Pioneer VREC-200CH Handleiding

Pioneer Dashcam VREC-200CH

Lees hieronder de 📖 handleiding in het Nederlandse voor Pioneer VREC-200CH (2 pagina's) in de categorie Dashcam. Deze handleiding was nuttig voor 29 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
VREC-200CH Battery Replacement –
1. Using a Phillips screwdriver, remove the screws in the screw holes
2. Use a sharp but low hardness disassembly blade and disassemble the product along the
frame gap shown in the picture above
3. In order to prevent the glass lens and screen from being damaged during the battery
removal process, remove the glass lens and screen first;
2
2
2
22
3
3
3
33
4. Find the location of the battery show in the picture above, use a constant temperature
soldering iron, and remove the battery;
5. The process of removing the battery: first remove the black wire with a constant
temperature soldering iron, then remove the red wire, and finally remove the battery.
6. The above is the entire process of battery removal. The installation steps after battery
replacement are the same as the removal steps, but the order needs to be reversed.
Contact Information
Pioneer Customer Support Center
http://www.pioneer. eu
------------------------------------------------------------
Copyright(c) 20 Pioneer Corporation 21


Product specificaties

Merk: Pioneer
Categorie: Dashcam
Model: VREC-200CH

Heb je hulp nodig?

Als je hulp nodig hebt met Pioneer VREC-200CH stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Dashcam Pioneer

Handleiding Dashcam

Nieuwste handleidingen voor Dashcam