Ozito VWD-1220S Handleiding

Ozito Stofzuiger VWD-1220S

Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito VWD-1220S (6 pagina's) in de categorie Stofzuiger. Deze handleiding was nuttig voor 97 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
WET & DRY
VACUUM
1250W 20L
INSTRUCTION MANUAL
SPECIFICATIONS
Mains Voltage: 220–240V ~ 50-60Hz
Input Power: 1250W
Max. Suction Power: 160mbar
Air Flow: 32L/s
Air Watts: 195W
Tank Capacity: 20L
Hose Diameter: 35mm
IP Rating: IP24
Weight: 4.3kg
VWD-1220S
STANDARD EQUIPMENT
3 YEAR REPLACEMENT WARRANTY*
Your product is guaranteed for a period of If 36 months from the original date of purchase.
a product is defective it will be replaced in accordance with the terms of this warranty. Warranty
excludes consumable parts, for example: valve adapters and accessories.
*This product is intended for DIY use only and replacement warranty covers domestic use.
WARNING
The following actions will result in the warranty being void.
If the tool has been operated on a supply voltage other than that specified on the tool.
If the tool shows signs of damage or defects caused by or resulting from abuse, accidents
or alterations.
Failure to perform maintenance as set out within the instruction manual.
If the tool is disassembled or tampered with in any way.
Professional, industrial or high frequency use.
WARRANTY
ozito.com.au
20L Wet & Dry Vacuum
Floor Tool, Crevice Tool & Hose
Adaptor
Hose & 3 x Extension Tubes
Filter Bag, Dust Bag & Foam Filter
4 x Castor Wheels & Handle
0421
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY
YOU MUST RETURN THE PRODUCT TO YOUR NEAREST
BUNNINGS WAREHOUSE WITH YOUR BUNNINGS
REGISTER RECEIPT. PRIOR TO RETURNING YOUR
PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR
CUSTOMER SERVICE HELPLINE:
Australia: 1800 069 486
New Zealand: 0508 069 486
The benefits provided under this warranty are in addition to other rights and remedies which
are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to a
replacement or refund for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this warranty,
however, where you have suffered any additional direct loss as a result of a defective product
you may be able to claim such expenses by contacting our customer service helpline above.
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE
THE MODEL NUMBER AND DATE OF PURCHASE
AVAILABLE. A CUSTOMER SERVICE REPRESENTATIVE
WILL TAKE YOUR CALL AND ANSWER ANY QUESTIONS
YOU MAY HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
Ozito Industries Pty. Ltd. 25 Fox Drive, Dandenong South, Victoria, Australia 3175.
Attaching The Castors
1. Turn the tank upside down
and place on a level surface.
2. Press a castor wheel firmly
into the slot until it clicks
into place.
3. Repeat for the other 3
castors.
Attaching The Motor Unit
1. Align the sides of the motor
unit with the motor securing
clips on the tank.
2. Hook the securing clips over the lip of
the motor unit and then press lower
end of the clips against the sides of
the tank to lock them in place.
Attaching The Handle
1. Align the handle with slot on
the top of the motor unit.
2. Insert and push down firmly
until it clicks into place.
1. On/Off Switch
2. Carry Handle
3. Accessory Storage Slot
4. Blower Port
5. Cord Hook
6. Filter Cage
7. Extension Tube
8. Castor Wheels
9. Accessory Storage Slot
10. Motor Securing Clip
11. Vacuum Port
12. Motor
WET & DRY VACUUM
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
1 2 3 4
10
9 7
5
6
12
11
8
WARNING! ENSURE THE TOOL IS TURNED OFF AND
DISCONNECTED FROM THE POWER SUPPLY BEFORE
PERFORMING ANY OF THE FOLLOWING OPERATIONS.
ONLINE MANUAL
Scan this QR Code with your mobile
device to take you to the online manual.
Wet Vacuuming
Use the foam filter for wet
vacuuming.
1. Slip the foam filter over the
filter cage on the bottom
of the motor unit. Ensure
that no air can be sucked
through the filter cage
without beingltered.
Note: Do not use the filter bag
or dust bag when vacuuming
liquids.
WARNING! WHEN WET VACUUMING, SWITCH OFF THE
EQUIPMENT IF LIQUID OR FOAM IS EMITTED WITH THE
EXHAUST AIR.
WARNING! THE VACUUM IS NOT SUITABLE FOR THE
VACUUMING OF COMBUSTIBLE LIQUIDS.
Dry Vacuuming
Use the filter bag for dry
vacuuming.
1. Slip the filter bag over
the filter cage until it is
completely covered. No air
should be pulled through the
unit without being filtered.
Note: Do not use the foam filter
when vacuuming dry matter.
Fitting A Dust Bag
For vacuuming fine, dry dirt it is recommended that you fit a 20
litre dust bag. This will ensure that the filter bag does not clog up
as quickly and help maintain the vacuuming power.
A dust bag is suitable for dry
vacuuming only. Using the dust bag
makes it easier to dispose of collected
dust.
1. To attach, slip the dust bag over the
vacuum inlet on the inside of the tank.
Attaching The Hose
Connect the hose to the inlet
port on the tank for vacuuming.
Connect the hose to the outlet
port on the back of the motor if
using the unit as a blower.
1. Align the slot on the hose
with the tab on either of the
ports.
2. Push the hose onto the
desired port and turn
clockwise to lock the hose
in place.
2. FILTER SELECTION 3. ATTACHING ACCESSORIES
VACUUM
INLET
BLOWER
OUTLET
WARNING! NEVER USE THE WET & DRY VACUUM
WITHOUT A FILTER. ALWAYS ENSURE THAT THE
FILTERS ARE ATTACHED SECURELY.


Product specificaties

Merk: Ozito
Categorie: Stofzuiger
Model: VWD-1220S

Heb je hulp nodig?

Als je hulp nodig hebt met Ozito VWD-1220S stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Stofzuiger Ozito

Handleiding Stofzuiger

Nieuwste handleidingen voor Stofzuiger