Anova DM600 Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor Anova DM600 (14 pagina's) in de categorie Hamer. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/14
Instructions - User Manual
HAMMER BRUSH CUTTER
DM600
Millasur, SL.
Rúa Eduardo Pondal, nº 23 - Pol. Ind. Sigüeiro
15688 Oroso - - A Coruña 981 696 465 www.millasur.com-
2
ANOVAthanks you for choosing one of our products and guarantees theassistance and
cooperation that has always distinguished our brand over time.
This machine is designed to last for many years and to be of great use if used in
accordance with the instructions contained in the user manual. We therefore recommend
that you read this instruction manual carefully and follow all our recommendations.
For more information or questions you can contact us through our web supports such as
www.anova.es or www.millasur.com
INFORMATION ABOUT THIS MANUAL
Please pay attention to the information provided in this manual and on the appliance for
your safety and that of others.
• This manual contains instructions for use and maintenance.
• Take this manual with you when you go to work with the machine.
• The contents are correct at the time of printing.
• The rights to make changes at any time are reserved without affecting our legal
responsibilities.
• This manual is considered an integral part of the product and must remain with it
in case of loan or resale.
• Ask your dealer for a new manual in case of loss or damage.
READ THIS MANUAL CAREFULLY BEFORE USING THE MACHINE
To ensure that your machine provides the best results, please read the
usage and safety regulations carefully before using it.
OTHER WARNINGS:
Incorrect use could cause damage to the machine or other objects.
The adaptation of the machine to new technical requirements could cause differences
between the content of this manual and the purchased product.
Read and follow all instructions in this manual. Failure to follow these instructions could
result in personal injury.
Always keep the instruction manual as important information.
3
Important safety rules
1) Before using the machine, please read the instructions carefully and follow the
instructions in the instruction manual for starting, adjustment and maintenance.
2) Before using the machine, pay attention to the following items:
- Check the crankcase and transmission case for oil leaks; engine oil and the
quality of engine oil in the crankcase and transmission case. Replace clean
new oil in time
- Check whether the lubrication parts are well lubricated.
- When refueling, pay attention to the fuel tank which must be filled with clean
fuel. The fuel must be filled with the engine stopped and well ventilated.
Please note that the fuel must not come into contact with hot surfaces,
electrical components or rotating parts.
- Avoid overflow, check if the fuel overflows or leaks. In case of overflow, dry
the machine as soon as possible. Tighten the cap once filled.
- Do not have fireworks nearby to avoid fires.
- Check if the moving parts are loose, chafed or stuck; if the direction of
rotation is consistent with the marking direction.
- Check whether the exposed rotating parts and moving parts have reliable
safety protection devices and safety signs.
- Check that the clutch and other working parts are free of cracks, distortion
and excessive wear.
- If there is any abnormality, it should be fixed before trial operation. There
should be no obvious rubbing, abnormal sounds and vibrations during the
test run. The speed must meet the requirements and speeding work is not
allowed. When replacing the parts involved in safety, work should be done
under the requirements of the instructions or the direction of a professional
maintenance person.
3) Minors and those who have not been trained to master the rules for the use of this
machine cannot work with it.
4) The machine cannot be used after drinking or with excessive illness/fatigue.
5) The operator must tighten clothing and fists when operating, and in case of long
hair, wear a protective cap.
6) When the machine is working, the parts that affect safety and operation should not
be modified by yourself. It is not allowed to disassemble or shorten the protective
cover of each part, and the operator must concentrate on the operation.
7) You can only start the machine under the confirmed safety condition. After cold
Product specificaties
| Merk: | Anova |
| Categorie: | Hamer |
| Model: | DM600 |
Heb je hulp nodig?
Als je hulp nodig hebt met Anova DM600 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Hamer Anova
5 September 2024
Handleiding Hamer
- Hamer Bosch
- Hamer AEG
- Hamer DeWalt
- Hamer Bavaria
- Hamer Einhell
- Hamer Ferm
- Hamer Global
- Hamer Goon
- Hamer Gude
- Hamer Hikoki
- Hamer Hitachi
- Hamer Makita
- Hamer Metabo
- Hamer Milwaukee
- Hamer Parkside
- Hamer Powerfix
- Hamer Powerplus
- Hamer Robust
- Hamer Ryobi
- Hamer Scheppach
- Hamer Skil
- Hamer Stanley
- Hamer Taurus
- Hamer Topcraft
- Hamer Trotec
- Hamer Wiha
- Hamer Ozito
- Hamer Black And Decker
- Hamer Ronix
- Hamer Cocraft
- Hamer Hilti
- Hamer Power Craft
- Hamer Fieldmann
- Hamer Porter-Cable
- Hamer CMI
- Hamer Craftsman
- Hamer Alpha Tools
- Hamer Full Boar
- Hamer King Craft
- Hamer Toolson
- Hamer Einhell Bavaria
- Hamer McKenzie
- Hamer Prowork
- Hamer Proviel
- Hamer XU1
- Hamer Ergotools Pattfield
- Hamer MyTool
- Hamer Bavaria By Einhell
- Hamer Workzone Titanium
Nieuwste handleidingen voor Hamer
5 December 2024
5 December 2024
18 November 2024
29 Augustus 2024
15 Juli 2024
15 Juli 2024
15 Juli 2024
11 Juli 2024
11 Juli 2024
11 Juli 2024