Peavey SSE 15 Handleiding

Peavey Speaker SSE 15

Lees hieronder de 📖 handleiding in het Nederlandse voor Peavey SSE 15 (12 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 33 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/12
SNOITACIFICEPS
SSE ™ 15
Description
The SSE 15 is designed for professional
permanent installations where cabinets
must be own in order to cover as much
area as possible. The SSE 15 is designed
for arraying on stage, churches
auditoriums or theme parks. The horn has
a coverage pattern of 90˚ in the horizontal
axis and 40˚ in the vertical axis. The highs
are generated using the highly acclaimed
Peavey 14T titanium compression driver.
The Sound Guard IV tweeter protection
network is built in for driver protection.
The low end is produced using the Peavey
15" woofer with 2.5" (64 mm)
voice coil. Connections are made using a
4-pin twist-lock connector or a paralleled
two-position terminal block for additional
cabinets. The SSE 15 incorporates ying
points on the top and bottom for the
utilization of the Peavey VersaMount 70
mounting bracket.
The SSE 15 is constructed with a special
grade of high density 13 mm birch plywood
and covered with a durable acrylic
polyurethane. This nish makes the
enclosure presentable in any application.
The SSE 15 is available in black or white
nishes. The SSE 15 is engineered for
public address and a wide range of musical
applications.
Features:
• Two-way sound reinforcement
enclosure
• Designed for permanent install
• Full-range, wide-band production
from 74 Hz to 17 kHz
• Available in black or white nishes
• Peavey 15" woofer with
2.5" (64 mm) voice coil
• Peavey 14T™ titanium diaphragm
compression driver
• Sound Guard ™ IV tweeter
protection network
• Seven ying points (six M10 for
suspension and one M6 for angle
adjustment)
• Mounting point for VersaMount ™ 70
bracket
• 13 mm birch plywood construction
Fr requency esponse, me on axis 1 ter - ,
swept-sine in anechoic nvi e ronment:
74 17 k 3 )Hz to Hz (± dB
Usable low frequency limit (-10 dB
point):
54 Hz
Pow : er handling
Full an r ge:
500 Watts program
1,000 Wat peakts
Sound pressure vle el, 1 Watt, 1 meter in
anechoic envi onment r :
Full an r ge:
98 dB SPL 3 ut)(2.8 V inp
Maximum sound essu pr re vel le
(1 meter) :
Full an r ge:
1 dB SPL t uous22 con in
128 SPL peakdB
Radiation angle measu ed r at -6 dB
2
point of polar res nse:po
500 Hz to 1.6 kHz:
Horiz. 90˚ ± 20˚
Vert. 95˚ ± 30˚
1.6 kHz to 5 kHz:
Horiz. 70˚ ± 20˚
Vert. 60˚ ± 35˚
5 kHz to 16 kHz:
Horiz. 90˚ ± 15˚
Vert. 40˚ ± 10˚
Directivity factor, Q an):(Me
1 86 ± 6.70.
Directivity in x, Di an):de (Me
9.57 dB ± 2.6 dB
Tr sd er coan uc mplement:
Low fr cy tion:equen sec
Peavey Heavy Duty 15” fer woo
High fr cy tion:equen sec
Peavey 14T™ titanium diaphragm
compression driver a 90˚ x 40˚ on
constant directi ty rn vi ho
Box ng frtuni equency:
Low fr cy tion: equen sec
74 Hz
Ha mor nic distortion:
1% rated power
Second harm ic:on
100 Hz: 81%2.
1 kHz: 0 3%.1
Third harmonic:
100 Hz: 1.0%
1 kHz: 18%0.
10% rated power
Second harm ic:on
100 Hz: 91%8.
1 kHz: 56%0.
Third harmonic:
100 Hz: 62%5.
1 kHz: 0.32%
Electro-a uco stic crossover frequency
(int nal passive):er
2.8 kHz
I dance (Z):mpe
Full range:
No nal: 8 Ωmi
Mi mum: 5.4 Ωni
Input Connection:
One (1) 4-pin twist-lock connector in
parallel with one (1) two-position
terminal strip
Trapezoidal, dado-joined 13 mm birch
polyurethane. Also includes a full-length
metal grille covered with acoustical
grade grille cloth. Available in black
or white nishes.
Mounting provisions:
(6) M10 threaded mounting
suspension points (three each top and
one each side and back). Use only
forged shoulder machinery eye bolt,
DIN 580, ASTM A489, or BGV-C1 spec.
(1)
(4)
M6 mounting x 1.0mm threaded point
on back bottom for angle adjustments.
M6 mounting x 1.0mm threaded points
on bottom to accommodate use of
Versamount™ 70 adjustable mounting
bracket.
DO NOT suspend this unit upside down
using VersaMount™ system.
Dimensions (H x W x D):
Front:
27" x 18" x 17.75"
686 mm x 467 mm x 451 mm
Rear:
27" x 12.14" x 17.75"
686 mm x 308 mm x 451 mm
Net Weight:
42 lbs. (19 kg)
Frequency response
This measurement is useful in determining
how accurately a given unit reproduces an
input signal. The frequency response of
the SSE 15 is measured at a distance of 1
meter using a 1 Watt (into the nominal
impedance) swept-sine input signal. As
the SSE 15 combine to give a smooth
frequency response from 74 Hz to 17 kHz.
Directivity
Beamwidth is derived from the -6 dB
which are measured in a whole-space
anechoic environment. Q and Directivity
Index are plotted for the on-axis
measurement position. These are
the coverage characteristics of the unit.
These parameters provide insight for
proper placement and installation in the
chosen environment. The blending of the
components of the SSE 15 exhibit a
desirable beamwidth and directivity
reinforcement applications.
Power handling
power handling ratings. Peavey rates this
loudspeaker system’s power handling
using a full-range form of the AES
Standard 2-1984. Using audio band 20 Hz
to 20 kHz pink noise with peaks of four
times the RMS level, this strenuous test
signal assures the user that every portion
of this system can withstand today’s high
technology music. This rating is contingent
upon having a minimum of 3 dB of
Harmonic distortion
Second and third harmonic distortions vs.
two power levels. Ten percent (10%) of
rated input power and either one percent
(1%) of rated input power or 1 Watt,
whichever is greater. Distortion is read
the fundamental signal (frequency
response) and the desired harmonic. As an
example, a distortion curve that is down
40 dB from the fundamental is equivalent
to 1% distortion.
Mounting
Caution: Before attempting to suspend or
structural engineer. The speaker may fall
due to improper installation, resulting in
serious injury and property damage. DO
NOT suspend or mount any other product
or device from this enclosure. Maximum
enclosure angle 45˚. Use only Grade 8.8 Metric
hardware or better. All associated rigging
is the responsibility of others.
Architectural and Engineering
The loudspeaker system shall have an
operating bandwidth of 74 Hz to 17 kHz.
The nominal output level shall be 98 dB
when measured at a distance of one meter
with an input of one Watt. The nominal
impedance shall be 8 Ohms. The maximum
program power handling shall be 500
Watts with a peak power input of at least
headroom of 3 dB. The nominal radiation
geometry shall be 90˚ in the horizontal
plane and 40˚ in the vertical plane. The
outside dimensions shall be 27" high by
18" wide by 17.75" deep. The weight shall
be 42 lbs. The loudspeaker system shall
be a SSE 15 model.
change without notice.
WARRANTY INFORMATION A ILAVA BLE ONLINE
NOTE:
SPECIFICATIONS
SSE™ 15
3

Product specificaties

Merk: Peavey
Categorie: Speaker
Model: SSE 15

Heb je hulp nodig?

Als je hulp nodig hebt met Peavey SSE 15 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Speaker Peavey

Peavey

Peavey PVXp 15 DSP Handleiding

15 November 2024
Peavey

Peavey S-12825 RB Handleiding

12 Maart 2024
Peavey

Peavey SSE 10 Handleiding

27 Juli 2023
Peavey

Peavey RBN 118 Handleiding

22 Juni 2023
Peavey

Peavey PHR 860S Handleiding

15 Juni 2023
Peavey

Peavey ISM 5Tx Handleiding

1 Juni 2023
Peavey

Peavey PV 115D Handleiding

31 Mei 2023
Peavey

Peavey RBN 110 Handleiding

21 Mei 2023
Peavey

Peavey RX 22N Handleiding

18 Mei 2023
Peavey

Peavey SP 4P Handleiding

10 Mei 2023

Handleiding Speaker

Nieuwste handleidingen voor Speaker

JBL

JBL SVA2100 Handleiding

25 November 2024
JBL

JBL Studio L820 Handleiding

25 November 2024
JBL

JBL Studio L830 Handleiding

25 November 2024
JBL

JBL SoundPoint SP6 Handleiding

25 November 2024
JBL

JBL SU Center Handleiding

25 November 2024
JBL

JBL Leviton AE 50 Handleiding

25 November 2024
JBL

JBL SVA Center Handleiding

25 November 2024
JBL

JBL Studio S38 II Handleiding

25 November 2024
JBL

JBL SVA1800 Handleiding

25 November 2024
JBL

JBL Studio S36 Handleiding

25 November 2024