Ozito RHD-9035 Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito RHD-9035 (6 pagina's) in de categorie Hamer. Deze handleiding was nuttig voor 40 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/6
900W
ROTARY
HAMMER
900W
ROTARY
HAMMER
900W ROTAR Y HAMM ER
ROTARY
HAMMER
DRILL KIT
900W 3.5J
INSTRUCTION MANUAL
SPECIFICATIONS
Input: 230–240V ~ 50/60Hz
Power: 900W
Impact Rate: 4,300bpm
Impact Energy: 3.5J
No Load Speed: 880/min
Accessory Fitment: SDS+
Drilling Capacity: Ø40mm (Timber)
Ø26mm (Masonry)
Ø13mm (Steel)
Weight: 3.8kg
RHD-9035
STANDARD EQUIPMENT
3 YEAR REPLACEMENT WARRANTY*
Your product is guaranteed for a period of If 36 months from the original date of purchase.
a product is defective it will be replaced in accordance with the terms of this warranty. Warranty
excludes consumable parts, for example: valve adapters and accessories.
*This product is intended for DIY use only and replacement warranty covers domestic use.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other than that specified on the tool.
• If the tool shows signs of damage or defects caused by or resulting from abuse, accidents
or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
WARRANTY
Ozito Industries Pty. Ltd. 25 Fox Drive, Dandenong South, Victoria, Australia 3175.
ozito.com.au
Rotary Hammer Drill & Side Handle
3 x Drill Bits, Depth Rod, Flat Chisel
& Pointed Chisel
Grease Tub, Dust Cover & Pin
Wrench
Kitbox
1221
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY
YOU MUST RETURN THE PRODUCT TO YOUR NEAREST
BUNNINGS WAREHOUSE WITH YOUR BUNNINGS
REGISTER RECEIPT. PRIOR TO RETURNING YOUR
PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR
CUSTOMER SERVICE HELPLINE:
Australia: 1800 069 486
New Zealand: 0508 069 486
The benefits provided under this warranty are in addition to other rights and remedies which
are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to a
replacement or refund for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this warranty,
however, where you have suffered any additional direct loss as a result of a defective product
you may be able to claim such expenses by contacting our customer service helpline above.
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE
THE MODEL NUMBER AND DATE OF PURCHASE
AVAILABLE. A CUSTOMER SERVICE REPRESENTATIVE
WILL TAKE YOUR CALL AND ANSWER ANY QUESTIONS
YOU MAY HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
900W
ROTARY
HAMMER
ROTARY HAMMER DRILL
KNOW YOUR PRODUCT
1. ACCESSORIES
SETUP & PREPARATION
WARNING! ENSURE THE TOOL IS TURNED OFF AND
DISCONNECTED FROM THE POWER SUPPLY BEFORE
PERFORMING ANY OF THE FOLLOWING OPERATIONS.
ONLINE MANUAL
Scan this QR Code with your mobile
device to take you to the online manual.
Attaching The Side Handle
1. Loosen the side handle by
rotating the lower section
anti clockwise and then slide
over the chuck and onto the
neck of the drill.
2. Rotate into the desired
handle position and then
push backwards so that
the notch below the chuck
inserts into one of the
grooves in the upper handle.
Note: Ensure the handle is
pushed all the way back to
avoid interference with the chuck.
3. Secure in position by rotating the lower
section of the handle clockwise.
Attaching The Depth Rod
The depth rod allows you to drill to a pre-determined depth.
1. Loosen the depth rod
securing nut then insert the
depth rod.
2. Adjust the depth rod so that
the drill bit extends beyond
the end of the depth rod to
the required drilling depth.
3. Tighten the depth rod
securing nut to lock the
depth rod into place.
900W
ROTARY
HAMMER
Required
Drilling Depth
900W
ROTARY
HAMMER
1. Depth Rod
2. Accessory Locking Sleeve
3. Depth Rod Locking Screw
4. Side Mode Dial
5. Grease Cap
6. On/Off Trigger
7. Rear Mode Selector
8. Carbon Brush Cap
9. Side Mode Locking Button
10. Side Handle
11. SDS+ Accessory Holder
1 2 3 5 64
10 8 7911
Using The Dust Cover
The cover catches dust and debris whilst using the drill upright or
overhead.
1. Slide the cover over the end
of the accessory.
2. Add lubrication grease.
3. Insert the drill bit into the
chuck as per usual.
4. Press the dust cover to the
end of the locking sleeve.
Installing SDS+ Accessories
1. Before using a drill bit in the hammer
drill, ensure that the SDS+ accessory is
clean of dust and debris.
2. Dip the SDS+ end of the accessory into
the supplied tub of grease.
WARNING! WEAR GLOVES WHEN HANDLING GREASE.
3. Insert the SDS+ accessory
into the chuck.
Note: The locking sleeve
should not be pulled back
when inserting the accessory.
4. Rotate the accessory until it
is inserted as far as possible
into the locking sleeve.
Note: You should hear a click
when it is correctly inserted.
5. Pull on the SDS+ accessory
to check it is locked in.
Note: It should leave
approximately 10-20mm of
movement. This is normal.
6. To remove the SDS+
accessory, pull back the
locking sleeve and pull the
accessory out.
Product specificaties
| Merk: | Ozito |
| Categorie: | Hamer |
| Model: | RHD-9035 |
Heb je hulp nodig?
Als je hulp nodig hebt met Ozito RHD-9035 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Hamer Ozito
16 Maart 2024
16 Maart 2024
21 Januari 2023
4 December 2022
Handleiding Hamer
- Hamer Bosch
- Hamer AEG
- Hamer DeWalt
- Hamer Bavaria
- Hamer Einhell
- Hamer Ferm
- Hamer Global
- Hamer Goon
- Hamer Gude
- Hamer Hikoki
- Hamer Hitachi
- Hamer Makita
- Hamer Metabo
- Hamer Milwaukee
- Hamer Parkside
- Hamer Powerfix
- Hamer Powerplus
- Hamer Robust
- Hamer Ryobi
- Hamer Scheppach
- Hamer Skil
- Hamer Stanley
- Hamer Taurus
- Hamer Topcraft
- Hamer Trotec
- Hamer Wiha
- Hamer Black And Decker
- Hamer Ronix
- Hamer Cocraft
- Hamer Hilti
- Hamer Power Craft
- Hamer Fieldmann
- Hamer Porter-Cable
- Hamer CMI
- Hamer Craftsman
- Hamer Alpha Tools
- Hamer Full Boar
- Hamer King Craft
- Hamer Toolson
- Hamer Anova
- Hamer Einhell Bavaria
- Hamer McKenzie
- Hamer Prowork
- Hamer Proviel
- Hamer XU1
- Hamer Ergotools Pattfield
- Hamer MyTool
- Hamer Bavaria By Einhell
- Hamer Workzone Titanium
Nieuwste handleidingen voor Hamer
5 December 2024
5 December 2024
18 November 2024
5 September 2024
29 Augustus 2024
15 Juli 2024
15 Juli 2024
15 Juli 2024
11 Juli 2024
11 Juli 2024