Panduit CNWSM5-C Handleiding

Panduit Niet gecategoriseerd CNWSM5-C

Lees hieronder de 📖 handleiding in het Nederlandse voor Panduit CNWSM5-C (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 20 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

INSTRUCTIONS CM286B

FOR TECHNICAL SUPPORT CALL: 866-405-6654

Page 1 of 4

Modular Japanese Metric N FET RAME

Rack and Accessories

Part Numbers: NFR80J, NFD480, CNWSN5-C, CNWSM6-C, NFJMDRK, NFDR4X6K

NFSHLF19X18, NFSHLF19X25, NFLRB, NFEDB23

Optional Accessories

NFR80J

(8) D-rings

(16) M5

Screws

NFJMDRK

(1) Door Assembly

with Mtg. Brackets

(4) M5 Screws

NFD480

Rack Assembly

Front Top Flange

Vertical Channel

Base Angle

Step1

Lay the two vertical channels on the floor or a pair of sturdy saw

horses to ease installation.

Install (1) Base Angle and Front Top Flange on the vertical channels

using (8) M10 bolts, lockwashers and nuts provided. Do not tighten.

19” Mounting 23” Mounting

Modular Japanese Metric

NETFRAME Rack

(2) Vertical Channels

(2) Base Angles

(1) Pack of (20) M10x1.00

Bolt, Lockwasher, Nut

(1) Front Top Flange

(1) Rear Top Flange

(2) Center Waterfalls

(1) Grounding and Hardware Kit

(100) M5 Screw

(100) M5 Cage Nuts (shown)

CNWSM5-C

(100) M6 Screws”

(100) M6 Cage Nuts

CNWSM6-C

(1) Ladder

Rack Bracket

(2)3/8”-16x1” Hex Bolts

3/8”-16 Hex Nuts

3/8” Split Lockwasher

NFLRB

(1) Shelf

(4) M6 Screws

(4) #12-24 Screws

(4) #10-32 Screws

NFSHLF19x18

(shown)

NFSHLF19x25

(8) D-rings

NFDR4X6K

(1) NETFRAME

Extender Door

Brackets for 23” Mtg

(4) #10-32 Screws

NFEDB23

INSTRUCTIONS CM286B

FOR TECHNICAL SUPPORT CALL: 866-405-6654

Page 2 of 4

606.42mm

721.4mm

279.49mm

152.4mm

431.8mm

Location Guide: 19” Rack

Step 3

Stand the rack upright.Verify cage nut ports tapped holes

are EIA spaced at 18.31”, square the rack and tighten

bolts.Install the two waterfalls with the M5 screws provided.

Center Waterfall

Rear Top Flange

Base Angle

Step 2

Roll the rack on its side to install the other base angle

and rear top flange using (8) M10 bolts, lockwashers

and nuts provided. Do not tighten.

Grounding Kit

(1) Barrel Lug

(1) M6 Screw

Barrel Lug and Grounding Screw mounts to rear of rack in

one of four optional places.

Mount rack to floor using the location guide below for

mounting hole and overall size information.

INSTRUCTIONS CM286B

FOR TECHNICAL SUPPORT CALL: 866-405-6654

Page 3 of 4

NFDR4x6 Right side

installation snaps

down.

NFDR4x6 Left side

installation snaps up.

NFD480 installed to Metric N FET RAME

with (4) M5 screws provided.

Door Installation

NFEDB23

NFD480

D-rings Installation:

NFDR4X6

NFJMDRK

Install NFJMDRK at

desired height on rack

with M5 screws provided.

NFDR4X6

NFJMDRK

Cage Nuts Installation:

CNWSM5-C

CNWSM6-C

Install M5 or M6 cage nut into port

provided in rack. Install screw into

cage nut.

NFEDB23 installed to N FET RAME Top Flange with

#10-32 screws provided.To be used when rack is

set-up for 23” mounting.

Product specificaties

Merk:	Panduit
Categorie:	Niet gecategoriseerd
Model:	CNWSM5-C
Kleur van het product:	Zwart
Soort:	Schroef
Certificering:	RoHS
Materiaal:	Staal
Aantal per verpakking:	100 stuk(s)
Lengte:	15 mm
Verbinden draad-type:	M5
Diameter hoofd:	10 mm
Aantal moeren:	100
Thread diameter:	5 mm
Vorm kop:	Ronde kop