Palmer PAN 02 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Palmer PAN 02 (52 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 3 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/52
PAN02
ACTIVE DI-BOX – 1 CHANNEL
USER´S MANUAL
BEDIENUNGSANLEITUNG
MANUEL D`UTILISATION
MANUAL DE USUARIO
EN ENDE ES
2
SCOPE OF APPLICATION
Unbalanced hi-Z cables are susceptible to hum pickup and interference and must be kept short to maintain low noise
levels, and to prevent high frequency roll-off due to cable capacitance. To avoid these problems DI boxes convert unbal-
anced hi-Z line level signals to balanced lo-Z signals which can then be fed to the microphone inputs of mixing consoles.
Professional studio and stage applications use balanced lo-Z signal transfer almost exclusively.
The Palmer PAN02 is an active DI box .The PAN02 can be powered via 48 V phantom power or a 9 V battery block.
Unscrew the lid of the PAN02 to access the battery compartment.
PAN02
ACTIVE DI-BOX – 1 CHANNEL
EN FRDE ES
3
SAFETY INFORMATION
1. Please read these instructions carefully.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other information from the equipment.
5. Use the equipment only in the intended manner and for the intended purpose.
6. Use only sufficiently stable and compatible stands and/or mounts (for fixed installations). Make certain
that wall mounts are properly installed and secured. Make certain that the equipment is installed
securely and cannot fall down.
7. During installation, observe the applicable safety regulations for your country.
8. Never install and operate the equipment near radiators, heat registers, ovens or other sources of heat.
Make certain that the equipment is always installed so that is cooled sufficiently and cannot overheat.
9. Never place sources of ignition, e.g., burning candles, on the equipment.
10. Ventilation slits must not be blocked.
11. Do not use this equipment in the immediate vicinity of water (does not apply to special outdoor equip-
ment - in this case, observe the special instructions noted below. Do not expose this equipment to
flammable materials, fluids or gases.
12. Make certain that dripping or splashed water cannot enter the equipment. Do not place containers filled
with liquids, such as vases or drinking vessels, on the equipment.
13. Make certain that objects cannot fall into the device.
14. Use this equipment only with the accessories recommended and intended by the manufacturer.
15. Do not open or modify this equipment.
16. After connecting the equipment, check all cables in order to prevent damage or accidents, e.g., due to
tripping hazards.
17. During transport, make certain that the equipment cannot fall down and possibly cause property damage
and personal injuries.
18. If your equipment is no longer functioning properly, if fluids or objects have gotten inside the equipment
or if it has been damaged in another way, switch it off immediately and unplug it from the mains outlet
(if it is a powered device). This equipment may only be repaired by authorized, qualified personnel.
19. Clean the equipment using a dry cloth.
20. Comply with all applicable disposal laws in your country. During disposal of packaging, please separate
plastic and paper/cardboard.
21. Plastic bags must be kept out of reach of children.
FOR EQUIPMENT THAT CONNECTS TO THE POWER MAINS:
22. CAUTION: If the power cord of the device is equipped with an earthing contact, then it must be con-
nected to an outlet with a protective ground. Never deactivate the protective ground of a power cord.


Product specificaties

Merk: Palmer
Categorie: Niet gecategoriseerd
Model: PAN 02

Heb je hulp nodig?

Als je hulp nodig hebt met Palmer PAN 02 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Palmer

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd