Panduit FXTRL8NUFSNM008 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Panduit FXTRL8NUFSNM008 (2 pagina's) in de categorie cables para ordenadores y periféricos. Deze handleiding was nuttig voor 37 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
For Technical Support: www.panduit.com/resources/install_maintain.asp
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2013 FS046A
Page 1 of 2
Tak-Ty Option
Ta k-Ty
Slot features in the cable transition allows for the use of a Tak-Ty
to either secure the cable harness to a rack feature, such as
cable management fingers, or to more robustly secure multiple
cable transitions that are interlocked together.
PanMPO to LC Uniboot
Cable Harness (Hydra)
3.0mm round cable clips
3.0mm round cable
Housing ribs
(Transitions interlocked)
(Cable secured in clip)
Cable management example
Cable Clips & Housing Ribs Option
Cable Transition Usage
LC Uniboot PanMPO
Connectors Connector
Cable transition
E-mail:
techsupport@panduit.com
Phone:
866-405-6654
For Instructions in Local Languages
and Technical Support:
www.panduit.com/resources/install_maintain.asp
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2013 FS046A
www.panduit.com
Page 2 of 2
LC Uniboot Polarity Changeover - Pair Flipping
1
2
3
4
Squeeze both sides of the LC Uniboot cover evenly and
pull back to disengage the tab on the opposite side.
Slide the LC Uniboot cover back away from connectors and
rotate 180°.
Rotate each LC connector downward 180°. Re-install the LC Uniboot cover until you hear an audible click.
PanMPO Gender Changeover
Squeeze both sides of the outer housing at the back end evenly
until you hear an audible click. Pull off connector to remove.
Locate hole in the inner housing on the slotted side and position
pin retraction tool over the hole.
Insert tool into hole, press down gently, and push backward to
retract connector pins to the female state. Repeat process in
opposite direction to extract pins for male state.
Re-install the outer housing. Ensure the key is in the proper
orientation. See PanMPO polarity changeover instructions on
page 2 of FS041* for more details.
4
3Female = Pins retracted
Pins
retracted
Gently
CAUTION! Only Panduit tool is to be
used for gender change. Use of any
other tool can cause fiber damage and
will void the product warranty.
Pin retraction
tool
Hole
2
Pins
extracted
1
Outer
housing
Male = Pins extracted
*Denotes instruction sheet revision letter.


Product specificaties

Merk: Panduit
Categorie: cables para ordenadores y periféricos
Model: FXTRL8NUFSNM008
Color del producto: Color aguamarina
Temperatura de operación (T-T): 0 - 60
Certificados de sustentabilidad: RoHS
Certificación: ISO/IEC 11801\nTIA/EIA-568-C.3\nTIA-604-5 (FOCIS-5)\nTIA/EIA-604-10 (FOCIS-10)\nTIA/EIA-568-C.1
Cantidad por paquete: 1 piezas
Conector 2: 12x LC
Conector 1: PanMPO
Tipo de fibra óptica: OM3
Bidireccional completo: Y
Diámetro del núcleo: 50
Diámetro del revestimiento: 125
Material del forro: Libre de halógenos y baja emisón de humo (LSZH)
Longitud de cable: 8
Género del conector 2: Macho
Género del conector 1: Macho
No contiene: Halógeno
Temperatura de almacenamiento (T-T): -40 - 70
Diámetro del cable: 3

Heb je hulp nodig?

Als je hulp nodig hebt met Panduit FXTRL8NUFSNM008 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding cables para ordenadores y periféricos Panduit

Andere handleidingen Panduit