fiber

LNK/ACT Green

Lit: To indicate the link through ber port is

successfully established.

Blinks: To indicate the ber port is actively

sending or receiving data.

– 5 – – 6 –

8.ProductSpecications

Model GT-805A

Fiber Connector SFP, LC type

Fiber Mode May vary on module

Fiber Maximum

Distance May vary on module

Copper Connector 10/100/1000Mbps RJ45

Copper Modes Full duplex, auto-negotiation

Packet Forwarding

Rate (64bytes)

14880pps @10Mbps/148810pps

@100Mbps/1488000pps @ 1000Mbps

DIP switch LFP Disable/Enable

Protocols and

Standards

IEEE 802.3 10BASE-T

IEEE 802.3u 100BASE-TX/100BASE-FX

IEEE 802.3ab 1000BASE-T

IEEE 802.3z 1000BASE-SX/LX

Jumbo Packet Size 9K

Dimensions

(W x D x H) 97 x 70 x 26 mm

Power 5V DC, 2A max.

Emission FCC CE

Temperature Operating: 0 ~ 50°C

Storage: -10 ~ 70°C

Humidity 5% ~ 90% non-condensing

Installation Wall mount, DIN-rail, chassis installation

Note

1. For connection to the Gigabit Ethernet products,

please refer to the device’s technical manual.

2. Consult your dealer for DIN-rail or chassis installation.

LNK/ACT Green

Lit: To indicate the link through TP port is

successfully established.

Blinks: To indicate the port is actively sending

or receiving data.

TP 1000

LNK/ACT Green

Lit: To indicate the port is running at

1000Mbps.

Blinks: To indicate the port is actively sending

or receiving data.

O: To indicate the port is running at

10/100Mbps.

7. Cable Connection Parameter

The wiring details are shown below:

Duplex Connection Limitation (max.)

Twisted Pair

Half/Full Node to Node

Node to Switch/Hub 100 meters

Fiber Optic Cables:

Standard

(Wavelength)

100BASE-FX

(1310nm)

1000BASE-SX

(850nm)

1000BASE-LX

(1310nm)

Fiber Type

& Cable

Specications

Multi-mode 50/125μm or 62.5/125μm

Single-mode 9/125μm

Product specificaties

Merk:	Planet
Categorie:	Audio/video-converter
Model:	GT-805A
Kleur van het product:	Zwart
Gewicht:	200 g
Breedte:	94 mm
Diepte:	70 mm
Hoogte:	26 mm
LED-indicatoren:	Ja
Stroom:	2 A
Connectiviteitstechnologie:	Bedraad
Aantal Ethernet LAN (RJ-45)-poorten:	2
Certificering:	FCC Class A, CE Class A
Ingangsspanning:	5 V
Ethernet LAN, data-overdrachtsnelheden:	10,100,1000 Mbit/s
Netwerkstandaard:	IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Temperatuur bij opslag:	-10 - 70 °C
Intern:	Nee
Golflengte:	0 nm
Luchtvochtigheid bij opslag:	5 - 95 procent
Ethernet interface type:	Gigabit Ethernet
Maximale overdrachtssnelheid van gegevens:	1000 Mbit/s
Auto MDI/MDI-X:	Ja
Maximaal bereik:	100 m
Stroomverbruik (typisch):	5.6 W
Bedrijfstemperatuur (T-T):	0 - 50 °C
Relatieve vochtigheid in bedrijf (V-V):	5 - 95 procent
Code geharmoniseerd systeem (HS):	85176990
DIN rail bevestiging:	Ja
Vezel-optische connector:	SFP
Vezelkabel diameters ondersteund:	9/125, 50/125, 62.5/125 µm
Converter input interface:	10Base-T, 100Base-T, 1000Base-T
Duplex systeem:	Full, Half
Converter output interface:	1000Base-LX, 1000Base-SX
Draad modus structuur:	Multimode