Philips Comfort LongLife GC1621 Handleiding

Philips Strijkijzer Comfort LongLife GC1621

Lees hieronder de šŸ“– handleiding in het Nederlandse voor Philips Comfort LongLife GC1621 (5 pagina's) in de categorie Strijkijzer. Deze handleiding was nuttig voor 7 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5
Comfort LongLife
GC1630, GC1621, GC1620,
GC1615, GC1610
1 2 3
56 7
8 9 10
11 12 13
14 15 16
17 18
4
ENGLISH
General description (Fig. 1)
A Spray nozzle
B Filling opening
C Spray button T
D Steam control
O = no steam
q = moderate steam
w = maximum steam
x = Calc-Clean function
E Extra-steam function (GC1630/GC1621/
GC1620)
F Electronic safety shut-off function (GC1630
only)
G Temperature dial
H Temperature light
I Mains cord
J Type plate
K Anti-calc tablet
L Water tank
Important
Read these instructions for use carefully before
using the appliance and save them for future
reference.
Check if the voltage indicated on the type
plate corresponds to the local mains voltage
before you connect the appliance.
If the appliance is provided with an earthed
plug, it must be plugged into an earthed wall
socket.
Do not use the appliance if the plug, the cord
or the appliance itself shows visible damage,
or if the appliance has been dropped or is
leaking.
Check the cord regularly for possible damage.
If the mains cord is damaged, it must
be replaced by Philips, a service centre
authorised by Philips or similarly qualiī›€ed
persons in order to avoid a hazard.
Never leave the appliance unattended when it
is connected to the mains.
Never immerse the iron and the stand, if
provided, in water.
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure that
they do not play with the appliance.
The soleplate of the iron can become
extremely hot and may cause burns if
touched.
Do not allow the cord to come into contact
with the soleplate when it is hot.
When you have ī›€nished ironing, when you
clean the appliance, when you ī›€ll or empty
the water tank and also when you leave the
iron even for a short while: set the steam
control to position O, put the iron on its heel
and remove the mains plug from the wall
socket.
Always place and use the iron and the stand,
if provided, on a stable, level and horizontal
surface.
Do not put perfume, vinegar, starch, descaling
agents, ironing aids or other chemicals in the
water tank.
This appliance is intended for household use
only.
Electromagnetic ī›€elds (EMF)
This Philips appliance complies with all standards
regarding electromagnetic ī›€elds (EMF). If handled
properly and according to the instructions in this
-
-
-
-
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
user manual, the appliance is safe to use based on
scientiī›€c evidence available today.
Before first use
1 Remove any sticker or protective foil from
the soleplate.
2 Let the iron heat up to maximum
temperature and pass the iron over a piece of
damp cloth for several minutes to remove any
residues from the soleplate.
Note:The iron may give off some smoke when you
use it for the ī›€rst time. This will cease after a short
while.
Preparing for use
Filling the water tank
Never immerse the iron in water.
1 Make sure the appliance is unplugged.
2 Set the steam control to position O (= no
steam) (Fig. 2).
3 Tilt the iron backwards.
4 Fill the water tank with tap water up to the
maximum level. (Fig. 3)
Do not ī›€ll the tank beyond the MAX indication.
If the tap water in your area is very hard, we
advise you to mix it with an equal amount of
distilled water or to use distilled water only.
Do not put perfume, vinegar, starch, descaling
agents, ironing additives, chemically descaled
water or other chemicals in the water tank.
Setting the temperature
1 Put the iron on its heel.
2 Set the required ironing temperature
by turning the temperature dial to the
appropriate position (Fig. 4).
Check the laundry care label for the required
ironing temperature:
1 Synthetic fabrics (e.g. acrylic, nylon,
polyamide, polyester)
1 Silk
2 Wool
3 Cotton, linen
If you do not know what kind(s) of fabric(s) an
article is made of, determine the right ironing
temperature by ironing a part that will not be
visible when you wear or use the article.
Silk, woollen and synthetic materials: iron the
reverse side of the fabric to prevent shiny patches.
Avoid using the spray function to prevent stains.
Start ironing the articles that require the lowest
ironing temperature, such as those made of
synthetic ī›€bres.
3 Put the mains plug in an earthed wall socket.
4 When the temperature light has gone out,
wait a while before you start ironing (Fig. 5).
The temperature light will go on from time to time
during ironing.
Using the appliance
Steam ironing
1 Make sure that there is enough water in the
water tank.
2 Select the recommended ironing temperature
(see chapter ā€˜Preparing for useā€™, section
ā€˜Setting the temperatureā€™).
3 After the temperature light has gone out, set
the steam control to the appropriate steam
position. Make sure that the steam setting you
,
-
-
-
-
select is suitable for the ironing temperature
selected: (Fig. 6)
q for moderate steam (temperature settings
2 to MAX)
w for maximum steam (temperature settings
3 to MAX)
Note:The iron will start steaming as soon as the set
temperature has been reached.
Ironing without steam
1 Set the steam control to position O (= no
steam).
2 Select the recommended ironing temperature
(see chapter ā€˜Preparing for useā€™, section
ā€˜Setting the temperatureā€™).
Features
Spray function
You can use the spray function to remove stubborn
creases at any temperature.
1 Make sure that there is enough water in the
water tank.
2 Press the spray button several times to
moisten the article to be ironed (Fig. 7).
Extra steam (GC1630/GC1621/GC1620)
This function provides extra steam to remove very
stubborn creases.
The extra-steam function only works at
temperature settings between and 3
MAX.
1 Set the steam control to position (= w
maximum steam). (Fig. 8)
2 Press and hold the steam control for a
maximum of 5 seconds (Fig. 9).
3 Release the steam control and wait at least
1 minute before using this function again
to prevent water from dripping out of the
soleplate.
Electronic safety shut-off function
(GC1630 only)
The electronic safety shut-off function automatically
switches off the iron if it has not been moved for
a while.
The auto-off light starts blinking to indicate
that the iron has been switched off by the
safety shut-off function (Fig. 10).
In horizontal position, this will happen after 30
seconds.
In vertical position, this will happen after 8
minutes.
To let the iron heat up again:
Pick up the iron or move it slightly.
The auto-off light goes out and the
temperature light goes on.
When the temperature light has gone out and
goes on again, the iron is ready for use.
Cleaning and maintenance
After ironing
1 Remove the mains plug from the wall socket
and let the iron cool down.
2 Wipe scale and any other deposits off the
soleplate with a damp cloth and a non-
abrasive (liquid) cleaning agent.
To keep the soleplate smooth, you should avoid
hard contact with metal objects. Never use a
scouring pad, vinegar or other chemicals to clean
the soleplate.
3 Clean the upper part of the iron with a damp
cloth.
-
-
,
,
-
-
,
-
-
-
423900057945
2/5
4 Regularly rinse the water tank with water.
Empty the water tank after cleaning.
Double-Active Calc System
1 The anti-calc tablet prevents scale from
clogging the steam vents (Fig. 11).
The anti-calc tablet is constantly active and
does not need replacement.
2 The Calc-Clean function removes the scale
particles (Fig. 12).
Calc-Clean function
Use the Calc-Clean function once every two
weeks. If the water in your area is very hard (i.e.
when ī›akes come out of the soleplate during
ironing), you should use the Calc-Clean function
more frequently.
1 Set the steam control to position . O
2 Set the temperature dial to MAX.
3 Fill the water tank to the maximum level.
Do not pour vinegar or other descaling agents
into the water tank.
4 Put the plug in the wall socket.
5 Unplug the iron when the temperature light
has gone out.
6 Hold the iron over the sink and set the steam
control to the Calc-Clean position . (Fig. 13)x
7 Pull the steam control slightly upwards and
gently shake the iron until all water in the
tank has been used up.
Steam and boiling water will come out of the
soleplate. Scale (if any) will be ī›ushed out.
8 After having used the Calc-Clean function,
press the steam control back to its original
position and set it to position . O
Repeat the Calc-Clean process if the water coming
out of the iron still contains scale particles.
After the Calc-Clean process
1 Connect the iron to the mains to let the
soleplate dry.
2 Unplug the iron when the light has gone out.
3 Move the iron gently over a piece of used
cloth to remove any water stains that may
have formed on the soleplate.
4 Let the iron cool down before you store it.
Cleaning the steam control needle
1 Pull the steam control out of the
appliance. (Fig. 12)
2 Use vinegar to remove scale, if any, from the
needle (Fig. 14).
Do not bend or damage the steam control
needle.
3 Reinsert the steam control needle by
placing the point of the needle exactly in the
centre of the hole and by ī›€tting the small
projection on the side of the needle into the
slot (Fig. 15).
4 Set the steam control to position . O
Storage
1 Make sure the appliance is unplugged and set
the steam control to position . O
2 Empty the water tank (Fig. 16).
3 Wind the mains cord round the cord storage
facility.
4 Store the iron on its heel in a safe and dry
place (Fig. 17).
,
Environment
Do not throw the appliance away with the
normal household waste at the end of its life,
but hand it in at an ofī›€cial collection point
for recycling. By doing this you will help to
preserve the environment (Fig. 18).
Guarantee & service
If you need information or if you have a problem,
please visit the Philips website at www.philips.com
or contact the Philips Customer Care Centre in
your country (you will ī›€nd its phone number in
the worldwide guarantee leaī›et). If there is no
Customer Care Centre in your country, turn to
your local Philips dealer or contact the Service
Department of Philips Domestic Appliances and
Personal Care BV.
Troubleshooting
This chapter summarises the most common
problems you could encounter with your iron.
Please read the different sections for more details.
If you are unable to solve the problem, contact the
Customer Care Centre in your country.
Problem Cause Solution
The iron
is plugged
in but the
soleplate
is cold.
There is a
connection
problem.
Check the mains
cord, the plug and
the wall socket.
The
temperature
dial has
been set to
MIN.
Set the temperature
dial to the required
temperature.
The iron
does not
produce
any steam.
There is
not enough
water in the
water tank.
Fill the water
tank (see chapter
ā€˜Preparing for useā€™).
The steam
control has
been set to
position O.
Set the steam
control to position
q w or (see
chapter ā€˜Using the
applianceā€™).
The safety
shut-off
function has
switched the
iron off.
Move the iron
slightly to deactivate
the safety shut-off
function. The iron
will start heating up
again.
The iron
is not hot
enough.
Set the temperature
dial to a temperature
suitable for steam
ironing ( 2 to
MAX). Put the
iron on its heel
and wait until the
temperature light has
gone out before you
start ironing.
The
extra-
steam
function
does not
work
(GC1630/
GC1621/
GC1620).
The steam
control has
not been
pressed long
enough.
Press and hold the
steam control for
a maximum of 5
seconds.
,
Problem Cause Solution
The extra-
steam
function has
been used
too often
in a short
period.
Wait at least 1
minute before using
the extra-steam
function again.
The iron
is not hot
enough.
Set the temperature
control dial to
a temperature
between 3
and MAX. Put the
iron on its heel
and wait until the
temperature light has
gone out.
There is
not enough
water in the
water tank.
Fill the water
tank (see chapter
ā€˜Preparing for useā€™).
Water
leaks
from the
soleplate
when the
extra-
steam
function
(GC1630/
GC1621/
GC1620)
is being
used.
The iron
is not hot
enough.
Set the temperature
dial to a temperature
between 3
and MAX. Put the
iron on its heel
and wait until the
temperature light has
gone out.
The extra-
steam
function has
been used
too often
in a short
period.
Wait at least 1
minute before using
the extra-steam
function again (see
chapter ā€˜Featuresā€™).
The spray
function
does not
work.
There is
not enough
water in the
water tank.
Fill the water
tank (see chapter
ā€˜Preparing for useā€™).
Flakes and
impurities
come out
of the
soleplate
during
ironing.
You have
been using
hard water,
which has
caused
scale ī›akes
to develop
inside the
soleplate.
Use the Calc-Clean
function one or
more times (see
chapter ā€˜Cleaning and
maintenanceā€™).
Water
leaks
from the
soleplate
during
ironing.
The iron
is not hot
enough.
Set the temperature
dial to a temperature
suitable for steam
ironing ( 2 to
MAX). Put the
iron on its heel
and wait until the
temperature light has
gone out before you
start ironing.
Water
leaks
from the
soleplate
while the
iron is
cooling
down or
after it
has been
stored.
The iron has
been put in
horizontal
position
while there
is still water
in the water
tank.
Empty the water
tank and set the
steam control to
position O before
storing the iron (see
chapter ā€˜Storageā€™).
Place the iron on its
heel.
423900057945
3/5


Product specificaties

Merk: Philips
Categorie: Strijkijzer
Model: Comfort LongLife GC1621

Heb je hulp nodig?

Als je hulp nodig hebt met Philips Comfort LongLife GC1621 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Strijkijzer Philips

Handleiding Strijkijzer

Nieuwste handleidingen voor Strijkijzer