PAC RPK4-CH4103 Handleiding

PAC Carkit RPK4-CH4103

Lees hieronder de 📖 handleiding in het Nederlandse voor PAC RPK4-CH4103 (22 pagina's) in de categorie Carkit. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/22
Complete Radio Replacement with
Integrated Climate Control Retention for Select
2014–2020 Jeep Grand Cherokee
RPK4-CH4103
© 2020 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
PAC-audio.com
P ifi A C ti
Page 1
Rev: v.1
Date:041020
Introduction and Features
The RPK4-CH4103 is a complete radio replacement kit with integrated climate control retention for the 2014-2020 Jeep
Grand Cherokee. All modules and cables are included to retain important features of the factory system including:
steering wheel-mounted radio controls, factory reverse camera, and AM/FM reception.
A secondary 5.2” LCD screen is added for additional vehicle features and controls including: vehicle performance
gauges and information, climate controls, vehicle settings, factory amplier control, and forced camera activation.
Simplied installation and setup menus allow direct programming of camera triggers, steering wheel controls, and
other settings of the kit and RP4.2-CH4103 interface. Features provided by the LCD screen will vary based on the
vehicle features. See Important Notes (next section) for additional information.
Four hard buttons added to the radio dash bezel (below the 5.2” LCD screen) allow the user to set presets to control
functions including: specic climate controls, forced camera activation, and LCD screen controls. Options for hard
buttons will vary based on vehicle features and which cameras are installed.
Button inserts and seven button openings on the radio dash bezel allow for retention of functions that would
typically be lost when replacing the factory radio.
Some advanced features require additional accessories (sold separately).
Important Notes
1. Does Not Retain:
Cluster Display Features
Compass
Clock
Phone pop-ups
Navigation pop-ups
Factory Amplier Features
Speed Controlled Volume
Uconnect Features
Uconnect Access Remote Start / Lock / Unlock
SOS / Assist
Vehicle Location Service
WiFi-Hotspot
SiriusXM Guardian Services
2. In vehicles equipped with parking sensors, you must use the included external speaker in order to continue hearing
parking sensor chimes. If the vehicle has a factory amplied system and parking sensors, the speaker is not necessary
unless the factory amplier is no longer being used. In cases where the factory amplier and aftermarket amplier are
being used (for example, using an aftermarket amplier for the front speakers and using the factory amplier for the rear
speakers), the RPK4-CH4103 allows the chime output to the external speaker to be set to the channels that are being
driven o of the aftermarket amplier.
3. If you are adding additional cameras, PAC part number RPA-16P5V (sold separately) must be used to connect
up to 5 total cameras.
4. It is very important that the vehicle’s accessory buttons be programmed and tested right away. If they do not
operate, it is likely because the incorrect CAN wire connections are being used.
In 2018+ vehicles, the CAN connections must be made at the vehicle’s star connector (see page 10 for details). Failure
to do so will cause the vehicle’s accessory buttons to not operate and may cause the vehicle’s battery to drain.
We recommend reading this manual thoroughly to familiarize yourself with the entire process
prior to beginning the installation.
5. In newer (2018+) vehicles, the factory amplier may not work or the audio level will be low until the ignition is
cycled. Make sure the aftermarket radio’s volume level is turned down prior to cycling the ignition to prevent
excess volume after the ignition cycle!
6. All vehicle settings options will be listed in the vehicle settings menu, including vehicle Only in 2014 Grand Cherokee:
settings that are not available for your vehicle. The only settings options that can be changed and saved, are options
that were available through the factory radio.
Vehicle Accessories Buttons:
Complete Radio Replacement with
Integrated Climate Control Retention for Select
2014–2020 Jeep Grand Cherokee
RPK4-CH4103
© 2020 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
PAC-audio.com
P ifi A C ti
Page 2
Rev: v.1
Date:041020
Part One: Disassembly of Factory Dash / Dash Prep.
Tools needed for installation: Phillips head screwdriver, pick
tool or small athead screwdriver, 7mm socket, ratchet, T20
torx screwdriver, plastic panel removal tool (example - PAC
part number TL-PRY2), and an airsaw or hacksaw for sub-dash
modication (only required for 2014–2018 applications).
1. Vehicle Accessories Button Inserts
2. Radio Dash Bezel with 5.2” LCD Display
3. External Chime Speaker
4. RP4.2-CH4103 Interface Harness
5. RP4.2-CH4103 Aftermarket Radio Connection
Harness (A109-RAD-HAR TYPE 1-V1)
6. Radio Mounting Shroud
7. AM / FM Antenna Adapter (BAADIN22)
Installation
Components
Start removing the dash panel by
gripping rmly and pulling straight
out from the bottom corner of
the panel. Once the bottom is
released, work your way around
the outside of the dash panel,
pulling away from the dash until
the dash panel comes free.
Step 1
8. Radio Mounting Brackets
9. Speaker Mounting Accessories
10. Reverse Camera Retention Harness (RPA-16P1V)
11. Single DIN Mounting Pocket
12. Radio Mounting Screws
13. RP4.2-CH4103 Radio Replacement Interface
14. LCD Display Harness
(10P-2-10P-18-HAR V2)
15. Female 3.5mm to Male RCA adapter
(X-3.5JACK3F-2RCAM)
16. Male 3.5mm to Female RCA adapter
(X-3.5JACK4M-3RCAF)
17. CAN-Bus Connection Harness (MQS4PT-36)
18. OEM USB Replacement Hub
1
4
6
14
15
16
10
17
8
5
2
11
3
13
7
18
After step 1, the disassembly and radio
removal process varies slightly depending on
whether the vehicle is between the years of
20142017 or if the vehicle is from 2018 and
up. If the vehicle is 2014 2017, proceed to
Page 3; otherwise, skip ahead to Page 5
Section B.
912
Complete Radio Replacement with
Integrated Climate Control Retention for Select
2014–2020 Jeep Grand Cherokee
RPK4-CH4103
© 2020 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
PAC-audio.com
P ifi A C ti
Page 3
Rev: v.1
Date:041020
Disconnect the 52-pin dock and
lock connector and all of the
antennas from the radio (the
number of antenna connections
will vary based on the vehicle’s
available features).
Part One: Disassembly of Factory Dash / Dash Prep. (Cont.)
Remove the four 7mm screws
securing the radio in place.
Remove the radio from the dash
(dash appearance may vary
according to model year).
Step 3 Step 4
Step 5
Section A: 2014 - 2017 Grand Cherokee (Screen is Part of Radio)
Disconnect the harness that is
plugged into the back of the dash
panel and set the dash panel
aside.
Step 2
Remove the three 7mm screws
securing the AC / Heater Control
Module in place.
AC / Heater Control
Module
Step 6
Keyless Entry Antenna
Located Below
Relocating the AC / Heater
Control Module (Steps 6 10)
Only necessary for installation in
2014–2017 Grand Cherokee and
only if there are problems with
the depth of the aftermarket radio.
(Not necessary if installing a
shallow-mount radio)
To relocate the AC / Heater Control Module, it is necessary to release
the clip that holds the harness of the module in place. To access the
clip, remove the two 7mm screws that hold the Keyless Entry Antenna
in place (if available).
Step 7
Keyless Entry Antenna


Product specificaties

Merk: PAC
Categorie: Carkit
Model: RPK4-CH4103

Heb je hulp nodig?

Als je hulp nodig hebt met PAC RPK4-CH4103 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Carkit PAC

Handleiding Carkit

Nieuwste handleidingen voor Carkit