Philips SteamGlide GC2810 Handleiding

Philips Strijkijzer SteamGlide GC2810

Lees hieronder de 📖 handleiding in het Nederlandse voor Philips SteamGlide GC2810 (10 pagina's) in de categorie Strijkijzer. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/10

GC2800 Series

CALC

CLEAN

2 3 4 5

6 7 8 9

10 11 12 13

D E F GA B C

JKLM

ENGLISH

Introduction

Congratulations on your purchase and welcome to

Philips! To fully benet from the support that Philips offers,

General description (Fig. 1)

A Spray nozzle

B Cap of lling opening

C Spray button 8

D Steam control

b= Calc-Clean function

0 = no steam

l = minimum steam

; = maximum steam

E Steam boost button \

F Auto-off light (GC2860 only)

G Mains cord

H Temperature light

I Anti-Calc tablet (GC2860/GC2840/GC2830/

GC2820 only)

Note: Anti-Calc tablet not visible from the outside.

J Type plate

K Water tank

L Temperature dial

M Soleplate

Important

Read this user manual carefully before you use the

appliance and save it for future reference.

Danger

Never immerse the iron in water.

Warning

Check if the voltage indicated on the appliance

corresponds to the local mains voltage before you

connect the appliance.

Do not use the appliance if the plug, the mains cord

or the appliance itself shows visible damage, or if the

appliance has been dropped or leaks.

If the mains cord is damaged, you must have it

replaced by Philips, a service centre authorised by

Philips or similarly qualied persons in order to avoid

a hazard.

Never leave the appliance unattended when it is

connected to the mains.

This appliance is not intended for use by persons

(including children) with reduced physical, sensory

or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision

or instruction concerning use of the appliance by a

person responsible for their safety.

Children should be supervised to ensure that they

do not play with the appliance.

Do not let the mains cord come into contact with

the hot soleplate of the iron.

Caution

Only connect the appliance to an earthed wall

socket.

Check the mains cord regularly for possible damage.

The soleplate of the iron can become extremely hot

and may cause burns if touched.

When you have nished ironing, when you clean the

appliance, when you ll or empty the water tank and

also when you leave the iron even for a short while:

set the steam control to position O, put the iron on

its heel and remove the mains plug from the wall

socket.

Always place and use the iron on a stable, level and

horizontal surface.

Do not put perfume, vinegar, starch, descaling agents,

ironing aids or other chemicals in the water tank.

This appliance is intended for household use only.

Electromagnetic elds (EMF)

This Philips appliance complies with all standards

regarding electromagnetic elds (EMF). If handled

properly and according to the instructions in this user

manual, the appliance is safe to use based on scientic

evidence available today.

Before first use

1 Remove any sticker or protective foil from the

soleplate.

2 Let the iron heat up to maximum temperature and

pass the iron over a piece of damp cloth for several

minutes to remove any residues from the soleplate.

Preparing for use

Filling the water tank

Do not put perfume, vinegar, starch, descaling agents,

ironing aids, chemically descaled water or other

chemicals in the water tank.

1 Switch off the appliance and unplug it.

2 Set the steam control to position 0 (= no

steam) (Fig. 2).

3 Openthecapofthellingopening.

4 Tilttheironandllthewatertankuptomaximum

level under the tap (Fig. 3).

Note: Do not ll the water tank beyond the MAX indication.

Note: If the tap water in your area is very hard, we advise

you to use distilled water. Do not use chemically descaled

water.

5 Closethecapofthellingopening(‘click’).

Selecting the temperature and the steam

settings

Fabric type Temperature

setting

Steam

setting

Steam

boost

Linen MAX Yes&

Cotton Yes3&

Wool N.A.2$

Silk 0 N.A.1

Synthetic

fabrics (e.g.

Acrylic, nylon,

polyamide,

polyester).

10 N.A.

Check the laundry care label for the required ironing

temperature:

If you do not know what kind or kinds of fabric an article

is made of, determine the right ironing temperature by

ironing a part that will not be visible when you wear or

use the article.

Silk, woollen and synthetic materials: iron the reverse side

of the fabric to prevent shiny patches. Avoid using the

spray function to prevent stains.

1 To set the appropriate ironing temperature, turn

the temperature dial to the appropriate position

(see‘Temperatureandsteamsettingstable’)(Fig.4).

2 Set the appropriate steam setting (see

‘Temperatureandsteamsettingstable’).

Note: Make sure that the steam setting you select is suitable

for the set ironing temperature.

3 Put the iron on its heel.

4 Put the mains plug in an earthed wall socket.

The temperature light goes on.

5 When the temperature light goes out, wait a while

before you start ironing.

During ironing, the temperature light goes on from

time to time. This indicates that the iron is heating

up to the set temperature.

Using the appliance

Note: The iron may give off some smoke when you use it for

the rst time. This stops after a short while.

Steam ironing

1 Make sure that there is enough water in the water

tank.

2 Set the recommended ironing temperature (see

chapter‘Preparingforuse’,‘Temperatureandsteam

settingtable’).

3 Set the appropriate steam setting. Make sure

that the steam setting is suitable for the ironing

temperature selected:

$ for minimum steam (temperature settings 2

and ). 3

& for maximum steam (temperature settings 3

to MAX).

Note: The iron starts to produce steam as soon as it has

reached the set temperature.

Ironing without steam

1 Set the steam control to position 0 (= no

steam) (Fig. 2).

2 Set the recommended ironing temperature (see

chapter‘Preparingforuse’,‘Temperatureandsteam

settingtable’).

Features

Spray function

You can use the spray function at any temperature

to moisten the article to be ironed. This helps

remove stubborn creases.

1 Make sure that there is enough water in the water

tank.

2 Press the spray button several times to moisten the

article to be ironed (Fig. 5).

Steam boost function

A powerful boost of steam helps to remove very

stubborn creases.

The steam boost function only works at temperature

settings between and MAX. 3

1 Press and release the steam boost button (Fig. 6).

Vertical shot of steam

You can also use the steam boost function when you hold

the iron in vertical position. This is useful for removing

creases from hanging clothes, curtains etc.

1 Hold the iron in vertical position and press and

release the steam boost button (Fig. 7).

Never direct the steam at people.

Drip stop

This iron is equipped with a drip-stop function: the

iron automatically stops producing steam when the

temperature is too low to prevent water from dripping

out of the soleplate. When this happens you hear a click

sound.

Automatic shut-off function (specic

types only)

The automatic shut-off function automatically switches off

the iron if it has not been moved for a while.

Theredauto-offlightashestoindicatethatthe

iron has been switched off by the automatic shut-

off function (Fig. 8).

To let the iron heat up again:

1 Pick up the iron or move it slightly.

Theautomaticshut-offlightstopsashing.

If the temperature of the soleplate has dropped

below the set ironing temperature, the temperature

light goes on.

2 If the temperature light goes on after you have

moved the iron, wait for it to go out before you

start ironing.

Note: If the temperature light does not go on after you move

the iron, the soleplate still has the right temperature and the

iron is ready for use.

Cleaning and maintenance

Cleaning

1 Set the steam control to position 0, remove the

plug from the wall socket and let the iron cool

down.

2 Wipeakesandanyotherdepositsoffthe

soleplate with a damp cloth and a non-abrasive

(liquid) cleaning agent.

4239.000.7099.1

2/10

To keep the soleplate smooth, avoid hard contact with

metal objects. Never use a scouring pad, vinegar or

other chemicals to clean the soleplate.

3 Clean the upper part of the iron with a damp cloth.

4 Regularly rinse the water tank with water. Empty

the water tank after you have rinsed it (Fig. 9).

Double-Active Calc System (specic types

only)

Note: Refer to chapter ‘General description’ for the specic

type numbers.

The Double-Active Calc System consists of an Anti-Calc

tablet inside the water tank combined with the Calc-

Clean function.

The Anti-Calc tablet prevents scale from clogging the

steam vents. The tablet is constantly active and does

not need to be replaced (Fig. 10).

The Calc-Clean function removes scale particles

from the iron.

Calc-Clean function

Use the Calc-Clean function once every two weeks. If

the water in your area is very hard (i.e. when akes come

out of the soleplate during ironing), use the Calc-Clean

function more frequently.

1 Make sure the appliance is unplugged.

2 Set the steam control to position 0.

3 Fill the water tank to the maximum level.

Do not pour vinegar or other descaling agents into the

water tank.

4 Set the temperature dial to MAX (Fig. 11).

5 Put the mains plug in an earthed wall socket.

6 Unplug the iron when the temperature light goes

out.

7 Hold the iron over the sink. Push the steam control

to the Calc-Clean position and hold it. Gently shake

the iron to and fro (Fig. 12).

Steam and boiling water come out of the soleplate.

Impuritiesandakes(ifany)areushedout.

8 Release the steam control as soon as all the water

in the tank has been used up.

9 Repeat the Calc-Clean process if the iron still

contains a lot of impurities.

After the Calc-Clean process

1 Put the plug back into the wall socket and let the

iron heat up to let the soleplate dry.

2 Unplug the iron when the temperature light goes

out.

3 Move the iron gently over a piece of used cloth to

remove any water stains that may have formed on

the soleplate.

Storage

1 Set the steam control to position 0, remove the

plug from the wall socket and let the iron cool

down.

2 Wind the mains cord round the cord storage

facility (Fig. 13).

3 Store the iron on its heel in a safe and dry place.

Environment

Do not throw away the appliance with the normal

household waste at the end of its life, but hand it in

at an ofcial collection point for recycling. By doing

this, you help to preserve the environment (Fig. 14).

Guarantee service&

If you need service or information or if you have a

problem, please visit the Philips website at www.philips.

com or contact the Philips Consumer Care Centre

in your country (you nd its phone number in the

worldwide guarantee leaet). If there is no Consumer

Care Centre in your country, go to your local Philips

dealer.

Troubleshooting

This chapter summarises the most common problems

you could encounter with the appliance. If you are unable

to solve the problem with the information below, contact

the Consumer Care Centre in your country.

Problem Cause Solution

The iron is

plugged in, but

the soleplate is

cold.

There is a connection

problem.

Check the mains cord, the plug and

the wall socket.

The temperature dial is

set to MIN.

Set the temperature dial to the

required position.

The iron does

not produce any

steam.

There is not enough

water in the water tank.

Fill the water tank (see chapter

‘Preparing for use’, section ‘Filling the

water tank’).

The steam control is

set to position 0.

Set the steam position to $

or (see chapter ‘Using the &

appliance’, section ‘Steam ironing’).

The iron is not hot

enough and/or the

drip-stop function has

been activated.

Set an ironing temperature that is

suitable for steam ironing ( to 2

MAX). Put the iron on its heel and

wait until the temperature light goes

out before you start ironing.

The steam

boost function

does not work

properly.

You have used

the steam boost

function too often

within a very short

period.

Continue ironing in horizontal

position and wait a while before you

use the steam boost function again.

The iron is not hot

enough.

Set an ironing temperature at which

the steam boost function can be

used ( to MAX). Put the 3

iron on its heel and wait until the

temperature light goes out before

you use the steam boost function.

Flakes and

impurities come

out of the

soleplate during

ironing.

Hard water forms

akes inside the

soleplate.

Use the Calc-Clean function one or

more times (see chapter ‘Cleaning

and maintenance’, section ‘Calc-

Clean function’).

The light on the

handle ashes

(GC2860 only).

The automatic shut-off

function has been

activated (see chapter

‘Features’, section

‘Automatic shut-off ’).

Pick the iron up or move it slightly

to deactivate the automatic shut-off

function. The automatic shut-off light

goes out.

Water droplets

drip on the

fabric during

ironing.

You have not closed

the cap of the lling

opening properly.

Press the cap until you hear a click.

The set temperature

is too low for steam

ironing.

Set an ironing temperature that is

suitable for steam ironing ( to 2

MAX). Put the iron on its heel and

wait until the temperature light goes

out before you start ironing.

You have put an

additive in the water

tank.

Rinse the water tank and do not put

any additive in the water tank.

You have used the

steam boost function at

a setting below 3.

Set the temperature dial to a setting

between 3 and MAX.

You have used the

steam boost function

too often within a

short period.

Continue ironing in horizontal

position and wait a while before you

use the steam boost function again.

Water drips

from the

soleplate after

the iron has

cooled down or

has been stored.

You have put the iron

in horizontal position

while there was still

water in the water tank.

Empty the water tank and set the

steam control to position 0 after use.

Store the iron on its heel.

4239.000.7099.1

3/10

Product specificaties

Merk:	Philips
Categorie:	Strijkijzer
Model:	SteamGlide GC2810

Heb je hulp nodig?

Als je hulp nodig hebt met Philips SteamGlide GC2810 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Strijkijzer Philips

Philips 2500 series GC2540 Handleiding

24 November 2024

Philips Azur 7500 Series DST7510 Handleiding

24 November 2024

Philips 5000 Series DST5020 Handleiding

24 November 2024

Philips 5000 Series DST5021 Handleiding

24 November 2024

Philips Azur DST7012 Handleiding

24 November 2024

Philips Azur 7500 Series DST7511 Handleiding

24 November 2024

Philips Azur 7000 Series DST7051 Handleiding

24 November 2024

Philips Azur 8000 Series DST8041 Handleiding

24 November 2024

Philips 7000 Series DST7040 Handleiding

24 November 2024

Philips 7000 Series DST7061 Handleiding

24 November 2024

Handleiding Strijkijzer

Nieuwste handleidingen voor Strijkijzer

Rowenta Compact Steam Station DG7530 Handleiding

4 December 2024

Calor FV5695C0 Handleiding

2 December 2024

Calor FV9834C0 Handleiding

2 December 2024

Calor Ultimate Pure FV9834 Handleiding

2 December 2024

Calor TurboPro Anti-Calc FV5695 Handleiding

2 December 2024

Calor Turbo Pro Anti-Calc FV5696 Handleiding

2 December 2024

Calor Maestro 2 FV1844 Handleiding

2 December 2024

Calor Ultimate FV9839 Handleiding

2 December 2024

Calor Pro Express Ultimate GV9568 Handleiding

2 December 2024

Calor Ultimate Pure FV9838C0 Handleiding

2 December 2024