Panduit EF001 Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor Panduit EF001 (2 pagina's) in de categorie USB Hub. Deze handleiding was nuttig voor 8 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/2
Customer Service: CS@panduit.com 800.777.3300
Technical Support: techsupport@panduit.com 866.405.6654
page 1
I N S T A L L A T I O N G U I D E
Sensor Hub (EF001)
Sensor Hub allows for 3 additional sensor ports to be added to iPDU. Two (2) Sensor Hubs can be installed
with a PDU allowing for 8 sensor measurements.
Environmental sensors are engineered with an embedded microchip that
converts analog signals to digital format before data travels to the PDU,
providing greater data accuracy. This smart design also enables easy plug &
play installation that takes just moments to complete.
The Sensor Hub allows for up to 8 environmental factors to be measured
and monitored per PDU to allow for greater eciency and favorable
operating conditions.
SPECIFICATION
Electrical
Requirement
Operational voltage
5V DC
Range
0 to 4m/s
Accuracy
± °5% (25 FS C characteristic)
Physical
Wire Length
3 m
Wire Type
CAT.5E Patch Cable, UTP
Environmental
Temperature (Operating/Storage)
0°C~+60°C (32 ~ 140°F)/-20~ + 70°C (-4 ~ 158°F)
Humidity (Operating/Storage)
35% to 85% non RH, -condensing
Compliance
Environmental Verication
ROHS, WEEE
SENSOR INVENTORY
Customer Service: CS@panduit.com 800.777.3300
Technical Support: techsupport@panduit.com 866.405.6654
page 2
I N S T A L L A T I O N G U I D E
INSTALLATION INSTRUCTIONS
1. Plug a standard Ethernet cord into either Sensor-1 or Sensor-2 port on the iPDU.
Note: A iPDU can identify and measure up to 6 sensors, while the Sensor Hub can connect up to 3
sensors, each. If using two (2) Sensor Hubs on one (1) iPDU, connect the rst sensor Hub to the Sensor-
1 port on the iPDU. Connect the second Sensor Hub to the Sens -2 port on the iPDU. or
2. Plug the other end of the Ethernet cord into a port location on the Sensor Hub.
3. Plug additional environmental sensor cables into the remaining ports on the Sensor Hub.
4. Use double-sided tape and/or cable ties to secure the Sensor Hub. The Sensor Hub can be attached to
the inside or outside of the rack, per user preference.
• The sensor hub is now installed and ready for use. For more information, contact your regional sales
oce or go to web.
Product specificaties
| Merk: | Panduit |
| Categorie: | USB Hub |
| Model: | EF001 |
Heb je hulp nodig?
Als je hulp nodig hebt met Panduit EF001 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding USB Hub Panduit
9 December 2024
Handleiding USB Hub
- USB Hub Sony
- USB Hub Medion
- USB Hub Anker
- USB Hub Belkin
- USB Hub BML
- USB Hub Digitus
- USB Hub Ednet
- USB Hub Ewent
- USB Hub Gembird
- USB Hub Goobay
- USB Hub Hama
- USB Hub Icy Box
- USB Hub Konig Electronic
- USB Hub Livoo
- USB Hub Logik
- USB Hub Logilink
- USB Hub Manhattan
- USB Hub Nedis
- USB Hub Renkforce
- USB Hub Silvercrest
- USB Hub Sitecom
- USB Hub Targus
- USB Hub Tenda
- USB Hub Terratec
- USB Hub Terris
- USB Hub TP Link
- USB Hub Trendnet
- USB Hub Vivanco
- USB Hub Xtorm
- USB Hub Andersson
- USB Hub CSL
- USB Hub NGS
- USB Hub Conceptronic
- USB Hub Biltema
- USB Hub Sven
- USB Hub Tripp Lite
- USB Hub LC-Power
- USB Hub CyberPower
- USB Hub Xcellon
- USB Hub Vaddio
- USB Hub Speed-Link
- USB Hub Vorago
- USB Hub Extron
- USB Hub AMX
- USB Hub Crestron
- USB Hub StarTech.com
- USB Hub Smart-AVI
- USB Hub Astell&Kern
- USB Hub Fun Generation
- USB Hub Cudy
- USB Hub Tams Elektronik
- USB Hub Roco
- USB Hub Salicru
- USB Hub BZBGear
- USB Hub TEKLIO
- USB Hub IOPLEE
- USB Hub Primewire
Nieuwste handleidingen voor USB Hub
13 December 2024
10 December 2024
10 December 2024
10 December 2024
4 December 2024
4 December 2024
4 December 2024
4 December 2024
4 December 2024
4 December 2024