Philips GC3320 Handleiding

Philips Strijkijzer GC3320

Lees hieronder de 📖 handleiding in het Nederlandse voor Philips GC3320 (9 pagina's) in de categorie Strijkijzer. Deze handleiding was nuttig voor 98 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/9

GC3300 SERIES

2 3 4 5

6 7 8 9

10 11 12 13

14 15 16

ENGLISH

Introduction

Congratulations on your purchase and welcome to

Philips! To fully benet from the support that Philips offers,

Important

Read this user manual carefully before you use the

appliance and save it for future reference.

Danger

Never immerse the iron in water.

Warning

Check if the voltage indicated on the appliance

corresponds to the local mains voltage before you

connect the appliance.

Do not use the appliance if the plug, the mains cord

or the appliance itself shows visible damage, or if the

appliance has been dropped or leaks.

If the mains cord is damaged, you must have it

replaced by Philips, a service centre authorised by

Philips or similarly qualied persons in order to avoid

a hazard.

Never leave the appliance unattended when it is

connected to the mains.

This appliance is not intended for use by persons

(including children) with reduced physical, sensory

or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision

or instruction concerning use of the appliance by a

person responsible for their safety.

Children should be supervised to ensure that they

do not play with the appliance.

Do not let the mains cord come into contact with

the hot soleplate of the iron.

Caution

Only connect the appliance to an earthed wall

socket.

Check the mains cord regularly for possible damage.

The soleplate of the iron can become extremely hot

and may cause burns if touched.

When you have nished ironing, when you clean the

appliance, when you ll or empty the water tank and

also when you leave the iron even for a short while:

set the steam control to position 0, put the iron on

its heel and remove the mains plug from the wall

socket.

Always place and use the iron on a stable, level and

horizontal surface.

Do not put perfume, vinegar, starch, descaling agents,

ironing aids or other chemicals in the water tank.

This appliance is intended for household use only.

Electromagnetic elds (EMF)

This Philips appliance complies with all standards

regarding electromagnetic elds (EMF). If handled

properly and according to the instructions in this user

manual, the appliance is safe to use based on scientic

evidence available today.

General description (Fig. 1)

A Spray nozzle

B Filling opening with cap

C Steam boost button ( ) 9

D Spray button ( ) 8

E Steam control

F Amber temperature light (specic types only: with

red auto-off indication)

G Calc-Clean button

H Temperature dial

I Mains cord

J Heel

K Anti-Calc tablet (specic types only)

L Water tank

Not shown: lling cup

Before first use

1 Remove any sticker, protective foil or plastic from

the soleplate (Fig. 2).

Preparing for use

Filling the water tank

Do not put perfume, vinegar, starch, descaling agents,

ironing aids or other chemicals in the water tank.

1 Make sure the appliance is unplugged.

2 Set the steam control to position 0 (= no

steam) (Fig. 3).

3 Openthecapofthellingopening.

4 Tilttheironbackwardsandusethellingcuptoll

the water tank with tap water up to the maximum

level. (Fig. 4)

Do not ll the water tank beyond the MAX indication.

5 Closethecapofthellingopening(‘click’).

Setting the temperature

1 Put the iron on its heel.

2 To set the required ironing temperature, turn the

temperature dial to the appropriate position (Fig. 5).

Check the laundry care label for the required ironing

temperature:

1 for synthetic fabrics (e.g. acrylic, nylon, polyamide,

polyester)

1 for silk

2 for wool

3 for cotton and linen

If you do not know what kind or kinds of fabric an article

is made of, determine the right ironing temperature by

ironing a part that is not visible when you wear or use

the article.

Silk, woollen and synthetic materials: iron the reverse side

of the fabric to prevent shiny patches. To prevent stains,

do not use the spray function.

Start ironing the articles that require the lowest ironing

temperature, such as those made of synthetic bres.

3 Put the mains plug in an earthed wall socket.

The amber temperature light goes on (Fig. 6).

4 When the temperature light goes out, wait a while

before you start ironing.

The temperature light goes on from time to time during

ironing.

Using the appliance

Note: The iron may give off some smoke when you use it for

the rst time. This stops after a short while.

Steam ironing

1 Make sure that there is enough water in the water

tank.

2 Set the recommended ironing temperature (see

chapter‘Preparingforuse’,section‘Settingthe

temperature’).

3 Set the appropriate steam setting. Make sure that

the steam setting is suitable for the set ironing

temperature: (Fig. 7)

1 - 2 for moderate steam (temperature settings 2

to ) 3

3 - 4 for maximum steam (temperature settings

3 to MAX)

Note: The iron starts to produce steam as soon as it

has reached the set temperature.

Note: If the selected ironing temperature is too low (MIN

to 2), water may drip from the soleplate (see chapter

‘Features’, section ‘Drip stop’).

Ironing without steam

1 Set the steam control to position 0 (= no

steam) (Fig. 3).

2 Set the recommended ironing temperature (see

chapter‘Preparingforuse’,section‘Settingthe

temperature’).

Features

Spray function

You can use the spray function at any temperature to

moisten the article to be ironed. This helps remove

stubborn creases.

1 Make sure that there is enough water in the water

tank.

2 Press the spray button several times to moisten the

article to be ironed (Fig. 8).

Steam boost

A powerful steam boost helps to remove very stubborn

creases.

The steam boost function can only be used at

temperature settings between 2 and MAX.

1 Press and release the steam boost button (Fig. 9).

Concentrated steam boost from the special

Steam Tip (specic types only)

The concentrated steam boost from the long vents in

the Steam Tip enhances the distribution of steam into

every part of your garment. The concentrated steam

boost function can only be used at temperature settings

between 2 and MAX.

1 Press and release the steam boost button (Fig. 10).

Vertical steam boost

You can also use the steam boost function when you hold

the iron in vertical position. This is useful for removing

creases from hanging clothes, curtains etc.

1 Hold the iron in vertical position and press and

release the steam boost button (Fig. 11).

Never direct the steam at people.

Drip stop (specic types only)

This iron is equipped with a drip-stop function: the

iron automatically stops producing steam when the

temperature is too low, to prevent water from dripping

out of the soleplate. When this happens you may hear a

sound.

Automatic shut-off function (specic types

only)

The automatic shut-off function automatically switches off

the iron if it has not been moved for a while.

The red auto-off indication of the temperature light

ashestoindicatethattheironhasbeenswitched

off by the automatic shut-off function (Fig. 6).

To let the iron heat up again:

1 Pick up the iron or move it slightly

The red auto-off indication goes out.

If the temperature of the soleplate has dropped

below the set ironing temperature, the amber

temperature light goes on.

2 If the amber temperature light goes on after you

have moved the iron, wait for it to go out before

you start ironing.

Note: If the amber temperature light does not go on

after you move the iron, the soleplate still has the right

temperature and the iron is ready for use.

Cleaning and maintenance

Cleaning

1 Set the steam control to position 0, remove the

plug from the wall socket and let the iron cool

down.

2 Wipeakesandanyotherdepositsoffthe

soleplate with a damp cloth and a non-abrasive

(liquid) cleaning agent.

To keep the soleplate smooth, avoid hard contact with

metal objects. Never use a scouring pad, vinegar or

other chemicals to clean the soleplate.

3 Clean the upper part of the iron with a damp cloth.

4 Regularly rinse the water tank with water. Empty

the water tank after you have rinsed it (Fig. 12).

Double-Active Calc System (specic types

only)

The Double-Active Calc System consists of an Anti-Calc

tablet inside the water tank combined with the Calc-

Clean function.

1 The Anti-Calc tablet prevents scale from clogging the

steam vents. This tablet is constantly active and does

not need to be replaced (Fig. 13).

2 The Calc-Clean function removes the scale particles

from the iron.

Calc-Clean function

Use the Calc-Clean function once every two weeks. If

the water in your area is very hard (i.e. when akes come

out of the soleplate during ironing), use the Calc-Clean

function more frequently.

1 Make sure the appliance is unplugged.

2 Set the steam control to position 0.

4239.000.6589.5

2/9

3 Fill the water tank to the maximum level.

Do not pour vinegar or other descaling agents in the

water tank.

4 Set the temperature dial to MAX.

5 Put the mains plug in an earthed wall socket.

6 Unplug the iron when the temperature light goes

out.

7 Hold the iron over the sink, press and hold the

Calc-Clean button and gently shake the iron to and

fro (Fig. 14).

Steam and boiling water come out of the soleplate.

Impuritiesandakes(ifany)areushedout.

8 Release the Calc-Clean button as soon as all the

water in the tank has been used up.

9 Repeat the Calc-Clean process if the iron still

contains a lot of impurities.

After the Calc-Clean process

1 Put the plug back into the wall socket and let the

iron heat up to let the soleplate dry.

2 Unplug the iron when the temperature light goes

out.

3 Move the iron gently over a piece of used cloth to

remove any water stains that may have formed on

the soleplate.

4 Let the iron cool down before you store it.

storage

1 Set the steam control to position 0, remove the

plug from the wall socket and let the iron cool

down.

2 Wind the mains cord round the cord storage

facility (Fig. 15).

3 Store the iron on its heel in a safe and dry place.

Environment

Do not throw away the appliance with the normal

household waste at the end of its life, but hand it in

at an ofcial collection point for recycling. By doing

this, you help to preserve the environment (Fig. 16).

Guarantee & service

If you need service or information or if you have a

problem, please visit the Philips website at www.philips.

com or contact the Philips Consumer Care Centre

in your country (you nd its phone number in the

worldwide guarantee leaet). If there is no Consumer

Care Centre in your country, go to your local Philips

dealer.

Troubleshooting

This chapter summarises the most common problems you could encounter with the appliance. If you are unable to

solve the problem with the information below, contact the Consumer Care Centre in your country.

Problem Possible cause Solution

The iron is plugged in, but the soleplate

stays cold.

There is a connection

problem.

Check the mains cord, the plug and the wall

socket.

The temperature dial

is set to MIN.

Set the temperature dial to the required

position

The iron does not produce any steam. There is not enough

water in the water

tank.

Fill the water tank (see chapter ‘Preparing for

use’, section ‘Filling the water tank).

The steam control is

set to position 0.

Set the steam control to a position between 1

and 4 (see chapter ‘Using the appliance’, section

‘Steam ironing’).

The iron is not hot

enough and/or the

drip-stop function

has been activated

(specic types only).

Set an ironing temperature that is suitable for

steam ironing ( 2 to MAX). Put the iron on

its heel and wait until the amber temperature

light goes out before you start ironing.

Water droplets drip onto the fabric

during ironing.

The temperature

dial has been set to

a temperature that

is too low for steam

ironing.

Set an ironing temperature that is suitable for

steam ironing (temperature settings to 2

MAX). Put the iron on its heel and wait until

the amber temperature light goes out.

You have put an

additive in the water

tank.

Rinse the water tank and do not put any

additive in the water tank.

You have not closed

the cap of the lling

opening properly.

Press the cap until you hear a click.

Flakes and impurities come out of the

soleplate during ironing.

Hard water forms

akes inside the

soleplate.

Use the Calc-Clean function one or more

times (see chapter ‘Cleaning and maintenance’,

section ‘Calc-Clean function’).

The temperature light ashes red

(specic types only).

The automatic shut-off

function has switched

off the iron (see

chapter ‘Features’).

Move the iron slightly to deactivate the

automatic shut-off function. The red auto-off

indication of the temperature light goes out.

Water drips from the soleplate after

the iron has cooled down or has been

stored (specic types only)

You have put the iron

in horizontal position

while there was still

water in the water

tank.

Always set the steam control to position 0 and

empty the water tank after use. Store the iron

on its heel.

The iron does not produce a steam

boost.

You used the steam

boost function too

often within a short

period.

Continue ironing in horizontal position and

wait a while before you use the steam boost

function again..

The iron is not hot

enough.

Set an ironing temperature at which the steam

boost function can be used (temperature

settings 2 to MAX). Put the iron on its heel

and wait until the amber temperature light

goes out before you use the steam boost

function.

4239.000.6589.5

3/9

Product specificaties

Merk:	Philips
Categorie:	Strijkijzer
Model:	GC3320
Kleur van het product:	Blue, White
Gewicht:	1640 g
Breedte:	328 mm
Diepte:	129 mm
Hoogte:	163 mm
Snoerlengte:	3 m
Waterniveau-indicator:	Ja
Soort:	Droog- & stoomstrijkijzer
Capaciteit watertank:	0.3 l
Automatische snoeropwinder:	Ja
Sproeifunctie:	Ja
Continu stoom uitvoering:	35 g/min
Variabele stoom:	Ja
Zoolplaat materiaal/coating:	SteamGlide-zoolplaat
Steam boost performance:	100 g/min
Stoomstoot functie:	Ja
Draadloos:	Nee
Niet draaiende kabel:	Ja
Maximaal vermogen:	2300 W
Vermogen van strijkijzer:	2300 W
Spitse voorkant om moeilijk bereikbare plekjes te strijken:	Ja
AC-ingangsspanning:	220 - 240 V
AC-ingangsfrequentie:	50 - 60 Hz
Extra duidelijke indicator:	Ja
SteamGlide-zoolplaat:	Ja