Panduit WBH6E Handleiding

Panduit Niet gecategoriseerd WBH6E

Lees hieronder de 📖 handleiding in het Nederlandse voor Panduit WBH6E (1 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 28 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/1

INSTALLATION INSTRUCTIONS

NETWORK CONNECTIVITY GROUP

WORLDWIDE SUSIDIARIES AND SALES OFFICES

412 Rockwell Court

Burr Ridge, Illinois 60521

Technical Support: 866-405-6654

Fax: 708-444-6993

E-mail: netconnsupport@panduit.com

Web site: www.panduit.com/ncg

Page 1 of 1

CM23A

HINGED WALL MOUNT BRACKET

PART NUMBERS: WBH1, WBH2, WBH3, WBH4,

WBH2E, WBH4E, WBH6E

TO MOUNT BRACKET TO WALL OR 19” RACK:

1. Determine desired wall or rack mounting location.

2. Insert appropriate hardware (screws not included) through keyways in rear of bracket and

fasten securely to wall, or insert through round holes and fasten securely to rack..

3. Hinged bracket is removable so that equipment can hinge open on either side.

TO INSTALL EQUIPMENT ON BRACKET:

1. Determine desired mounting location for equipment.

2. Align equipment on bracket.

3. Insert #12-24 screws (not included) into equipment and screw into mounting bracket holes

on either side .

4. To access back of equipment, remove L-bracket screws.

NOTE: WBHE models are packaged without hinges or L-brackets installed. Mount hinges

and L-brackets on the outside of the Main Bracket as shown, using the supplied #12-24

screws and pem nuts.Make certain the pem nuts are facing the back of the Main Bracket.

L-Bracket for

quick access to

back of panels

Back opening for in wall

cable access

Main BracketHinged Bracket

Hinged Bracket

Screws

Cable Tie

or Tak-Ty

slots

Product specificaties

Merk:	Panduit
Categorie:	Niet gecategoriseerd
Model:	WBH6E
Kleur van het product:	Zwart
Breedte:	513 mm
Diepte:	401 mm
Hoogte:	267 mm
Maximale gewichtscapaciteit:	27.2 kg
Duurzaamheidscertificaten:	RoHS
Maat:	19 "
Producten per pallet:	1 stuk(s)
Rackcapaciteit:	6U