Peavey WMA 4300 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Peavey WMA 4300 (16 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 36 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16
1
WMA4300
Professional Series
Installation Power
Amplifer
Owners Manual
WMA™ 4300
Power Amplifier
The WMA 4300 is a high quality, commercial grade analog audio mixer/amplifier. Designed for flexibility in application, this mixer/
amp represents the latest state-of-the-art technology in analog and class-D circuit design. Powerful, yet easy to use, the new WMA
4300 delivers amazing sonic performance. Low-noise design using discrete-transistor, variable-gain preamps and features applicable
to “real-world” situations makes this unit ideal for audio applications where a wall mounted powered mixer with multiple input and
output capabilities are required.
This manual was written to provide as much information as possible for your new Crest Audio Professional Series Installation Power
Amplifier. It is our sincere desire that you enjoy your purchase. We feel that the best way to fully enjoy any purchase is to have an
in-depth understanding of the product’s features, functionality, and performance characteristics. We hope that this manual, along
with the manuals of our other products, will provide this. If you require additional information that this manual does not provide,
please let us know. We are continuously looking for better ways to provide information about our products, and your input is always
appreciated. If you require additional information not provided in this manualplease let us know or check out our website at:
Web site: http://peaveycommercialaudio.com/products.cfm/cr/:
Email: techserve@crestaudio.com
We are continuously looking for better ways to provide information about our products and your input is always appreciated.
ENGLISH
WMA 4300 Features:
Efficient 300 Watt class-D power amplifier
4 electronically balanced mic/line Inputs
Input 4 also has dual-RCA, summing connectors for
Auxiliary sources
Discrete-transistor, variable-gain, channel preamps for
consistent front panel level control.
Channel 1 Priority/Muting system with variable
threshold adjustment and mute indication
External switch input for “Mute Allcontrol with
indication
Bass and treble equalization controls
Electronically balanced line output with level control
and mix or channel 4 source selector
Channel input signal level indicators
Amplifier signal indicator
ACL (Automatic Clip Limiting) circuitry with
indicator
4 Ohm direct output
25 Volt, 70 Volt, and 100 Volt outputs
Power ON indicator
Line Voltage Selector switch for 100-120 VAC or
220-240 VAC 50/60 Hz operation
Key lockable door to prevent tampering with system
controls
All controls other than channel mix and master are
located behind front panel to protect system settings
Back box and electronics available separately
Top and Bottom knock-outs for 1/2” or 16mm conduit.
Can be surface mounted or flush mounted using front
panel trim (included)
Electronics can be retrofitted into previous generation
WMA 75 or 150 back box
Applications:
Presentation rooms Board rooms • Courtrooms Auditoriums Lecture halls • Meeting rooms Convention centers
Paging systems Background music Retail spaces Restaurants
3
LEVEL
1 2 3 4MASTER
POWER
SIGNAL
PEAK/MUTE
PROFESSIONAL SERIES INSTALLATION POWER AMPLIFIER
LOCAL
REMOTE IN
INPUTS
POWER
ON
FUSE
T6.3AL/250V
100 -120V
220- 240V
T3.15AL/250V
min max min max min max min max min max
WMA 4300
TM
SIGNAL
ACL /MUTE
FUSEFUSE
Front Panel
1
2
3
9
8
7
10
11
5
4
6
(1) Input Channel Level Controls
These rotary controls set the channel signal level sent to the mix bus. It is best set in the 12:00 to 2:00 range as indicated
on the front panel. The preamp gain control should then be adjusted for proper operating level.
(2) Input Channel Peak/Mute indicators
These red LEDs perform a dual purpose of indicating that the corresponding channel is muted and when the input
signal is too high and distortion can occur. To correct the problem, lower the corresponding channel gain in the installer
controls.
(3) Input Signal Indicator (SIG)
These LEDs illuminate green to indicate signal presence on the corresponding input.
(4) Output Signal Indicator (SIG)
These LEDs illuminate green to indicate signal presence to the mixer output master.
(5) ACL/Mute Indicator
This LED will illuminate red when the signal in the power amplifier reaches the point where the ACL circuit (Automatic
Clip limiter) engages. The ACL circuit reduces the gain automatically when necessary to prevent amplifier clipping. It
will also illuminate red when a switch closure is present on the Mute All input causing all signals through the amplifier to
be muted.
(6) Master level control
The master control sets the overall signal level of the system. It is best set in the 12:00 to 2:00 range as indicated on the
front panel.
(7) Power Indicator
This LED illuminates when WMA is powered and active.


Product specificaties

Merk: Peavey
Categorie: Niet gecategoriseerd
Model: WMA 4300

Heb je hulp nodig?

Als je hulp nodig hebt met Peavey WMA 4300 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Peavey

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd