Panduit Scanner RPDSCN Handleiding

Panduit Scanner Scanner RPDSCN

Lees hieronder de đź“– handleiding in het Nederlandse voor Panduit Scanner RPDSCN (7 pagina's) in de categorie Scanner. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/7
For Technical Support: www.panduit.com/resources/install_maintain.asp
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2021 PN657
: Display;
Display scanner’s Working mode, Power,
Time, Barcode content, etc.
: Scan button;
: Boot button;
: Back to home;
: Menu button;
: Long press to enter menu;
: OK button;
When you select the function you want
to set, press this button to confirm.
: Long press for 2 seconds to shut down.
: Indicator light;
RapidID Scanner Quick Start Guide
Part Number: RPDSCN
Page 1 of 7
1.
2.
4.
3.
5.
1.
2.
3.
4.
5.
RapidID cable identification system requires the following three components:
• Panduit RapidID copper & fiber patch cords
• Panduit barcode scanner (RPDSCN)
• Apple or Android tablet running RapidID software
Confirm Scanner
in BLE mode
Using the Panduit Barcode Scanner (RPDSCN),
Scan barcode below to enter BLE mode.
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2021 PN657INSTALLATION INSTRUCTIONS
For Technical Support: www.panduit.com/resources/install_maintain.asp
Page 2 of 7
* Bluetooth BLE mode devices connect in software operates differently than traditional Bluetooth HID
devices which uses the tablet OS Bluetooth settings to configure and pair. BLE devices only require
Bluetooth to be enabled in the tablet OS Bluetooth settings but will pair using the RapidID software
settings.
IMPORTANT BLUETOOTH BLE SETUP INFORMATION
"BleManagerState" will display "PoweredOn" if the tablet OS’s Bluetooth services are functioning
properly and listening for BLE devices. If not make sure Bluetooth is enabled in tablet OS Bluetooth
settings.
Home Page
Settings Page
• Starting at the "Home" page, go to "Settings",
• On the Settings page, under "Select Barcode Scanner (BLE)", pressing "<Unspecified>" will bring up the
BLE scanner configuration page.
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2021 PN657INSTALLATION INSTRUCTIONS
For Technical Support: www.panduit.com/resources/install_maintain.asp
Page 3 of 7
Click “Scan Now” to search for your BLE scanner (Verify your scanner is turned on and in BLE
mode) then select your scanner. The scanner will appear as “Scanner XXX” with XXX being the
number at the top of the Scanners display.
Once connected the RapidID software will display the name of your scanner in the top right corner
and will automatically attempt to connect to the previously used scanner.
You are now ready to scan barcodes in Capture and Match modes.
Connecting BLE Scanner (cont’d)
Scanner Setup Page
Confirm the scanner # on the web,
matches the # on the scanner
Scanner Setup Page


Product specificaties

Merk: Panduit
Categorie: Scanner
Model: Scanner RPDSCN

Heb je hulp nodig?

Als je hulp nodig hebt met Panduit Scanner RPDSCN stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Scanner Panduit

Handleiding Scanner

Nieuwste handleidingen voor Scanner