Patton SN10200A/1DS3BU/RUI Handleiding

Patton Niet gecategoriseerd SN10200A/1DS3BU/RUI

Lees hieronder de 📖 handleiding in het Nederlandse voor Patton SN10200A/1DS3BU/RUI (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 288 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

Offering industry-leading highest port density, scalability, and lowest operating costs, the SmartNode 10200 Series

is a carrier-grade family of media gateways for service providers looking to drive convergence between TDM and IP

networks, replacing multiple devices for signaling, connectivity, and media transcoding with a single device

SmartNode™10200 Series

TDM+VoIP Smart Media Gateway

VoIP

16 to 64 x T1/E1/J1, 1 to 3 DS3, or 1

OC3/STM-1 in a 2U chassis

Highest system density in the market means the

lowest cost per port; up to 66% rack and space

cost savings

512 to 2,048 VoIP channels

(field upgradable)

Simple field upgrade by 16 T1/E1 and 512 VoIP

channels or 1 DS3 and 672 VoIP channels.

Increased system up-time

SS7 link redundancy, dual power supply support,

field-upgradable components

Low operating expense (up to 80% cost

savings) significantly improves ROI

Low power consumption (150 W for the

SN10200 at full capacity)

Connect with confidence to diverse

VoIP endpoints and IP fax

Extensive media handling support for wireline,

wireless and fax codecs

SmartNode™Awards

•2011 Internet Telephony Product of the Year:

SmartNode™ 5400/2GS

•2010 Internet Telephony Product of the Year:

SmartNode™5400

•2009 Internet Telephony Product of the Year:

SmartNode™

4400 Series

•2008 Internet Telephony Product of the Year:

SmartNode™

4961

•2007 Internet Telephony Product of the Year:

SmartNode™

S-DTA

•2006 Internet Telephony Product of the Year:

SmartNode™

4960

•2005 Internet Telephony Product of the Year:

SmartNode™

4630

Service providers are adding VoIP capabil-

ities to their networks, whether to reduce

costs when interconnecting with other

carriers, to cost-effectively build out their net-

work footprints, or simply to transport voice

traffic across their IP backbones. This can be

best accomplished using a SmartNode 10200

Series media gateway, that enables the deliv-

ery of VoIP services by bridging voice traffic

between the public switched telephone net-

work (PSTN)—based on time-division multi-

plexing (TDM)—and IP networks such as the

Internet. Whether sitting at the network core or

at the edge, SmartNode media gateways

enable service providers to introduce VoIP into

their networks while maintaining the quality

and the reliability of traditional TDM networks.

TDM interfaces

Service providers, whether providing local,

long-distance or international voice services,

are interconnected with a multitude of other

providers using T1/E1/J1, DS3 or STM-1 links.

It is critical for service providers to be able to

rapidly establish new interconnections without

having to always deploy new devices.

SmartNode 10200 Series media gateways

therefore offer flexibility and can be configured

to support T1/E1/J1, DS-3 or STM-1 interfaces.

Signaling and control protocols

Just as flexibility in the selection and deploy-

ment of TDM links is a key requirement for

service providers, the need to support multiple

signaling protocols across various carrier part-

ners is just as important. Each SN10200 media

gateway provides support for the concurrent

use of ISDN, SS7/C7, CAS (R2), SIP, and SIG-

TRAN signaling in the same device. The ability

to provide both switching and conversion

across multiple TDM and IP signaling protocols

at once is paramount to enabling the opera-

tional flexibility and cost savings that drive

service providers to expand their carrier rela-

tionships and converge their networks.

In parallel with the TDM and IP signaling proto-

cols mentioned above, SN10200 devices also

support the H.248 media gateway control pro-

tocol, which enables any H.248-compliant

third-party softswitch to control a media gate-

way. While the softswitch manages call control

interactions, the SN10200 handles transmis-

sion of call media as well as any

required transcoding.

Media handling

Service providers will use one or more

codecs on their VoIP networks according to

their desire to save bandwidth, to provide a

certain level of voice quality, or simply to

interoperate with other VoIP devices or

providers. The ability to support multiple dif-

ferent concurrent codecs and to allocate them

in real time based on traffic is the key to deliv-

ering true network convergence.

SmartNode 10200 gateways feature extensive

support for various wireline, mobile and IP

telephony audio formats, delivering seamless

transcoding in real-time. The media gateways

ship with support for G.711, G723.1, G.726,

and G.729ab right out of the box, with no

additional license fee required. They also offer

optional support for mobile and IP vocoders

such as AMR, AMR-WB (G.722.2), GSMFR/

GSM-EFR, EVRC/QCELP, G.728, G.729eg,

and iLBC. SN10200 gateways offer independ-

ent dynamic codec selection per channel.

This means that it is possible to assign differ-

ent vocoders to different channels, on a chan-

nelby- channel basis. The devices can then

run all of these codecs concurrently and do

so with no impact on system performance.

SN10200 gateways also provide unparalleled

support for Internet-based fax, also known as

Fax over IP or Fax relay, using the T.38 proto-

col, which is used to carry fax communica-

tions over an IP network. (They also support

the T.30 protocol for fax over the PSTN.)

System density

SN10200 gateways feature the industry’s high-

est system density in a 2U form factor. Beside

the capital savings achieved by purchasing

less units of equipment, system density also

provides operational cost savings in the form

of reduced co-location fees as well as lower

power and cooling costs.

Energy efficiency

For many, if not most, service providers, the

payoff from reducing energy use can be par-

ticularly impressive; typically, for every watt

of power required to operate a device, anoth-

er watt is required to cool it. The SN10200

media gateways can play a major role in

reducing energy costs, with an average

twothirds less power consumption than com-

peting products of similar capacity.

Provisioning and maintenance

For network convergence efforts to contribute

positively to revenue and profitability, service

providers must maintain their reputation for

uptime and availability during the introduc-

tion, operation, and maintenance of new serv-

ices. The SN10200 offers OAM&P, an opera-

tions, administration, maintenance, provi-

sioning (OAM&P) solution. OAM&P enables

the service provider to perform the initial

setup of the SN10200 media gateway and any

subsequent maintenance operations. These

range from the simple, such as the collection

of statistics and alarms, to the more complex,

such as system configuration changes, the

addition of new hardware or software compo-

nents, and the application of software patches

or software upgrades.

In the Enterprise market, SmartNode now offers a solution to the large

Enterprise. We are substantially increasing TDM/digital port density to

be the best and most reliable high-density Media Gateway going from

512 up to 2048 VoIP calls. Now SmartNode offers from 1 analog port

to up to 64 T1/E1 or 3 DS3 in a single box. The SmartNode 10200 is

a key component for business trunking, call center, and transcoding

solutions for the Enterprise.

Enterprise Application

In the Carrier market, the SmartNode has become a preferred advanced CPE and the SmartNode

10200 expands the portfolio with a high traffic CPE.

In addition, the SmartNode 10200 expands our reach onto the Carrier as the Media Gateway is a key

component for applications at the Carrier operational level as well as in connecting advanced value-

added services.

Carrier Applications

Product specificaties

Merk:	Patton
Categorie:	Niet gecategoriseerd
Model:	SN10200A/1DS3BU/RUI
LED-indicatoren:	Ja
Stemcodecs:	G.168,G.711,G.722.2,G.723.1,G.726,G.728,G.729,G.729ab
Aantal Ethernet LAN (RJ-45)-poorten:	2
Certificering:	UL/CSA 60950, CSA C22.2, FCC Part 15:2009, EN55022:2006, EM60950, EN61000, ETS 300 386
Netvoeding:	138 W
Ingangsspanning:	90 - 260 V
Ethernet LAN, data-overdrachtsnelheden:	100,1000 Mbit/s
Temperatuur bij opslag:	-10 - 75 °C
Frequentie:	47 - 63 Hz
Web-gebaseerd management:	Ja
Luchtvochtigheid bij opslag:	0 - 95 procent
Bedrijfstemperatuur (T-T):	0 - 55 °C
Relatieve vochtigheid in bedrijf (V-V):	0 - 95 procent