Pioneer PDP-503MXE Handleiding

Pioneer Plasma TV PDP-503MXE

Lees hieronder de 📖 handleiding in het Nederlandse voor Pioneer PDP-503MXE (25 pagina's) in de categorie Plasma TV. Deze handleiding was nuttig voor 50 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/25

PLASMA DISPLAY MONITOR: PDP-503CMX/PDP-503MXE

VIDEO CARD: PDA-5002

TABLE TOP STAND: PDK-TS01

PDP BRACKET: PDK-5005

PLASMA DISPLAY WALL-MOUNT HARDWARE: PDK-5011

PLASMA DISPLAY CEILING SUSPENSION HARDWARE: PDK-5012

PLASMA DISPLAY WALL-MOUNT HARDWARE: PDK-5013

MOBILE CART: PDK-5014

CABLE COVER: PDA-P01

SPEAKER SYSTEM: PDP-S05-LR

ABOUT MOUNTING/INSTALLATION

÷This product is sold under the assumption that

installation will be performed by experienced,

qualified experts. Refer all mounting and

installation work to qualified personnel, or consult

the nearest PIONEER dealer for assistance.

÷We accept no responsibility for accident or loss

resulting from failure to select an appropriate

installation site, or for those occurring during

assembly, installation, mounting, or operation of

this product, or resulting from modifications made

to this product, or from natural disasters.

PRECAUTIONS:

• We accept no responsibility for losses resulting from

the use of parts other than those supplied by us.

• We guarantee the performance of our products only

when they are assembled and adjusted as described in

this manual.

• The specifications and external designs shown in this

manual are subject to change without notice.

CAUTION

Exclamation marks placed within triangles are

intended to alert users to the presence of important

safety information. Be sure to read instructions

indicated by this symbol.

This manual provides precautions and information for installation, preparation, and handling of the plasma display and

its dedicated mounting hardware.

Before installation and preparatory work, choose a safe and appropriate site after thorough consideration of construction,

materials used, strength, and surroundings. If adequate safeguards are not in place, immediately halt the installation

process and discontinue marketing activities.

TECHNICAL MANUAL (Ver. 1.0)

INTRODUCTION ..................................................................... 4

FEATURES .............................................................................. 5

SPECIFICATIONS

2.1 Specifications ................................................................. 6

2.2 External Dimensions ...................................................... 9

2.3 Controls and Connectors ............................................. 11

2.4 Pin layout ..................................................................... 14

2.5 Remote Control Unit .................................................... 15

2.6 Remote Control Unit Holder ........................................ 16

INSTALLATION SITE REQUIREMENTS

3.1 Installation Site Requirements ..................................... 18

3.2 Installation Conditions .................................................. 20

3.2.1 Heat dissipation ................................................. 20

3.2.2 Calculating heat quantity ................................... 21

3.2.3 Product mounting holes .................................... 21

3.2.4 Mounting surface warping ................................. 23

3.3 Installation Procedures ................................................ 24

3.3.1 Transportation precautions ................................ 24

3.3.2 Unpacking .......................................................... 24

3.3.3 Mounting on the attachment stands ................. 26

3.3.4 Re-packing ......................................................... 26

3.3.5 Wiring ................................................................ 27

3.4 Special Installation ....................................................... 30

3.4.1 Mounting to fittings ........................................... 30

3.4.2 Hanging on the wall ........................................... 32

3.4.3 Embedding in the wall ....................................... 34

3.4.4 When the display is put in a box ........................ 38

3.4.5 Ceiling suspension (with wires) ......................... 40

3.4.6 Hanging on the wall (lengthwise) ...................... 42

3.4.7 Place product upright and flush into wall

(embedding in the wall) ..................................... 44

3.4.8 Horizontal connections ...................................... 48

HOW TO USE THE STANDARD MOUNTING COMPONENTS

4.1 Standard Mounting Components Features

and Characteristics ...................................................... 50

4.2 Handling the Standard Mounting Components ........... 51

4.2.1 Handling precautions ......................................... 51

4.2.2 Precautions for installation contractors ............. 51

4.3 Installation of the Attachment Stand ........................... 52

4.4 Video card: PDA-5002 .................................................. 54

4.4.1 Specifications .................................................... 54

4.4.2 External Dimensions .......................................... 55

4.4.3 Installing procedures ......................................... 56

4.5 Tabletop Stand: PDK-TS01 ........................................... 58

4.5.1 Specifications .................................................... 58

4.5.2 Installation coordinates for screws used to

stabilize the stand to the floor ........................... 59

4.5.3 External Dimensions .......................................... 59

4.5.4 Stand assembling .............................................. 60

4.5.5 Stand attaching to the Plasma Display .............. 60

4.6 PDP Bracket: PDK-5005 ............................................... 64

4.6.1 Specifications .................................................... 64

4.6.2 External Dimensions .......................................... 65

4.6.3 Assembly Procedure ......................................... 66

4.6.4 An example of use ............................................. 67

4.7 Tiltable Plasma Display

Wall-Mount Hardware: PDK-5011 ................................ 68

4.7.1 Specifications .................................................... 68

4.7.2 External Dimensions .......................................... 69

4.7.3 Assembling the mounting hardware and

mounting the plasma display ............................. 70

4.7.4 Angle setup ....................................................... 71

4.7.5 Measure to prevent shakiness when the unit is

installed at a slight inclination ............................ 72

Table of Contents

4.8 Plasma Display Ceiling Suspension

Hardware: PDK-5012 ................................................... 74

4.8.1 Specifications .................................................... 74

4.8.2 External Dimensions .......................................... 75

4.8.3 Assembling and Installing the mounting

hardware and mounting the plasma display ...... 76

4.8.4 Assembly procedure .......................................... 77

4.8.5 Angle setup ....................................................... 78

4.9 Tiltable Plasma Display Wall-Mount

Hardware: PDK-5013 ................................................... 80

4.9.1 Specifications .................................................... 80

4.9.2 External Dimensions .......................................... 81

4.9.3 Assembling the mounting hardware and

mounting the display ......................................... 82

4.10 Mobile Cart: PDK-5014 ............................................... 84

4.10.1 Specifications ................................................... 84

4.10.2 External Dimensions ......................................... 85

4.10.3 Disassembling the display stand ...................... 86

4.10.4 How to install .................................................... 86

4.11 Cable Cover: PDA-P01 ............................................... 90

4.11.1 Specifications .................................................... 90

4.11.2 External Dimensions ......................................... 90

4.11.3 Cautions ............................................................ 90

4.11.4 Cable lead-in locations ...................................... 90

4.11.5 How to install .................................................... 91

4.12 Speaker System: PDP-S05-LR ................................... 92

4.12.1 Specifications .................................................... 92

4.12.2 External Dimensions ......................................... 93

4.12.3 Installation on the

PDP-503CMX or PDP-503MXE ......................... 94

BEFORE BEGINNING ADJUSTMENTS

5.1 Before Beginning Adjustments .................................... 96

5.1.1 Operating mode ................................................. 96

5.1.2 Combination use of remote control unit,

operating panel and PC ...................................... 97

5.1.3 Lists of supported input signals ......................... 98

5.1.4 List of adjustable and settable items ............... 102

5.1.5 Last Memory ................................................... 107

5.2 Normal Operating Mode ............................................ 108

5.2.1 About normal operating mode .......................... 108

5.3 Menu Mode ............................................................... 110

5.3.1 About menu mode ........................................... 110

5.3.2 Example of menu mode operation .................. 111

5.3.3 Settings in menu mode ................................... 113

1) Rewriting the input display ........................ 113

2) Setting POWER MANAGEMENT

and AUTO POWER ON/OFF ..................... 114

3) Setting the color temperature ................... 115

4) Reducing digital noise ............................... 116

5) Setting HIGH CONTRAST ......................... 117

6) Setting PURECINEMA .............................. 118

7) Setting the color system ........................... 119

8) Setting the clamp position ........................ 120

9) Setting 3D Y/C separation ......................... 121

10) Settings for peripheral equipment ............. 122

11) Setting the input signal format .................. 123

12) Setting the power control ......................... 124

13) Setting automatic input switching ............. 126

14) Setting audio output .................................. 127

Table of Contents

CAUTION

• To prevent injury and material damage, thoroughly read

this manual and all labels found on the equipment before

attempting to mount, install, move, or adjust the product.

• Do not install the unit outside or in the open air. Doing

so will lead to water seepage into the system, resulting

in fire or electric shock.

• Be especially careful when working around parts of the

system that have sharp edges.

• When performing installation work from a height, take

suitable precautions to guard against falling. Set up a

barrier around the work site to prevent accidentally

dropped objects from injuring persons standing or

walking below.

• Keep all foreign objects out of the unit. Do not tamper

with the unit, or fire or electric shock may result.

• Observe the following operating environmental

limitations:

Temperature: 0 to 40°C

Humidity: 20 to 80%

• Install the unit only in properly ventilated areas.

5.4 Integrator Mode ......................................................... 128

5.4.1 About the integrator mode .............................. 128

5.4.2 Example of integrator mode operation ............ 129

5.4.3 Adjustments and settings in integrator mode ... 131

1) Adjusting PICTURE (picture quality) .......... 131

2) Adjusting WHITE BALANCE ..................... 132

3) Adjusting SCREEN (screen position) ......... 133

4) Setting the 4-screen display (2x2 mode) ... 134

5) Setting brightness enhancement

at screen center ........................................ 135

6) Setting the HDTV MODE .......................... 136

7) Setting component input ........................... 137

8) Adjusting SUB VOLUME ........................... 138

9) Setting the OSD display ............................ 140

10) Setting the baud rate ................................. 141

11) Setting OFF TIMER ................................... 142

12) Setting FULL MASK .................................. 143

13) Adjusting SIDE MASK ............................... 144

14) Setting MASK CONTROL .......................... 145

15) Setting ORBITER MODE ........................... 146

16) Setting INVERSE MODE

(negative-positive inversion) ...................... 147

17) Setting COLOR MODE ............................. 148

18) Setting MIRROR MODE ........................... 149

19) Setting the cooling fan control formula ..... 150

20) Assigning a name to the monitor .............. 151

21) Assigning an ID ......................................... 152

22) Input settings when using a video card

other than the PDA-5002 .......................... 153

23) Simple checking of internal temperature .. 154

24) Checking the accumulated ON time ......... 155

5.4.4 PICTURE and WHITE BALANCE adjustment

values memory area tables .............................. 156

5.4.5 SCREEN adjustment values area tables .......... 158

5.5 RS-232C Adjustment Mode ....................................... 160

5.5.1 About the RS-232C adjustment mode ............. 160

5.5.2 Interface .......................................................... 161

5.5.3 ID assignment ................................................. 163

5.5.4 List of RS-232C commands ............................. 164

5.5.5 GET commands ............................................... 167

5.6 Combination Connection ........................................... 170

5.7 KEY LOCK/UNLOCK .................................................. 172

5.7.1 Functions ......................................................... 172

5.7.2 How to switch KEY LOCK/UNLOCK ................ 172

5.8 Regarding the problem of images becoming

burnt onto the screen ................................................ 173

5.9 Cautions on connecting camera images .................... 174

OPERATING PRECAUTIONS AND RECOMMENDATIONS

6.1 Operating Precautions and recommendations .......... 175

MAINTENANCE AND CLEANING ..................................... 176

Product specificaties

Merk:	Pioneer
Categorie:	Plasma TV
Model:	PDP-503MXE
Gewicht:	38900 g
Breedte:	1218 mm
Diepte:	98 mm
Hoogte:	714 mm
Beeldscherm:	XGA Professional Plasma
Beeldschermdiagonaal:	50 "
Resolutie:	1280 x 768 Pixels
Oorspronkelijke beeldverhouding:	16:9
Kijkhoek, horizontaal:	160 °
Kijkhoek, verticaal:	160 °
Typische contrastverhouding:	750:1
Netvoeding:	380 W
HD type:	WXGA
Display technologie:	Plasma
Pixel pitch:	0.858 x 0.808 mm
Beeldverhouding:	16:9
Diepte ( zonder voet ):	98 mm
Hoogte (zonder voet ):	714 mm
Breedte ( zonder voet ):	1218 mm
Gewicht (zonder voet):	38900 g
Bedrijfstemperatuur (T-T):	0 - 40 °C
Relatieve vochtigheid in bedrijf (V-V):	20 - 80 procent