Pingi Cascada CHD-A4000M Handleiding

Pingi Luchtbevochtiger Cascada CHD-A4000M

Lees hieronder de 📖 handleiding in het Nederlandse voor Pingi Cascada CHD-A4000M (16 pagina's) in de categorie Luchtbevochtiger. Deze handleiding was nuttig voor 9 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/16

CHD-A4000M - ULTRASONIC HUMIDIFIER

OPERATING INSTRUCTIONS

humidiFier

CASCADA™ CHD-A4000M

OPERATING INSTRUCTIONS

ULTRASONIC

SAFETY – GENERAL

• This appliance should be used as described within the instructions for

use that accompany it.

• For indoor, domestic use only.

• This appliance can be used by children aged 8 years and above, and

persons with reduced physical, sensory or mental capabilities or lack

of experience and knowledge, if they have been given supervision or

instruction concerning the use of the appliance in a safe way,

and understand the hazards involved.

• Keep the appliance out of reach of small children. Children should

not play with the appliance or its accessories. Cleaning and user

maintenance operations should not be performed by children unless

they are older than 8 years and under supervision.

• This appliance contains small parts which may cause choking.

• Children of less than 3 years should be kept away unless continuously

supervised.

• CAUTION - The plastic bags and packaging used to wrap this

appliance may be dangerous. To avoid the risk of suﬀocation, keep

these bags out of reach of babies and children. These bags are not

toys.

• Ensure that all packaging materials and any promotional labels or

stickers are removed from the appliance before the ﬁrst use.

SAFETY – PLACEMENT

• Place the device away from other objects in an open space with good

airﬂow. Allow suﬃcient ventilation. Make sure that no objects block

the air vents.

• ATTENTION - Do not place the appliance on moisture-sensitive

objects or surfaces (i.e. electrical appliances, wooden furniture,

carpet) during operation, while ﬁlling the tank or when performing

routine maintenance. Water may leak out or precipitate and cause

permanent damage or stains.

SAFETY – OPERATION

• Always inspect the appliance before use for noticeable signs of

damage. Do not use if it has been damaged or has been dropped. In

the event of damage, or if the appliance develops a fault, contact a

qualiﬁed electrician.

• Make sure your electricity supply matches the voltage shown on the

appliance label.

• Unplug the appliance from the mains electricity when not in use

and before cleaning. To unplug, pull the power plug from the mains

socket.

• To protect against ﬁre, electric shock or personal injury, do not

immerse cord or device in water or other liquids.

• Always ensure that your hands are dry before removing the power

plug from the mains socket. Never pull the plug out of the mains

socket by its lead.

• To avoid injury or possible ﬁre, do not cover the appliance when in

use.

• Do not connect this appliance to an external timer or remote-control

system.

• An extension cable may be used with caution. The electrical rating of

the cable should be at least as high as that of the device. Do not allow

the cable to hang over the edge of the worktop, or touch any hot

surfaces.

• Empty the tank and base when the appliance is not in use. Only

operate the device with fresh, clean water.

TECHNICAL SPECIFICATIONS CHD-A4000M

RATED INPUT AC 220-240V, 50Hz ........................................................................................................

APPLIANCE POWER CONSUMPTION 28 W ......................................................................................

WATER OUTPUT PER HOUR 300ml (±30ml)/hour ...........................................................................

MAX. RECOMMENDED APPLICATION AREA 35m .........................................................................

TANK VOLUME 4000ml ..........................................................................................................................

OPERATING TEMPERATURE 5°C~45°C ...............................................................................................

dB <35dB ....................................................................................................................................................

SIZE 175 x 175 x 290 mm .........................................................................................................................

CHD-A4000M - ULTRASONIC HUMIDIFIER

INTENDED USE

Your new Pingi Cascada humidiﬁer CHD-A4000M is suitable for humidifying the air in enclosed indoor spaces.

The appliance operates on 220-240V, 50Hz (mains electricity). Never try to connect the device to other

power sources. Please always follow the safety instructions in this manual. Keep this instruction manual in

a safe place so that it is available at all times. This product complies with regulatory, national and European

requirements. Never try to make technical modiﬁcations to this device. We do not accept liability for accidents

or damages resulting from failure to follow these operating and safety instructions.

WHAT TO EXPECT

The Pingi Cascada humidiﬁer CHD-A4000M is an ultrasonic humidiﬁer that atomises water. High-frequency

vibrations transform up to 300 ml (±30ml) of water per hour into a ﬁne mist. This means it will increase

the humidity level in the air by generating millions of small droplets. The device has a 4L tank. The CHD-

A4000M has multiple speed settings and can automatically maintain the ambient humidity level you select.

Humidiﬁers need to be cleaned regularly to prevent limescale build-up or bioﬁlm formation. Please refer to the

cleaning section for further information.

BEFORE YOU START

Please carefully read the safety instructions on the front page of this manual before getting

started.

PLACEMENT AND INSTALLATION

1. Select a level surface that provides suﬃcient distance between the humidiﬁer and any walls and other

objects. Please mind that some water may escape from the base or tank when installing the tank. Do not

place the device on or near moisture-sensitive objects or surfaces.

2. If needed, install the included ﬁlter cartridge in the appropriate slot in the base.

3. Plug in the device.

We recommend using this appliance in rooms with a room temperature of 18 - 22 °C

FILLING THE TANK

1. Empty and ﬂush the tank. Then ﬁll it with cold tap water. The tank can hold up to 4L of water.

2. Place the ﬁlled tank on the base and replace the tank cover.

3. You can change the direction of the mist output by rotating the mist nozzles.

4. You can add water at any time without removing the tank from the base.

SWITCHING ON THE HUMIDIFIER

The humidiﬁer can be switched on and oﬀ with the control dial. After switching on the appliance, the

indicator LED will become green and the device will start to emit humidity. Use the dial to select the desired

power setting and to switch oﬀ the appliance. Selecting a higher power level will increase the amount of mist

produced.

OUT OF WATER SIGNAL

The humidiﬁer will automatically switch oﬀ when it detects that the tank is empty. The indicator LED will turn

red when the tank is empty. Fill the tank to resume operation. The indicator LED will become green.

CLEANING

Both the tank and base need to be cleaned regularly.

We recommend cleaning the appliance once a week.

Important notices:

- Make sure the device is unplugged when cleaning it.

- Do not pour hot water in the tank.

- Do not use detergents or chlorine.

- Use vinegar or a coﬀee machine descaling ﬂuid.

Procedure:

Water tank: Empty out the water tank. Rinse the water tank with cold water and some vinegar (1 cup).

Optionally use a soft brush. Thoroughly ﬂush the tank after emptying out the vinegar solution.

Base: Empty out the base. Use a microﬁbre cloth with some cold water to clean it.

Filter cartridge: Rinse the ﬁlter cartridge with hot water. Optionally soak the ﬁlter several minutes in hot

water.

Ultrasonic element: The ultrasonic element is located in the base. Over time limescale deposits may become

visible on and around this element. If you notice this, it may require descaling. Empty out the base and

pour a mixture 1 part water and 1 part vinegar in the base. Wait for at least 30 minutes before pouring out

the vinegar. You may use a soft brush. Do not use hard brushes or tools, as this may damage the ultrasonic

element. Thoroughly rinse the base before switching on the appliance again.

Exterior: If necessary, wipe oﬀ the exterior of the appliance with a lightly dampened cloth.

BOX CONTENT

CHD-A4000M - ULTRASONIC HUMIDIFIER

HUMIDIFIER

CHD-A4000M

INSTRUCTION

MANUAL

PARTS

Water

tank

Control

dial

Tank cover

Base

Mist nozzle

Indicator LED

Product specificaties

Merk:	Pingi
Categorie:	Luchtbevochtiger
Model:	Cascada CHD-A4000M

Heb je hulp nodig?

Als je hulp nodig hebt met Pingi Cascada CHD-A4000M stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Luchtbevochtiger Pingi

Pingi Cascada CHD-A4000M Handleiding

18 November 2024

Pingi Cascada CHD-A4000D Handleiding

18 November 2024

Pingi I-Dry XL Handleiding

8 Juli 2023

Pingi Cascada CHD-W6000D Handleiding

28 Juni 2023

Handleiding Luchtbevochtiger

Nieuwste handleidingen voor Luchtbevochtiger

Ruggard PDC9-BRS Handleiding

13 December 2024

Ruggard EDC-600L Handleiding

13 December 2024

Ruggard PDC10-CYS Handleiding

13 December 2024

Ruggard PDC24-BB Handleiding

13 December 2024

Ruggard EDC-235L Handleiding

13 December 2024

Ruggard PDC24-BBS Handleiding

13 December 2024

Ruggard EDC-FP90L Handleiding

13 December 2024

Ruggard PDC10-CY Handleiding

13 December 2024

Vornado Votiv 7 Handleiding

7 December 2024

Vornado EV3 Handleiding

7 December 2024