Peavey SSE 10 Handleiding

Peavey Speaker SSE 10

Lees hieronder de 📖 handleiding in het Nederlandse voor Peavey SSE 10 (12 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 38 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12
Description
The SSE is a new enclosure series
featuring high power ratings with custom
components, a sleek look and a unique,
snap-in metal grille. The SSE 10 is a two-
way system featuring the highly acclaimed
Peavey 14T titanium compression driver
with the diverse Sound Guard IV tweeter
protection network and a maximum-
performance 10" woofer for a smooth
response. The SSE 10 is rated at 400 Watts
program and 800 Watts peak. This
lightweight speaker system is ideal for
smaller venues where space is at a
premium. Connections are made using a
four-pin Twist-Lock or paralleled
two-position terminal block for additional
points on the top of the unit and mounting
points on the bottom for utilizing the
Peavey VersaMount 70 mounting bracket.
The SSE series is available in black or white.
Features:
• Two-way sound reinforcement
enclosure
• Designed for permanent install
or white
two
• Premium 10" woofer
• Peavey 14T ™titanium
compression driver
• Sound Guard ™IV tweeter
protection network
suspension and one M6 for angle
adjustment)
• Mounting point for VersaMount ™
70 bracket
• 13 mm Birch plywood
construction
• 400 Watts program/800 Watts
peak power handling
• 80 Hz to 17 kHz
• 95 dB at 1W/1m
• 8 Ohms
Fr ueq ency res e, 1 meter xis,pons on-a
swep -st ine in echan oic environment:
80 Hz to 17 z (±3 dB)kH
U e low frsabl eque y it (-10 dBnc lim
p t):oin
60 Hz
Power l g: hand in
Full range:
400 W program
800 W akpe
Sound pressure level, 1 Watt, 1 ter inme
anech c enviroi onm nte :
Full range:
95 dB SPL 2.83 V put)in
M iax mu soum nd pre ure level ss
(1 mete : r)
Full range:
118 dB SPL tcon inuous
124 dB SPL akpe
SP IFICATIONSEC
SSE â„¢10
2
Radiation angle measured 6 dBat
point polar response:of
500 Hz to 1.6 k :Hz
Horiz. 5˚ ± 25˚12
Vert. 130˚ ± 15˚
1.6 kHz to 5 kHz:
Horiz. 5˚ ± 20˚10
Vert. 75˚ ± 30˚
5 kHz to 16 z:kH
Horiz. 95˚ ± 25˚
Vert. 65˚ ± 10˚
Direc ivt ity factor, Q (Mean):
7.19 ± 6.07
Direc ivt ity i ex, Di (Mean):nd
8.09 dB ± 01 dB2.
Transducer complement:
Low freque y sect n:nc io
Premium-gra 10" wooferde
High frequency section:
Peavey 14Tâ„¢tita m diaphragmniu
compressio drn iver
on a 90° x 60° constant direct tivi y horn
Box ning frtu eque y:nc
Low freque y sect n:nc io
78 Hz
Harmonic distortion:
1% rated power
Second harm c:oni
100 Hz: 43%0.
1 kHz: 07%0.
Third harmonic:
100 Hz: 58%0.
1 kHz: 02%1.
10% r ed powerat
Second harm c:oni
100 Hz: 28%2.
1 kHz: 40%0.
Third harmonic:
100 Hz: 97%0.
1 kHz: 02%2.
Electro-acous c crti ossover frequency
(in rnal passive):te
2.1 kHz
I edance ):mp (Z
Full range:
Nom al: 8 Ωin
Min um: 6 Ωim
I ut Co ection:np nn
1 four-pi in paralleln Twist-Lock
with 1 two osition terminal strip-p
Trapezoidal, dado-joined, 12 mm 9-ply
polyurethane, with a full-length metal
grille covered with acoustical-grade grille
cloth. Available in black or white.
Mounting provisions:
(6)
(1)
(4)
M10 thr mounting eaded
suspension points ee each top (thr and
one each side and back). Use only
for machiner ey bolt,ged shoulder y e
DIN 580, ASTM A489, or BGV-C1 spec.
M6 mounting x 1.0mm threaded point
on back bottom for angle adjustments.
M6 x 1.0mm threaded mounting
points on bottom to accommodate use
of VersaMountâ„¢ 70 adjustable
mounting bracket.
DO NOT suspend this unit upside
down using the VersaMount system.
Dimensions (H x W x D):
Front:
19.63" x 15.09" x 12.12"
498 mm x 383 mm x 308 mm
Rear:
19.63" x 11.09" x 12.12"
498 mm x 383 mm x 308 mm
Net Weight:
29 lbs. (13.2 kg)
Frequency response
This measurement is useful in determining
how accurately a given unit reproduces an
input signal. The frequency response of
the SSE 10 is measured at a distance of 1-
meter using a 1 Watt (into the nominal
impedance) swept-sine input signal. As
the SSE 10 combine to give a smooth
frequency response from 80 Hz to 17 kHz.
Directivity
Beamwidth is derived from the -6 dB
which are measured in a whole space
anechoic environment. Q and Directivity
Index are plotted for the on-axis
measurement position. These
coverage characteristics of the unit and
provide insight into proper placement and
installation in the chosen environment.
The blending of the components of the
SSE 10 exhibit a desirable beamwidth and
sound reinforcement applications.
Power handling
roaches to
power handling ratings. Peavey rates this
loudspeaker system’s power handling
using a full-range form of the AES
Standard 2-1984. Using audio band 20 Hz
to 20 kHz pink noise with peaks of four
times the RMS level, this strenuous test
signal assures the user that every portion
of this system can withstand today's high
technology music. This rating is contingent
upon having a minimum of 3 dB of
Harmonic distortion
Second and third harmonic distortions vs.
two power levels. Ten percent (10%) of
rated input power and either one percent
(1%) of rated input power or 1 Watt,
whichever is greater. Distortion is read
the fundamental signal (frequency
response) and the desired harmonic. As an
example, a distortion curve that is down
40 dB from the fundamental is equivalent
to 1% distortion.
Mounting
Caution: Before attempting to suspend or
mount this speake
structural engineer. The speaker may fall
due to improper installation, resulting in
serious injury and property damage. DO
NOT suspend or mount any other product
or device from this enclosure. The
maximum enclosure angle is 45°. Use only
Grade 8.8 Metric hardware or better. All
rigging is the responsibility of others.
Architectural and Engineering
The loudspeaker system shall have an
operating bandwidth of 80 Hz to 17 kHz.
The nominal output level shall be 95 dB
when measured at a distance of a meter
with an input of 1 Watt. The nominal
impedance shall be 8 Ohms. The
maximum program power handling shall
be 400 Watts with a peak power input of at
headroom of 3 dB. The nominal radiation
geometry shall be 90Ëš in the horizontal
plane and 60Ëš in the vertical plane. The
outside dimensions shall be 19.63" high
by 15.09" wide by 12.12" deep. The weight
shall be 29 lbs. The loudspeaker system
shall be a model SSE 10.
change without notice.
WARRANTY INFORM INEATION A LABLE ONLVAI
NOTE:
SPECIFICATIONS
SSE
â„¢
10
20 50 100 200 500 1k 2k 5k 10k 20k
Frequency (Hz)
60
70
80
90
100
110
dB SPL (re 20 Pa)
Amplitude Response (1W 1m On-Axis)
Figure 1
20 50 100 200 500 1k 2k 5k 10k 20k
Frequency (Hz)
1
10
100
Q & Directivity Index
Q
Figure 4
20
10
Di
0
20 50 100 200 500 1k 2k 5k 10k 20k
Frequency (Hz)
30
40
60
80
100
140
180
300
360
Beamwidth (Degrees)
Beamwidth
Vertical
Horizontal
Figure 3
20 50 100 200 500 1k 2k 5k 10k 20k
Frequency (Hz)
1
2
3
5
10
20
30
50
100
Impedance
Z
( )
Figure 2
3


Product specificaties

Merk: Peavey
Categorie: Speaker
Model: SSE 10

Heb je hulp nodig?

Als je hulp nodig hebt met Peavey SSE 10 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker Peavey

Handleiding Speaker

Nieuwste handleidingen voor Speaker