Metra 99-7802CH Handleiding

Metra Carkit 99-7802CH

Lees hieronder de 📖 handleiding in het Nederlandse voor Metra 99-7802CH (8 pagina's) in de categorie Carkit. Deze handleiding was nuttig voor 2 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
METRA - The World’s best kits ®metraonline.com
REV. 11/20/2017 INST99-7802CH
Installation instructions for part 99-7802CH
®
CAUTION!
All accessories, switches, climate controls panels, and
especially air bag indicator lights must be connected before cycling
the ignition. Also, do not remove the factory radio with the key in the
on position, or while the vehicle is running.
© COPYRIGHT 2017 METRA ELECTRONICS CORPORATION
U.S. PATENT # D723,537
• ISO DIN radio provision with pocket
Painted Charcoal
A) Radio housing • B) Radio brackets • C) Pocket • D) (4) #8 x 3/8” Phillips screws
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-1729
Antenna Adapter: • 40-HD11
Steering wheel control interface:ASWC-1
• Panel removal tool Phillips screwdriver
TOOLS REQUIRED
Dash Disassembly ................................................. 2
Kit Preparation ....................................................... 3
Kit Assembly
ISO DIN radio provision with pocket 3 ......................
Table of Contents
AB C D
99-7802CH
®
1. Unclip and remove the a/c vents
from either side of the factory
radio. (Figure A)
2. Remove (4) Phillips screws
securing the radio. (Figure B)
3. Remove (2) Phillips screws
securing the factory hazard button
to the factory radio trim panel.
(Figure C)
4. Remove the (6) panel clips from
the factory radio trim panel and
save for Kit Assembly.
Continue to Kit Preparation
Dash Disassembly
(Figure A) (Figure B)
(Figure C)
99-7802CH
®
Kit AssemblyKit Preparation
ISO DIN radio provision with pocket
1. Secure the to the pocket radio
brackets with the (4) #8 x 3/8”
Phillips screws supplied.
(Figure A)
2.
Remove the metal DIN sleeve and
trim ring from the aftermarket radio.
3. Slide the radio between the radio
brackets and secure using the
screws supplied with the radio.
(Figure B)
4. Locate the factory wiring harness
and antenna plug in the dash.
Metra recommends using the
proper mating adapters from
Metra and/or AXXESS.
5. Secure the radio into the dash and
reassemble the dash in reverse
order of disassembly.
To the radio housing:
1. Attach the (6) factory panel clips.
(Figure A)
2.
Attach the factory hazard button
using the factory screws. (Figure B)
Continue to Kit Assembly
(Figure A)
(Figure B)
(Figure A)
(Figure B)


Product specificaties

Merk: Metra
Categorie: Carkit
Model: 99-7802CH

Heb je hulp nodig?

Als je hulp nodig hebt met Metra 99-7802CH stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Carkit Metra

Handleiding Carkit

Nieuwste handleidingen voor Carkit