Panduit CDE3 Handleiding

Panduit Niet gecategoriseerd CDE3

Lees hieronder de 📖 handleiding in het Nederlandse voor Panduit CDE3 (6 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 6 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/6

For Technical Support: www.panduit.com/resources/install_maintain.asp

INSTALLATION INSTRUCTIONS

Page 1 of 6

Component Guide

TOOL LIST

#2 Philliips Screwdriver

5/16” Socket Wrench

3/8” Socket Wrench

1/4” Socket Driver

(1) Hardware Kit

(not shown)

(1) Switch Support Bracket

CDE3

(installed in Net-Access

Server Cabinet)

Modular ToR Switch Inlet Duct

(CDE3)

Cisco Nexus 3900 Series Switch

(reference)

(2) Chassis Side Bracket

(1) Switch Ducting

(with hinged perforated door)

For Technical Support: www.panduit.com/resources/install_maintain.asp

INSTALLATION INSTRUCTIONS

Page 2 of 6

Determine Location of Switch Ducting and Switch Support Bracket

NOTES: Front to back span of equipment rails may need to be adjusted to accomodate your switch. Front to rear rail spacing

requirements range from 24.0" TO 30.5". Equipment installed directly below CDE3 may impede routing of switch power cord if installed

prior to CDE3.

Switch Ducting and Switch Support Bracket components of CDE3 require (4) rack spaces for installation. Switch Ducting and Switch Sup-

port Bracket are to be installed at the same vertical rack position. CDE3 components are to be installed prior to switch installation and are

designed to support the switch. (CDE3 ducting system

ONLY requires use of primary Cisco rack mount brackets. Cisco supplied switch

cradle or extension brackets are not compatible with CDE3.)

Grounding Cage Nut

(green)

Cage Nut

(installed)

Intended

Mounting

Location

(4 rack spaces)

3 RU Switch

(reference; port side of

switch faces Hot Aisle)

Install Cage Nuts

Insert (3) cage nuts per Front and Rear equipment rail at CDE3 component mounting locations (12 total cage nuts are to be installed). (1)

grounding cage nut (green) must be installed in (1) Front and (1) Rear equipment rail opposite each other on Left or Right Hand side. The

view below depicts cage nut locations for front and rear equipment rails on Left Hand Side of Cabinet

Switch Ducting

Switch Support Bracket

Intended

Mounting

Location

(4 rack spaces)

Intended Mounting Location

(4 rack spaces)

Perforated Door of Switch Ducting

(faces Cold Aisle)

FRONT OF

CABINET

REAR OF

CABINET

FRONT OF

CABINET REAR OF

CABINET

For Technical Support: www.panduit.com/resources/install_maintain.asp

INSTALLATION INSTRUCTIONS

Page 3 of 6

Install Switch Ducting

Position Switch Ducting so that the perforated door of ducting faces the cold aisle and the mounting holes of Switch Ducting align with cage

nuts in equipment rails . Secure Switch Ducting to equipment rails using (5) #12-24 Phillips screw, (5) #12 External (installed on page 2)

Tooth Washers and (1) hex head grounding screw on front rail. Ensure that hex head grounding screws (green; use 5/16” socket wrench)

fasten into grounding cage nuts.

(1) #12-24 Hex Head

Grounding Screws

(use 5/16” socket wrench)

Switch Ducting

Perforated Door of Switch Ducting

(faces Cold Aisle)

Install Switch Support Bracket

Position Switch Support Bracket so that the mounting holes of Switch Support Bracket align with cage nuts in equipment rails (installed on

page 2). Secure Switch Support Bracket to Rear equipment rails using (5) #12-24 Phillips screw, (5) #12 External Tooth Washers. (1) hex

head grounding screw on rear rail. Ensure that hex head grounding screws fasten into grounding cage (green; use 5/16” socket wrench)

nuts.

Grounding Cage Nut

(green)

Cage Nuts

(installed)

(5) #12-24 Phillips Screws

(1) #12-24 Hex Head

Grounding Screws

(use 5/16” socket wrench)

Cage Nuts

(installed)

Grounding Cage Nut

(green)

Switch Support

Bracket

FRONT OF

CABINET REAR OF

CABINET

FRONT OF

CABINET

(5) #12 External Tooth Washers

(5) #12-24 Phillips Screws

(5) #12 External Tooth Washers

Product specificaties

Merk:	Panduit
Categorie:	Niet gecategoriseerd
Model:	CDE3
Kleur van het product:	Zwart
Breedte:	482.6 mm
Diepte:	750.4 mm
Hoogte:	155.7 mm
Materiaal behuizing:	Staal