Panasonic RX-D21GN Handleiding


Lees hieronder de πŸ“– handleiding in het Nederlandse voor Panasonic RX-D21GN (8 pagina's) in de categorie Stereosets. Deze handleiding was nuttig voor 47 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
Portable Stereo
CD System
Operating Instructions
Model No.
RX-D25
RX-D21
Note:
β€œEB” on the packaging indicates the United Kingdom.
Before connecting, operating or adjusting this
product, please read these instructions completely.
Please keep this manual for future reference.
Power sources
Memory back-up
During power supply interruption, memory back-
up batteries (not included) save CD programs and
radio stations you have set.
These batteries do not power the unit.
(R6/LR6, AA, UM-3)
When to change the batteries
The batteries last about a year.
Connect the unit to AC power before replacing
the batteries.
β€’ Before connecting or disconnecting the AC
mains lead, stop the tape and switch
[ ] to β€œTAPE/ ” to turn the unit off.
The memory batteries are worn out faster if
the cord is disconnected with the power still
on.
Removing the batteries
Press the negative end of the number 4 battery
and remove the batteries. (Remove the power
batteries first.)
Using a household AC outlet
FOR UNITED KINGDOM ONLY
READ THE CAUTION FOR THE AC MAINS
LEAD ON PAGE 7 BEFORE CONNECTION.
Connect the AC mains lead firmly to the unit and
the outlet.
Note
β€’ The included AC mains lead is for use with
this unit only. Do not use it with other
equipment.
β€’ The function selector switch does not separate
entire unit from mains even if in β€œTAPE/ ”
position.
Using batteries (not included)
The unit cannot be powered by batteries if the
AC mains lead is connected.
(R20/LR20, D, UM-1)
When to change the batteries
Sound quality and operations are affected when
the batteries are running low. Replace all six
batteries. It is also a good idea to replace all the
batteries before recording.
Removing the batteries
Open the battery cover
and insert your finger in
the hole on the bottom
of the unit and push out.
RQT6744-B
To household AC outlet
AC mains lead
(included)
Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions
carefully.
These operating instructions fundamentally explain the operation of
RX-D25.
Supplied accessories
Please check and identify the supplied accessories.
Use numbers indicated in parentheses when asking for replacement
parts.
AC mains lead .......................................................................... 1pc.
For United Kingdom: (RJA0053-2X)
For Australia and New Zealand: (RJA0035-X)
For others: (RJA0019-2K)
Remote control transmitter RX-D25 only ............................. 1pc.
(EUR648258)
The illustrations show RX-D25.
EB GNE
Inner row
Outer row
For the United Kingdom and Republic of Ireland
www.panasonic.co.uk (for UK customers only)
β€’ Order accessory and consumable items for your product with ease and
confidence by telephoning our Customer Care Centre Mon–Friday 9:00 am–
5:30 pm.
(Excluding public holidays.)
β€’ Or go on line through our Internet Accessory ordering application.
β€’ Most major credit and debit cards accepted.
β€’ All enquiries transactions and distribution facilities are provided directly by
Panasonic UK Ltd.
β€’ It couldn’t be simpler!
Customer Care Centre
For UK customers: 08705 357357
For Republic of Ireland customers: 01 289 8333
Technical Support
For UK customers: 0870 1 505610
This Technical Support Hot Line number is for Panasonic PC software
related products only.
For Republic of Ireland, please use the Customer Care Centre number
listed above for all enquiries.
For all other product related enquiries, please use the Customer Care
Centre numbers listed above.
shop@
RQT6744
2
These speakers do not have magnetic shielding. Do not place
them near televisions, personal computers or other devices
easily influenced by magnetism.
FM mode select/CD stop
/program clear button
( FM MODE/CLEAR)
RX-D25 only
RX-D25
RX-D21
TUNER
H.E.S. XBS
CD
Main unit:
/CLEAR
/
–/ /+
/
RX-D25 only
Remote control RX-D25 only :
The functions of the buttons without descriptions are the same as on
the main unit.
Battery installation
Insert the batteries (not included)
observing the correct polarities (e d, ).
Operation notes
β€’Do not place obstacles between the remote control signal sensor and
the remote control unit.
β€’Do not expose the remote control signal sensor to direct sunlight or to
the bright light of fluorescent light.
β€’Take care to keep the remote control signal sensor and end of the remote
control unit free from dust.
To prevent damage
β€’Never place heavy items on it.
β€’Do not disassemble or reconstruct it.
β€’Do not spill water or other liquids into it.
Correct method of use
Concerning the remote control
Transmission
window
About 7 meters in front
of the signal sensor
Remote control
signal sensor
1
2
R6, AA, UM-3
RX-D25 only
Controls
RQT6744
3
1 Switch [ ] to β€œTUNER”.
(Unit comes on.)
2Press [BAND] to select β€œFM” or β€œAM”.
3(Omit this step if using the remote control)
If β€œ ” is on the display, press
[TUNE MODE] to clear it off.
4Press [–/ ] or [ /+] tog f
tune to the desired station.
The frequency changes one step
each time a button is pressed.
Automatic tuning
Keep [–/
g f] or [ /+] depressed and release when the frequency
display starts to change. A station with good reception is automati-
cally selected and the process stops.
To stop automatic tuning, press [–/
g f] or [ /+] again.
Note
Automatic tuning may stop on a frequency where there is no station if
there is interference. Press [–/
g f] and [ /+] to tune if this occurs.
5Adjust the volume.
To use auto scan
You can search for a station by listening to all tuned-in stations for 8
seconds each.
Preparation: Switch [ ] to β€œTUNER”.
1. Press [BAND] to select β€œFM” or β€œAM”.
2. Press [AUTO SCAN].
Auto scan starts.
3. Press [AUTO SCAN] when you find the desired station.
Auto scan ends when it reaches the original frequency again.
To stop during the process, press [AUTO SCAN].
To improve reception
FM: Extend the whip antenna and adjust its direction.
AM: Adjust facing of the unit.
If noise is excessive in the FM stereo mode
Press [FM MODE]. (β€œ ” lights up.)
Sound will be produced in monaural, but this also reduces noise.
Press the button again to cancel. (β€œ ” goes out.)
Preset the stations (twelve FM and twelve AM) to make tuning simpler.
Preparation: Tune to the desired station.
(Do steps on the left.)1 4–
1Press [MEMORY].
2 While β€œ ” and the frequency are
flashing
Press [MEMORY].
3 While β€œ ” and the preset channel
are flashing
Press [–/ ] or [ /+] tog f
select the desired channel.
(Remote control: [4444
4] or [3333
3])
4Press [MEMORY].
(This completes presetting.)
Repeat the above to preset other stations.
Note
If β€œ ” goes off during presetting, return to step 1.
Press [BAND] to select β€œFM” or β€œAM”.
(Omit this step if using the remote control)
Press [TUNE MODE] to display
β€œ ”.
Press [–/
g f] or [ /+] to select
the desired channel (1–12).
(Remote control: [4444
4] or [3333
3])
To use preset scan
You can search for a station by listening to all preset channels for 8
seconds each.
1. Do steps to above.
For remote control, replace [– /
g f] or [ /+] described below with [44
44
4]
or [
33
33
3].
2. Press and hold [–/
g f] or [ /+] until β€œPS” appears on the display.
3. Press [–/
g f] or [ /+] when you find the desired channel.
Preset scan ends after searching through each preset channel once.
To stop during the process, press [–/
g f] or [ /+].
Normal tuning Preset tuning
The Radio
To listen to preset channels
How to preset
Indicates
auto scan
Indicates
preset scan
β€œ ” lights when an FM stereo
broadcast is being received.
Preset channel
Preset channel
3
2
1 5 4
12 3
1 2 4 3


Product specificaties

Merk: Panasonic
Categorie: Stereosets
Model: RX-D21GN

Heb je hulp nodig?

Als je hulp nodig hebt met Panasonic RX-D21GN stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Stereosets Panasonic

Handleiding Stereosets

Nieuwste handleidingen voor Stereosets