Panduit CNDDE Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Panduit CNDDE (3 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 155 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3
INSTRUCTIONS CM362
© Panduit Corp. 2008
FOR TECHNICAL SUPPORT www.panduit.com/resources/install_maintain.asp
Page 1 of 3
NET-ACCESS Dual Hinge Door Enhanced
Part Numbers: CNDDE
Dual Hinge Door Installation and Removal (CNDDE)
To install, lift door and insert lower hinge pin into the bushing in the bottom door support. Orient the door so the top hinge pin is near the top
cabinet bushing. Using a pinching action, pull the red finger handle over and down to retract the hinge pin. Release the red finger handle
when aligned with the top bushing. To remove, support the door on the open side with one hand while retracting the hinge pin with the other
hand as described above.
Upper Hinge Location
Note: For cleaning PANDUIT recommends using ‘SIMPLE GREEN’ all purpose cleaner
(or local equivalent) and a lint free cloth
Lower Hinge Location
Caution: Support the weight of
the door during removal.
INSTRUCTIONS CM362
For Technical Support: www.panduit.com/resources/install_maintain.asp
Dual Hinge Door Usage (CNDDE)
The dual hinge door has the unique ability to open on either the left or the right side. This allows full access to either side of the cabinet. For
safety, the dual hinge door events handles from turning when features an interlock system that pr either side is open. To close a handle that
is locked open, press the spring-loaded levers in the top and the bottom corners of the door and turn the handle simultaneously.
Spring Loaded Lever
Spring Loaded Lever
See note below
Note: Depress levers simultaneously to disengage handle interlock.
See note below
Fascia Installation
Remove 3 keyed knockouts and secure the fascia with the 3 screws provided
Page 2 of 3
INSTRUCTIONS CM362
For instuctions in Local Languages
and Technical Support:
www.panduit.com/resources/install_maintain.asp
E-mail:
cs@panduit.com
Fax:
(708)444-6448
www.panduit.com
Page 3 of 3
Door Adjustment (CNDDE)
The cabinet is equipped with a bottom door shoe lift bushing. The purpose of this lift bushing is to provide vertical adjustment within the
cabinet door frame and enable cabinet doors to be adjusted for a consistent fit and function.
Exploded View
Lift Screw
Bushing
Set Screw
Dual hinge door
Split Doors
Network Cabinet
Dual Hinge Door
The door shoe lift bushing allows field adjustments on the cabinet doors. Loosen the set screw and adjust the lift screw with a 3/32 allen key
wrench raising the screw lifts the door, and adjust the door's fit within the cabinet door frame.
Door adjusted by lift bushing
maintaining consistent top gaps
Corrected door fit by adjusting
opposite side lift screw.
Re-tighten set screws when
desired fit is achieved
Unleveled cabinet causing insufficient
gap between door and door shoe,
resulting in rubbing or interference
with bottom door shoe.
Raise opposite side lift screw to
correct.


Product specificaties

Merk: Panduit
Categorie: Niet gecategoriseerd
Model: CNDDE

Heb je hulp nodig?

Als je hulp nodig hebt met Panduit CNDDE stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Panduit

Panduit

Panduit EC001 Handleiding

17 November 2024
Panduit

Panduit CDE3 Handleiding

17 November 2024
Panduit

Panduit MEHT187 Handleiding

17 November 2024
Panduit

Panduit FPONE2 Handleiding

13 November 2024
Panduit

Panduit FPONE3 Handleiding

13 November 2024
Panduit

Panduit FPONE1 Handleiding

13 November 2024
Panduit

Panduit FPONE4 Handleiding

13 November 2024
Panduit

Panduit AFR4EC Handleiding

18 Oktober 2024
Panduit

Panduit AFR4RA Handleiding

18 Oktober 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd