Panduit WMPFSE-E Handleiding

Panduit Niet gecategoriseerd WMPFSE-E

Lees hieronder de 📖 handleiding in het Nederlandse voor Panduit WMPFSE-E (1 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 24 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/1

For Worldwide Subsidiaries

and Sales Offices visit

Web Site: www.panduit.com

INSTRUCTIONS CM282C

Technical Support Phone: 866-405-6654

Fax: 708-444-6993

E-mail: ncginfo@panduit.com

Page 1 of 1

Cable Capacity

Part Number UTP Cable

.187 dia.

SeTP Cable

.250 dia. Fiber

3mm dia.

Method 1

Method 2

WMP1E

WMPF1E

WMPFSE

WMPH2E

WMPHF2E

WMPLFSE

WMPLSE

WMPSE

96 72 312

72 48 192

48 32 144

24 16 72

Flange

The PatchLink cable manager is recommended for use with Panduit 24 or 48 port patch panels mounted above and below the manager.

When routing the cables for the patch panels, either of the following two methods are recommended to help maintain cable bend radius.

METHOD 1:For each row of 24 ports, place two cables in each slot on the manager.

Route half the cables through each of the wire retainers on the ends of the manager.

METHOD 2: If the cables are coming from one side of the rack, place 2 cables in each of the slots on the manager.

Wire

Retainer

Wire

Retainer

METHOD 1

METHOD 2

19” Rack

Screws

Finger

WMP1E (shown)

Cover

Part Numbers: WMP1E, WMPF1E,WMPFSE, WMPH2E, WMPHF2E, WMPLFSE,

WMPLSE, WMPSE

WMP1E

WMPF1E

WMPFSE

WMPH2E

WMPHF2E

WMPLFSE

WMPLSE

WMPSE

The hinged cover opens from the top or the

bottom. Pull flange to open and close cover.

P LATCH INK

Cable Management Horizontal Panels

Install the managers to the rack with the #12-24x.5 or M6 screws provided. Built-in

screw retention in mounting holes secures screws in manager during installation.

Install the covers to the manager by positioning cover flat against the front of the

manager fingers, then push to snap in place.

Note: The recommended assembly torque shall be 9+/-1 in-lb for #12-24 screws,

1+/-0.1 N-m for M6 screws.

NOTE: When using front and back WMPH’s to manage cables on the rear of the rack, place 2 cables in each of the 12 slots in the rear of

the manager, for each row of 24 ports.

Product specificaties

Merk:	Panduit
Categorie:	Niet gecategoriseerd
Model:	WMPFSE-E
Kleur van het product:	Zwart
Breedte:	482.6 mm
Diepte:	93.7 mm
Hoogte:	44.1 mm
Duurzaamheidscertificaten:	RoHS
Aantal per verpakking:	20 stuk(s)
Maat:	19 "
Rackcapaciteit:	1U