PAC RPA-SPDIF Handleiding

PAC Radio RPA-SPDIF

Lees hieronder de 📖 handleiding in het Nederlandse voor PAC RPA-SPDIF (1 pagina's) in de categorie Radio. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
RPA-SPDIF
Ampliî‚¿er Retention Module
For use with PAC RadioPRO Interfaces
Paciî‚¿c Accessory Corporation
® | Ph. 866-931-8021 | support@pac-audio.com
©2015 Pacic Accessory Corporation
www.pac-audio.com
Rev. 082615
P ifi A C ti
The RPA-SPDIF is an analog to SPDIF converter designed for use with select RadioPRO interfaces. This
module will convert analog audio from an aftermarket radio to the SPDIF signal used by some factory
ampliers.
Introduction & Features
Module Overview
1. Connect the 10-pin harness to the RPA-SPDIF.
2. Connect the speaker inputs of the RPA-SPDIF harness.
a. When using with an RP5.2 module, simply plug the 12-pin connector into the
ampliî‚¿ed audio output of the interface.
b. When using with an RP4.2 module, you will need to cut off the 12-pin connector
and wire the right and left speaker inputs to the front speaker outputs of the
aftermarket radio.
3. Connect the 6-pin plug on the RPA-SPDIF (Fig 1) harness to the 6-pin plug on the
RadioPRO harness (Fig 2).
4. Turn the Gain Adjustment dial on the RPA-SPDIF all the way to the left (counter
clockwise).
5. Turn on the aftermarket radio and set the volume to about 2/3 max volume.
6. Begin turning the Gain Adjustment knob on the RPA-SPDIF to the right (clockwise).
Do this until the red clipping LED begins ashing.
7. Once the red LED has turned on, turn the Gain Adjustment knob on the RPA-SPDIF
slightly to the left (counter clockwise) until the red LED goes off.
8. Turn off the aftermarket radio and secure the RPA-SPDIF to the RadioPRO harness.
Installation of the RPA-SPDIF is now complete.
Installation Steps
Wiring Harness
Power LED
Clipping LED
Gain Adjustment
Fig 1
Fig 2


Product specificaties

Merk: PAC
Categorie: Radio
Model: RPA-SPDIF

Heb je hulp nodig?

Als je hulp nodig hebt met PAC RPA-SPDIF stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Radio PAC

Handleiding Radio

Nieuwste handleidingen voor Radio