Panduit PED10B1 Handleiding

Panduit Niet gecategoriseerd PED10B1

Lees hieronder de 📖 handleiding in het Nederlandse voor Panduit PED10B1 (6 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 16 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/6

FOR TECHNICAL SUPPORT www.panduit.com/resources/install_maintain.asp

INSTRUCTIONS CM592A

Door

Part Number Single Sided Dual Sided

PED6B1 PEVF6 PEV6

PED8B1 PEVF8 PEV8

PED10B1 PEVF10 PEV10

PED12B1 PEVF12 PEV12

Corresponding Vertical Manager

Page 1 of 5

PatchRunnerTM High Capacity Vertical Doors

Part Numbers: PED6B1, PED8B1, PED10B1, PED12B1, PED696B1, PED896B1,

PED1096B1, PED1296B1

Installation Instructions-Mounting Door to PEV Manager-

Step 3: Ensure that both handles are in the

disengaged position.

Handles

disengaged

Step 4: Set door onto ends of door bracket located

on the bottom of the manager. Then ensure that

activation tabs on the door bracket fit into windows

on the door.

Activation Tabs

Windows on door

Step 5: Fit activation tabs located on the top door

bracket into the windows located on top of the door.

Activation Tabs

Windows on door

Handles engaged

Step 6: Grasp fingers of manager with fingers and

apply thumb to door face. Then squeeze together

until handles pop into engaged position.

Step 1: Using a flat object, remove the grommets

from the rear of the door. The door brackets can

now be installed.

Door brackets

Remove grommets

Bottom of manager

Top of manager #12-24 Screws

Step 2: Install door brackets to manager as shown

using #12-24 screws Tighten screws to 15 in-lbs.

7FT Sizes

For Technical Support: www.panduit.com/resources/install_maintain.asp

INSTRUCTIONS CM592A

Installation Instructions-Mounting Door to PRV Manager-7ft Sizes

Door

Part Number Single Sided Dual Sided

PED6B1 PRVF6 PRV6

PED8B1 PRVF8 PRV8

PED10B1 PRVF10 PRV10

PED12B1 PRVF12 PRV12

Corresponding Vertical Manager

Step 1: Using a flat object, remove the grommets

from the rear of the door. The door brackets can

now be installed.

Door brackets

Remove grommets

Bottom of manager

Top of manager

#12-24 Screws

Step 2: Install door brackets to manager as shown

using #12-24 screws. Use holes closest to the front

of the manager. Tighten screws to 15 in-lbs.

Top Bracket

#12-24 Screws

Bottom Bracket

Outer holes

Step 3: Ensure that both handles are in the

disengaged position.

Handles

disengaged

Step 4: Set door onto ends of door bracket located

on the bottom of the manager. Then ensure that

activation tabs on the door bracket fit into windows

on the door.

Activation Tabs

Windows on door

Step 5: Fit activation tabs located on the top door

bracket into the windows located on top of the door.

Activation Tabs

Windows on door

Handles engaged

Step 6: Grasp fingers of manager with fingers and

apply thumb to door face. Then squeeze together

until handles pop into engaged position.

Page 2 of 5

For Technical Support: www.panduit.com/resources/install_maintain.asp

INSTRUCTIONS CM592A

Installation Instructions-Mounting Door to PEV Manager-8ft Sizes

PED696B1 PEVF696 PEV696

PED896B1 PEVF896 PEV896

PED1096B1 PEVF1096 PEV1096

PED1296B1 PEVF1296 PEV1296

Door

Part Number Single Sided Dual Sided

Corresponding Vertical Manager

Step 3: Ensure that both handles are in the

disengaged position.

Handles

disengaged

Step 4: Set door onto ends of door bracket located

on the bottom of the manager. Then ensure that

activation tabs on the door bracket fit into windows

on the door.

Activation Tabs

Windows on door

Step 5: Fit activation tabs located on the top door

bracket into the windows located on top of the door.

Activation Tabs

Windows on door

Handles engaged

Step 6: Grasp fingers of manager with fingers and

apply thumb to door face. Then squeeze together

until handles pop into engaged position.

Page 3 of 5

Step 1: Remove all brackets from the door. Identify

proper brackets for application and discard others.

Brackets used for mounting

to PRV Manager

No mark

Step 2: Install door brackets to manager as shown

using #12-24 screws. Use common brackets with “D”

cutout on the tongue. Tighten screws to 15 in-lbs.

Bottom of manager

Top of manager

#12-24 Screws

Common Bracket

with “D”

#12-24 Screws

Common Bracket

with “D”

Bottom bracketTop Bracket

Diamond

Bracket used for mounting

to PEV Manager (2 places)

Common Bracket

with “D”

“D” Shape

Product specificaties

Merk:	Panduit
Categorie:	Niet gecategoriseerd
Model:	PED10B1
Kleur van het product:	Zwart
Breedte:	257 mm
Diepte:	38 mm
Hoogte:	2104 mm
Materiaal behuizing:	Staal
Duurzaamheidscertificaten:	RoHS
Compatibiliteit:	PatchRunner
Rackcapaciteit:	45U