Panasonic SC-PM250EB Handleiding

Panasonic Stereosets SC-PM250EB

Lees hieronder de 📖 handleiding in het Nederlandse voor Panasonic SC-PM250EB (2 pagina's) in de categorie Stereosets. Deze handleiding was nuttig voor 39 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Panasonic Corporation

Web Site: http://www.panasonic.com

Operating Instructions

CD Stereo System

Model No. SC-PM250B

Thank you for purchasing this product.

For optimum performance and safety, please read these instructions carefully.

Please keep this manual for future reference.

“EB” indicates the United Kingdom model.

RQT0A08-B

L0215CH0

Manufactured by:

Importer for Europe:

Panasonic Corporation

Kadoma, Osaka, Japan

Panasonic Marketing Europe GmbH

Panasonic Testing Centre

Winsbergring 15, 22525 Hamburg, Germany

Your system and the illustrations can look differently.

These operating instructions are applicable to the

following system.

Back of product

Safety precautions

WARNING!

Unit

• To reduce the risk of fire, electric shock or product

damage,

– Do not expose this unit to rain, moisture, dripping or

splashing.

– Do not place objects filled with liquids, such as vases,

on this unit.

– Use only the recommended accessories.

– Do not remove covers.

– Do not repair this unit by yourself. Refer servicing to

qualified service personnel.

– Do not let metal objects fall inside this unit.

CAUTION!

Unit

• To reduce the risk of fire, electric shock or product

damage,

– Do not install or place this unit in a bookcase, built-in

cabinet or in another confined space. Ensure this unit

is well ventilated.

– Do not obstruct this unit’s ventilation openings with

newspapers, tablecloths, curtains, and similar items.

– Do not place sources of naked flames, such as

lighted candles, on this unit.

• This unit is intended for use in moderate climates.

• This unit may receive radio interference caused by

mobile telephones during use. If such interference

occurs, please increase separation between this unit

and the mobile telephone.

• This unit utilizes a laser. Use of controls or adjustments

or performance of procedures other than those

specified herein may result in hazardous radiation

exposure.

AC mains lead

• The mains plug is the disconnecting device. Install this

unit so that the mains plug can be unplugged from the

socket outlet immediately.

Battery

• Danger of explosion if battery is incorrectly replaced.

Replace only with the type recommended by the

manufacturer.

• When disposing of the batteries, please contact your

local authorities or dealer and ask for the correct

method of disposal.

• Do not heat or expose to flame.

• Do not leave the battery(ies) in a car exposed to direct

sunlight for a long period of time with doors and

windows closed.

• Do not break open or short-circuit the battery.

• Do not charge the alkaline or manganese battery.

• Do not use the battery if the cover has peeled off.

• Remove the battery if you do not use the remote control

for a long period of time. Keep in a cool, dark area.

System SC-PM250B

Main unit SA-PM250B

Speakers SB-PM02

Disposal of Old Equipment and Batteries

Only for European Union and countries with recycling

systems

These symbols on the products, packaging,

and/or accompanying documents mean that

used electrical and electronic products and

batteries must not be mixed with general

household waste.

For proper treatment, recovery and recycling

of old products and used batteries, please

take them to applicable collection points in

accordance with your national legislation.

By disposing of them correctly, you will help

to save valuable resources and prevent any

potential negative effects on human health

and the environment.

For more information about collection and

recycling, please contact your local

municipality.

Penalties may be applicable for incorrect

disposal of this waste, in accordance with

national legislation.

Note for the battery symbol (bottom

symbol):

This symbol might be used in combination

with a chemical symbol. In this case it

complies with the requirement set by the

Directive for the chemical involved.

About Bluetooth®

Frequency band

• This system uses the 2.4 GHz frequency band.

Certification

• This system conforms to the frequency restrictions and

has received certification based on frequency laws.

Thus, a wireless permit is not necessary.

• The actions below are punishable by law:

– Taking apart or modifying the main unit.

– Removing specification indications.

Restrictions of use

• Wireless transmission and/or usage with all Bluetooth

equipped devices is not guaranteed.

• All devices must conform to standards set by Bluetooth

SIG, Inc.

• Depending on the specifications and settings of a

device, it can fail to connect or some operations can be

different.

• This system supports Bluetooth

® security features. But

depending on the operating environment and/or

settings, this security is possibly not sufficient. Transmit

data wirelessly to this system with caution.

• This system cannot transmit data to a Bluetooth

device.

Range of use

• Use this device at a maximum range of 10 m.

• The range can decrease depending on the environment,

obstacles or interference.

Interference from other devices

• This system may not function properly and troubles

such as noise and sound jumps may arise due to radio

wave interference if this unit is located too close to

other Bluetooth

® devices or the devices that use the

2.4 GHz band.

• This system may not function properly if radio waves

from a nearby broadcasting station, etc. is too strong.

Intended usage

• This system is for normal, general use only.

• Do not use this system near an equipment or in an

environment that is sensitive to radio frequency

interference (example: airports, hospitals, laboratories,

etc.).

Declaration of Conformity (DoC)

Hereby, “

Panasonic Corporation

” declares that this

product is in compliance with the essential requirements

and other relevant provisions of Directive 1999/5/EC.

Customers can download a copy of the original DoC to

our R&TTE products from our DoC Server:

http://www.doc.panasonic.de

Contact to Authorised Representative: Panasonic

Marketing Europe GmbH, Panasonic Testing Centre,

Winsbergring 15, 22525 Hamburg, Germany

This product is intended for general consumer.

(Category 3)

Licenses

Panasonic cannot be held responsible for data and/or

information that can possibly be compromised during a

wireless transmission.

MPEG Layer-3 audio coding technology licensed from

Fraunhofer IIS and Thomson.

The Bluetooth

® word mark and logos are registered

trademarks owned by the Bluetooth SIG, Inc. and any

use of such marks by Panasonic Corporation is under

license. Other trademarks and trade names are those of

their respective owners.

█Main unit displays

“--:--”

• You connected the AC mains lead for the first time or there

was a power failure recently. Set the clock.

“ADJUST CLOCK”

• The clock is not set. Adjust the clock.

“ADJUST TIMER”

• The play timer is not set. Adjust the play timer.

“AUTO OFF”

• The system has not been used for 20 minutes and will

switch off within a minute. To cancel, press any button.

“ERROR”

• An incorrect operation was done. Read the instructions and

try again.

“F61”

“F77”

• Disconnect the AC mains lead and consult your dealer.

“F70”

• Examine the Bluetooth

® device.

• Disconnect the Bluetooth

® device. Switch off the system

and then switch on again.

“F76”

• There is a problem with the power supply.

• Disconnect the AC mains lead and consult your dealer.

“NODEVICE”

• The USB device is not connected. Examine the connection.

“NO DISC”

• You have not put in a disc.

“NO MEMORY”

• DAB memory presetting has not been done.

“NO PLAY”

• Examine the content. You can only play supported format.

• The system may have a problem. Switch off the system and

then switch on again.

“NO SIGNAL”

• The station cannot be received. Adjust the antenna.

“PLAYERROR”

• You played an unsupported MP3 file. The system will skip

that track and play the next one.

“REMOTE 1”

“REMOTE 2”

• The remote control and the main unit are using different

codes. Change the code of the remote control.

– When “REMOTE 1” is shown, press and hold [OK] and [ ]

for a minimum of 4 seconds.

– When “REMOTE 2” is shown, press and hold [OK] and

[USB/CD] for a minimum of 4 seconds.

“SCAN FAILED”

• Stations cannot be received. Adjust the antenna or do

manual tuning.

“USB OVER CURRENT ERROR”

• The USB device is using too much power. Disconnect the

USB device, switch off the system and then switch on again.

“–VBR–”

• The system cannot show the remaining play time for variable

bit rate (VBR) tracks.

Remote control code

When other Panasonic equipment responds to the remote

control of this system, change the remote control code for

this system.

Preparation

Press [USB/CD] to select “CD”.

█To set the code to “REMOTE 2”

1Press and hold [SELECTOR] on the main unit and

[USB/CD] on the remote control.

“REMOTE 2” is shown.

2Press and hold [OK] and [USB/CD] for a minimum of

4 seconds.

█To set the code to “REMOTE 1”

1Press and hold [SELECTOR] on the main unit and [ ]

on the remote control.

“REMOTE 1” is shown.

2Press and hold [OK] and [ ] for a minimum of

4 seconds.

System memory reset

Reset the memory when the following situations occur:

• There is no response when buttons are pressed.

• You want to clear and reset the memory contents.

1Disconnect the AC mains lead.

2While you press and hold [1] on the main unit,

connect the AC mains lead again.

Continue to press and hold the button until

“– – – – – – – –” is shown.

3Release [1].

All the settings are set back to the factory preset.

It is necessary to set the memory items again.

Maintenance

To clean this system, wipe with a soft, dry cloth.

• Never use alcohol, paint thinner or benzine to clean this

system.

• Before using chemically treated cloth, read the

instructions that came with the cloth carefully.

Specifications

█Amplifier section

RMS output power stereo mode

Front Ch (both ch driven)

10 W per channel (6 Ω), 1 kHz, 10% THD

Total RMS stereo mode power 20 W

█Tuner, terminals section

Preset memory FM 30 stations

Frequency modulation (FM)

Frequency range

87.50 MHz to 108.00 MHz (50 kHz step)

Antenna terminals 75 Ω (unbalanced)

█DAB+ section

DAB memories 20 channels

Frequency band (wavelength)

Band 5A to 13F (174.928 MHz to 239.200 MHz)III

Sensitivity *BER 4x10-4

Min requirement –98 dBm

DAB external antenna

Terminal F - Connector (75 Ω)

█Disc section

Disc played (8 cm or 12 cm)

CD, CD-R/RW (CD-DA, MP3 )

MPEG-1 Layer 3, MPEG-2 Layer 3

Pick up

Wavelength 790 nm (CD)

█USB section

USB port

USB standard USB 2.0 full speed

Media file format support MP3 (*.mp3)

USB device file system FAT12, FAT16, FAT32

█Bluetooth® section

Version Bluetooth

® Ver. 2.1 + EDR

Class Class 2

Supported profiles A2DP, AVRCP

Operating frequency 2.4 GHz band FH-SS

Operation distance 10 m line of sight

█Speaker section

Speaker unit(s)

Full range 10 cm cone type x 1 per channel

Impedance 6 Ω

Dimensions (W x H x D) 139 mm x 224 mm x 136 mm

Mass 1.3 kg

█General

Power supply AC 220 V to 240 V, 50 Hz

Power consumption 14 W

Dimensions (W x H x D) 184 mm x 123 mm x 235 mm

Mass 1.1 kg

Operating temperature range 0°C to +40°C

Operating humidity range

35% to 80% RH (no condensation)

Note:

• Specifications are subject to change without notice.

Mass and dimensions are approximate.

• Total harmonic distortion is measured by the digital

spectrum analyser.

Power consumption in standby mode

(With “BLUETOOTH STANDBY” set to “OFF”)

0.2 W (approximate)

Power consumption in standby mode

(With “BLUETOOTH STANDBY” set to “ON”)

0.3 W (approximate)

Caution for AC mains lead

For your safety, please read the following text carefully.

This appliance is supplied with a moulded three pin mains

plug for your safety and convenience.

A 5-ampere fuse is fitted in this plug.

Should the fuse need to be replaced please ensure that

the replacement fuse has a rating of 5-ampere and that it

is approved by ASTA or BSI to BS1362.

Check for the ASTA mark or the BSI mark on the

body of the fuse.

If the plug contains a removable fuse cover you must

ensure that it is refitted when the fuse is replaced.

If you lose the fuse cover the plug must not be used until a

replacement cover is obtained.

A replacement fuse cover can be purchased from your

local dealer.

Before use

Remove the connector cover.

How to replace the fuse

The location of the fuse differ according to the type of AC

mains plug (figures A and B). Confirm the AC mains plug

fitted and follow the instructions below.

Illustrations may differ from actual AC mains plug.

1. Open the fuse cover with a screwdriver.

2. Replace the fuse and close or attach the fuse cover.

Supplied accessories

Check and identify the supplied accessories.

Use numbers indicated in parentheses when asking for

replacement parts. (Product numbers correct as of

February 2015. These may be subject to change.)

1 AC mains lead

(K2CT2YY00097)

1 DAB antenna

(N1EYYY000015)

1 Remote control

(N2QAYB000984)

Sales and Support Information

Customer Communications Centre

• For customers within the UK: 0344 844 3899

• For customers within Ireland: 01 289 8333

• Monday – Friday 9:00am – 5:00pm (Excluding public

holidays).

• For further support on your product, please visit our

website: www.panasonic.co.uk

Direct Sales at Panasonic UK

• Order accessory and consumable items for your

product with ease and confidence by phoning our

Customer Communications Centre Monday – Friday

9:00am – 5:00pm (Excluding public holidays).

• Or go on line through our Internet Accessory ordering

application at www.pas-europe.com.

• Most major credit and debit cards accepted.

• All enquiries transactions and distribution facilities are

provided directly by Panasonic UK.

• It couldn’t be simpler!

• Also available through our Internet is direct shopping for

a wide range of finished products. Take a browse on our

website for further details.

Figure A Figure B

Fuse cover

Fuse (5 ampere)

Troubleshooting

Before requesting service, make the following checks. If

you are in doubt about some of the check points, or if the

solutions indicated do not solve the problem, consult your

dealer for instructions.

█Common problems

The unit does not work.

• The safety device has been activated. Do the following:

1. Press [ ] on the main unit to switch the unit to standby 1

mode. If the unit does not switch to standby mode,

– Press and hold the button for a minimum of

10 seconds. Or,

– Disconnect the AC mains lead and connect it again.

2. Press [ ] again to switch on the unit. If the problem 1

persists, consult your dealer.

No operations can be done with the remote control.

• Examine that the battery is installed correctly.

Sound is distorted or no sound.

• Adjust the volume of the system.

• Switch off the system, determine and correct the cause, and

then switch on again. It can be caused by straining of the

speakers through excessive volume or power, and when

using the system in a hot environment.

A humming sound can be heard during playback.

• An AC mains lead or fluorescent light is near the cables.

Keep other appliances and cords away from the cables of

this system.

█Disc

Display not shown correctly.

Playback does not start.

• You have not put in the disc correctly. Put it in correctly.

• Disc is dirty. Clean the disc.

• Replace the disc if it is scratched, warped, or non-standard.

• There is condensation. Let the system dry for 1 to 2 hours.

█USB

The USB device or the contents in it cannot be read.

• The format of the USB device or the contents in it are not

compatible with the system.

• USB devices with storage capacity of more than 32 GB

cannot work in some conditions.

Slow operation of the USB device.

• Large content size or large memory USB device takes longer

time to read.

The elapsed time shown is different from the actual play

time.

• Transfer the data to another USB device or backup the data

and reformat the USB device.

█Radio/DAB+

Sound is distorted.

• Use an optional outdoor antenna. The antenna should be

installed by a competent technician.

A beat sound is heard.

• Switch off the TV or move it away from the system.

• Move mobile telephones away from the system if the

interference is apparent.

█Bluetooth®

Pairing cannot be done.

• Check the Bluetooth® device condition.

• The device is out of the 10 m communication range. Move

the device nearer to the system.

The device cannot be connected.

• The pairing of the device was unsuccessful. Do pairing

again.

• The pairing of the device has been replaced. Do pairing

again.

• This system might be connected to a different device.

Disconnect the other device and try pairing the device again.

The device is connected but audio cannot be heard

through the system.

• For some built-in Bluetooth® devices, you have to set the

audio output to “SC-PM250”

manually. Read the

operating instructions of the device for details.

Sound from the device is interrupted.

• The device is out of the 10 m communication range. Move

the device nearer to the system.

• Remove any obstacle between the system and the device.

• Other devices that use the 2.4 GHz frequency band (wireless

router, microwaves, cordless phones, etc.) are interfering.

Move the device nearer to the system and distance it from

the other devices.

• Select “MODE 1” for stable communication.

Playback image and sound are not synchronised.

• Restart the playback app of the device.

Making the connections

Connect the AC mains lead only after all the other

connections have been made.

1Connect the DAB antenna.

Be sure to tighten fully the nut.

Tape the antenna to a wall with the least amount of

interference.

Use an outdoor antenna if the reception is poor.

2Connect the speakers.

3Connect the AC mains lead.

Do not use an AC mains lead from other equipment.

Conserving power

The system consumes a small amount of power

(Z“Specifications”) when it is in standby mode.

Disconnect the power supply if you do not use the

system.

Some settings will be lost after you disconnect the

system. You have to set them again.

Placement of speakers

The left and right speakers are the same.

You cannot remove the net of the speakers.

Use only the supplied speakers.

You can cause damage to the system and decrease the

sound quality if you use other speakers.

Note:

• Keep your speakers more than 10 mm from the main unit for

ventilation.

• Put the speakers on a flat safe surface.

• These speakers do not have magnetic shielding. Do not put

them near TVs, PCs or other equipment easily influenced by

magnetism.

• When you play at high levels for a long period, it can cause

damage to the speakers and decrease the life of the

speakers.

• Decrease the volume in these conditions to prevent

damage:

– When the sound is distorted.

– When you adjust the sound quality.

Be careful not to cross

(short-circuit) or reverse

the polarity of the speaker

wires as doing so may

damage the speakers.

(6 ):

Adhesive tape

(not supplied)

(6 ):

Red

Black

(6 ):

READ THE “Caution for AC mains lead” BEFORE

CONNECTION.

CAUTION!

•Use the speakers only with the recommended

system. If not, you can cause damage to the

amplifier and speakers and can cause a fire. Consult

an approved service personnel if damage occurs or

if there is a sudden apparent change in

performance.

•Do the procedures included in these instructions

when you attach the speakers.

To household

mains socket

Overview of controls

Do the procedures with the remote control. You can also use the buttons on the main unit if they are the same.

AStandby/on switch [` 1], [ ]

Press to switch the unit from on to standby mode or

vice versa. In standby mode, the unit is still consuming

a small amount of power.

BSelect the audio source

On the remote control:

Press the corresponding button to select the source.

On the main unit:

CBasic playback control

DView the setup menu

EView the content information

FSelect or confirm the option

GOpen or close the disc tray

HDecrease the brightness of the display panel

To cancel, press the button again.

IAdjust the volume level

JMute the sound

To cancel, press the button again.

“MUTE” is also cancelled when you adjust the volume

or when you switch off the system.

KView the play menu

LSelect the sound effects

MDisplay panel

NRemote control sensor

Distance: Within approximately 7 m

Angle: Approximately 20° up and down, 30° left and

right

OUSB port ( )

PDisc tray

QSelect “BLUETOOTH” as the audio source

To start Bluetooth

® pairing, press and hold the button.

Preparing the remote control

Use alkaline or manganese battery.

Install the battery so that the poles (+ and –) align with

those in the remote control.

(not supplied)

Preparing the media

Disc

1Press [CD x] (main unit: [xOPEN/CLOSE]) to open

the disc tray.

Put in a disc with the label facing up.

Press again to close the disc tray.

2Press [USB/CD] to select “CD”.

USB

1Reduce the volume and connect the USB device to

the USB port.

Hold the main unit when connecting or disconnecting

the USB device.

2Press [USB/CD] to select “USB”.

Note:

Do not use a USB extension cable. The system cannot

recognise USB device connected through a cable.

Bluetooth®

You can connect and play an audio device wirelessly

through Bluetooth

®.

Preparation

• Switch on the Bluetooth

® feature of the device and put

the device near the system.

• Read the operating instructions of the device for details.

█Pairing a device

Preparation

If this system is connected to a Bluetooth

® device,

disconnect it (Z“Disconnecting a device”).

1Press [ ].

If “PAIRING” is shown, continue with step 4.

2Press [PLAY MENU] to select “PAIRING”.

Or press and hold [ –PAIRING] on the main unit until

“PAIRING” is shown. Continue with step 4.

3Press [R T, ] to select “OK? YES” and then press

[OK].

“PAIRING” is shown.

To cancel, select “OK? NO”.

4Select “SC-PM250” from the Bluetooth

® menu of the

device.

If prompted for a passkey, input “0000”.

The device connects with this system automatically

after pairing is complete.

The name of the connected device is shown for a few

seconds.

Note:

You can pair up to 8 devices with this system. If a 9th device is

paired, the device that has not been used for the longest time

will be replaced.

█Connecting a device

Preparation

If this system is connected to a Bluetooth

® device,

disconnect it (Z“Disconnecting a device”).

1Press [ ].

“BLUETOOTH READY” is shown.

2Select “SC-PM250” from the Bluetooth

® menu of the

device.

The name of the connected device is shown for a few

seconds.

3Start playback on the device.

Note:

• A device must be paired to connect.

• This system can only connect to one device at a time.

• When “BLUETOOTH” is selected as the source, this

system will automatically try to connect to the last

connected device.

█Disconnecting a device

1Press [ ].

2Press [PLAY MENU] repeatedly to select

“DISCONNECT?”.

3Press [R T, ] to select “OK? YES” and then press

[OK].

“BLUETOOTH READY” is shown.

To cancel, select “OK? NO”.

Using the main unit

Press and hold [ –PAIRING] until “PAIRING” is shown.

Note:

A device is disconnected when you:

• Select a different source.

• Move the device out of the maximum range.

• Disable the Bluetooth

® transmission of the device.

• Switch off the system or the device.

USB device

(not supplied)

Media playback

The following marks indicate the availability of the feature.

Basic playback

CD USB BLUETOOTH

Note:

Depending on the Bluetooth

® device, some operations may

not work.

Viewing available information

CD USB BLUETOOTH

You can view the available information on the display

panel.

Press [DISPLAY].

Note:

• Maximum characters that can be shown: approximately 32

• This system supports ver. 1.0, 1.1 and 2.3 ID3 tags.

• Text data that the system does not support can show

differently.

• Example: MP3 album and track number display.

Play menu

CD USB

1Press [PLAY MENU] repeatedly to select

“PLAYMODE” or “REPEAT”.

2Press [R T, ] to select the setting and then press

[OK].

Note:

• During random playback, you cannot skip to tracks which

have been played.

• The setting is cancelled when you open the disc tray.

CD :

USB :

BLUETOOTH :

CD-R/RW in CD-DA format or with MP3 files.

USB device with MP3 files.

Bluetooth® device.

Play Press [ / ].4 9

Stop Press [8].

USB

The position is memorised.

“RESUME” is shown.

Press again to stop fully.

Pause Press [4 9/ ].

Press again to continue playback.

Skip Press [2 3/ ] or [5 6/ ] to skip track.

CD USB

Press [ ,R T] to skip MP3 album.

Search Press and hold [ / / ].2 3] or [5 6

Album

number

Track

number

PLAYMODE

OFF

PLAYMODE

Cancel the setting.

1-TRACK

1TR

Play one selected track.

Press [ / / ] to 2 3] or [5 6

select the track.

1-ALBUM

1ALBUM

Play one selected MP3 album.

Press [ ,R T] to select the MP3 album.

RANDOM

RND

Play all tracks randomly.

1-ALBUM

RANDOM

1ALBUM RND

Play all tracks in one selected MP3

album randomly.

Press [ ,R T] to select the MP3 album.

REPEAT

OFF REPEAT Cancel the setting.

ON REPEAT Repeat playback.

Link mode

BLUETOOTH

You can change the link mode to suit the connection type.

Preparation

If this system is connected to a Bluetooth

® device,

disconnect it (Z“Disconnecting a device”).

1Press [PLAY MENU] repeatedly to select

“LINK MODE”.

2Press [R T, ] to select the mode and then press [OK].

Note:

Select “MODE 1” if the sound is interrupted.

Input level

BLUETOOTH

You can change the input level setting if the sound input

level of the Bluetooth

® transmission is too low.

1Press [PLAY MENU] repeatedly to select

“INPUT LEVEL”.

2Press [R T, ] to select the level and then press [OK].

Note:

Select “LEVEL 0” if the sound is distorted.

█Note on disc

• This system can play CD-R/RW with CD-DA or MP3

format content.

• Before playback, finalise the disc on the device it was

recorded on.

• Some CD-R/RW cannot be played because of the

condition of the recording.

█Note on USB device

• This system supports USB 2.0 full speed.

• This system can support USB devices of up to 32 GB.

• Only FAT 12/16/32 file system is supported.

█Note on MP3 file

• Files are defined as tracks and folders are defined as

albums.

• Tracks must have the extension “.mp3” or “.MP3”.

• Tracks will not necessarily be played in the order you

recorded them.

• Some files can fail to work because of the sector size.

MP3 file on disc

• This system can access up to:

– 255 albums (including root folder)

– 999 tracks

– 20 sessions

• Disc must conform to ISO9660 level 1 or 2 (except for

extended formats).

MP3 file on USB device

• This system can access up to:

– 800 albums (including root folder)

– 8000 tracks

– 999 tracks in one album

MODE 1 Emphasis on connectivity.

MODE 2

(default)

Emphasis on sound quality.

(default)

Radio

Preparation

Press [RADIO] to select “FM”.

Manual tuning

1Press [PLAY MENU] repeatedly to select

“TUNEMODE”.

Press [

] to select “MANUAL” and then press [OK].

3Press [ ] or [2 3/5 6/ ] to tune in to the

station.

To tune automatically, press and hold the button until

the frequency starts changing quickly.

“STEREO” is shown when a stereo broadcast is being

received.

Memory presetting

You can preset up to 30 FM stations.

█Automatic presetting

1Press [PLAY MENU] to select “A.PRESET”.

Press [

] to select the setting and then press [OK].

The tuner presets all the stations it can receive into the

channels in ascending order.

To cancel, press [ ].8

█Manual presetting

1Press [PLAY MENU] repeatedly to select

“TUNEMODE”.

Press [

] to select “MANUAL” and then press [OK].

3Press [ ] or [2 3/5 6/ ] to tune in to the

station.

4Press [OK].

5Press [R T, ] to select a preset number and then

press [OK].

Do steps 3 through 5 again to preset more stations.

The new station replaces any station that occupies the

same preset number.

█Selecting a preset station

1Press [PLAY MENU] repeatedly to select

“TUNEMODE”.

Press [

] to select “PRESET” and then press [OK].

3Press [ ] or [2 3/5 6/ ] to select the preset

station.

Improving the sound quality

1Press [PLAY MENU] repeatedly to select

“FM MODE”.

2Press [R T, ] to select “MONO” and then press [OK].

To cancel, select “STEREO”.

“MONO” is also cancelled when you change the

frequency.

To memorise the setting

Continue with step 4 of “Manual presetting”.

Checking the signal status

Press [DISPLAY].

LOWEST Tuning begins from the lowest frequency.

CURRENT Tuning begins from the current frequency.

FM – – – – The FM signal is in monaural.

The system is not tuned in to a station.

FM ST The FM signal is in stereo.

FM MONO “MONO” is selected as the “FM MODE”.

DAB+

Preparation

Press [RADIO] to select “DAB+”.

Note:

If you select “DAB+” for the first time, the system will tune

automatically.

Manual tuning

1Press [PLAY MENU] repeatedly to select

“MANUAL SCAN”.

2Press [R T, ] to select the frequency block and then

press [OK].

If no station is detected, “SCAN FAILED” is shown.

Adjust the antenna and try again.

To tune automatically

1Press [PLAY MENU] to select “AUTOSCAN” and

then press [OK].

“START?” is shown.

2Press [OK] to start tuning.

“DAB AUTO SCAN” is shown.

If no station is detected, “SCAN FAILED” is shown.

Do manual tuning.

Note:

Preset frequencies are erased after you do automatic tuning.

Memory presetting

You can preset up to 20 stations.

1Press [PLAY MENU] repeatedly to select

“TUNEMODE”.

2Press [R T, ] to select “STATION” and then press

[OK].

3Press [ ] or [2 3/5 6/ ] to tune in to the

station.

4Press [OK].

5Press [R T, ] to select a preset number and then

press [OK].

Do steps 3 through 5 again to preset more stations.

The new station replaces any station that occupies the

same preset number.

Note:

You cannot preset a station when the station is not

broadcasting or when you have selected a secondary service.

█Selecting a preset station

1Press [PLAY MENU] repeatedly to select

“TUNEMODE”.

2Press [R T, ] to select “PRESET” and then press

[OK].

3Press [ ] or [2 3/5 6/ ] to select the preset

station.

Secondary service

You can listen to secondary services when “ ” is shown.

1Press [PLAY MENU] repeatedly to select

“DAB SECONDARY”.

2Press [R T, ] to select the secondary service and

then press [OK].

To cancel, select “PRIMARY”.

Note:

The setting is cancelled when you select other stations.

Viewing available information

You can view the following information on the display

panel:

• Information about the DAB broadcast

• Programme type

• Ensemble label

• Frequency

• Time

Press [DISPLAY].

Checking the signal quality

You can check the signal quality when adjusting the

antenna.

1Press [PLAY MENU] repeatedly to select

“SIGNAL QUALITY” and then press [OK].

The frequency block followed by the reception quality

is shown.

To select other frequency blocks, press [R T, ].

2Press [OK] again to exit.

Automatic clock adjustment

You can set the clock to update automatically.

1Press [PLAY MENU] repeatedly to select

“AUTO CLOCK ADJ”.

2Press [R T, ] to select “ON ADJUST” and then press

[OK].

To cancel, select “OFF ADJUST”.

Frequency

block

Frequency Reception quality

0 (poor) to 8 (excellent)

Clock and timers

Setting the clock

This is a 24-hour clock.

1Press [SETUP] repeatedly to select “CLOCK”.

2Press [R T, ] to set the time and then press [OK].

To check the time

Press [SETUP] repeatedly to select “CLOCK” and then

press [OK].

In standby mode, press [DISPLAY].

Note:

Reset the clock regularly to maintain accuracy.

Sleep timer

The sleep timer switches off the system after the set time.

1Press [SETUP] to select “SLEEP”.

2Press [R T, ] to select the setting (in minutes) and

then press [OK].

To cancel, select “OFF”.

Note:

• The remaining time is always shown on the display. The

display changes temporarily when you perform other

operations.

• The sleep timer can be used together with the play timer.

• The sleep timer always comes first. Be sure not to set an

overlap of timers.

Play timer

(Except for Bluetooth

® source)

You can set the timer to come on at a certain time to wake

you up.

Preparation

Set the clock.

1Press [SETUP] repeatedly to select “TIMER ADJ”.

2Press [R T, ] to set the start time and then press

[OK].

3Do step 2 again to set the end time.

4Press [R T, ] to select the source you want to play

and then press [OK].

To start the timer

1Press [SETUP] repeatedly to select “TIMER SET”.

2Press [R T, ] to select “SET” and then press [OK].

“#” is shown.

To cancel, select “OFF”.

The system must be switched off for the timer to

operate.

To check the setting

Press [SETUP] repeatedly to select “TIMER ADJ” and

then press [OK].

In standby mode, press [DISPLAY] two times.

Note:

• The timer starts at a low volume and increases gradually to

the preset level.

• The timer comes on at the set time every day if the timer is

on.

• If you switch off the system and then switch on again while a

timer is in operation, the timer will not stop at the end time.

Sound effects

1Press [SOUND] repeatedly to select the sound

effect.

2Press [R T, ] to select the setting and then press

[OK].

Others

Auto off

This system automatically switches off when you do not

use it for 20 minutes.

1Press [SETUP] repeatedly to select “AUTO OFF”.

2Press [R T, ] to select “ON” and then press [OK].

To cancel, select “OFF”.

Note:

This function does not work when you are in radio source or

when a Bluetooth® device is connected.

Bluetooth® standby

This function automatically switches on the system when

you establish a Bluetooth® connection from a paired

device.

1Press [SETUP] repeatedly to select

“BLUETOOTH STANDBY”.

2Press [R T, ] to select “ON” and then press [OK].

To cancel, select “OFF”.

Checking the software version

1Press [SETUP] repeatedly to select “SW VER.” and

then press [OK].

The software version is shown.

2Press [OK] again to exit.

PRESET EQ “HEAVY” (default), “SOFT”, “CLEAR”,

“VOCAL” or “FLAT”

BASS –4 to +4 (default: 0)

Using the main unit

1. Press [BASS].

2. Press [2 3 5 6/ ] or [ / ].

TREBLE –4 to +4 (default: 0)

Using the main unit

1. Press [TREBLE].

2. Press [2 3 5 6/ ] or [ / ].

D.BASS “ON D.BASS” (default) or “OFF D.BASS”

SURROUND “ON SURROUND” or

“OFF SURROUND” (default)

Product specificaties

Merk:	Panasonic
Categorie:	Stereosets
Model:	SC-PM250EB
Kleur van het product:	Zwart, zilver
Soort:	Home audio-minisysteem
Geïntegreerde klok:	Ja
Bluetooth:	Ja
Aan/uitschakelaar:	Ja
Geïntegreerde timer:	Ja
Automatisch uitschakelen:	Ja
USB-poort:	Ja
Aantal USB 2.0-poorten:	1
Gemiddeld vermogen:	20 W
Stroomverbruik (in standby):	0.2 W
Volumeregeling:	Draaiknop
Ingangsspanning:	220 - 240 V
Impedantie:	75 Ohm
Backlight-kleur:	Blauw
Frequentie:	50 Hz
MP3 afspelen:	Ja
Optische drive type:	CD-R, CD-RW
Aantal voorkeurszenders:	4
Aantal kanalen:	2 kanalen
Optical disc player:	Ja
Cassette deck:	Nee
Luidspreker soort:	2-weg
Versterker:	Ja
Afstandsbediening inbegrepen:	Ja
CD wisselaar:	Ja
Stroomverbruik (typisch):	14 W
Hi-Fi:	Ja
Slaaptimer:	Ja
Type beeldscherm:	LCD
Display met achtergrondverlichting:	Ja