Ozito RHD-6100 Handleiding

Ozito Boormachine RHD-6100

Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito RHD-6100 (6 pagina's) in de categorie Boormachine. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/6

ROTARY

HAMMER

DRILL KIT

1500W

INSTRUCTION MANUAL

SPECIFICATIONS

Motor: 1500W

Impact Power: 5 Joule

Impact Rate: 3,000 bpm

No Load Speed: 750/min

Accessory Fitment: SDS+

Drilling Capacities: Timber 40mm

Steel 13mm

Masonry 36mm

RHD-6100

WHAT’S IN THE BOX

Kit Box

Rotary Hammer Drill

Side Handle

Accessories

OZITO Australia/New Zealand (Head Ofﬁce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.

ozito.com.au

0816

IN ORDER TO MAKE A CLAIM UNDER THIS

WARRANTY YOU MUST RETURN THE PRODUCT

TO YOUR NEAREST BUNNINGS WAREHOUSE WITH

YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO

RETURNING YOUR PRODUCT FOR WARRANTY

PLEASE TELEPHONE OUR CUSTOMER SERVICE

HELPLINE:

Australia 1800 069 486

New Zealand 0508 069 486

3 YEAR REPLACEMENT WARRANTY

Your product is guaranteed for a period of 36 months from the

original date of purchase and is intended for DIY (Do It Yourself)

use only. If a product is defective it will be replaced in accordance

with the terms of this warranty. Warranty excludes consumable

parts, for example: carbon brushes, included accessories etc.

WARNING

The following actions will result in the warranty being void.

• If the tool has been operated on a supply voltage other

than that speciﬁed on the tool.

• If the tool shows signs of damage or defects caused

by or resulting from abuse, accidents or alterations.

• Failure to perform maintenance as set out within the

instruction manual.

• If the tool is disassembled or tampered with in any way.

• Professional, industrial or high frequency use.

WARRANTY

TO ENSURE A SPEEDY RESPONSE PLEASE

HAVE THE MODEL NUMBER AND DATE OF

PURCHASE AVAILABLE. A CUSTOMER SERVICE

REPRESENTATIVE WILL TAKE YOUR CALL

AND ANSWER ANY QUESTIONS YOU MAY

HAVE RELATING TO THE WARRANTY POLICY

OR PROCEDURE.

The beneﬁts provided under this warranty are in addition

to other rights and remedies which are available to you at law.

Our goods come with guarantees that cannot be excluded

at law. You are entitled to a replacement or refund for a major

failure and for compensation for any other reasonably foreseeable

loss or damage. You are also entitled to have the goods repaired

or replaced if the goods fail to be of acceptable quality and the

failure does not amount to a major failure.

Generally you will be responsible for all costs associated with

a claim under this warranty, however, where you have suffered

any additional direct loss as a result of a defective product you

may be able to claim such expenses by contacting our customer

service helpline above.

ONLINE MANUAL

Scan this QR Code with your

mobile device to take you to

the online manual.

required

drilling

depth

KNOW YOUR PRODUCT

1. USING THE DEPTH ROD

The depth rod allows you to drill to a predetermined depth.

1. Loosen the depth rod

securing nut then insert

depth rod.

4. Drill the hole until

the end of the

depth rod touches

the workpiece.

3. Tighten the depth

rod securing nut to

lock the depth rod

into place.

2. Adjust the depth

rod so the drill bit

extends beyond the

end of the depth

rod to the required

drilling depth.

1 SDS+ Accessory Holder

2 Accessory Locking Sleeve

3 Magnesium Gear Case

4 Side Handle

5 Depth Rod Locking Knob

6 Side Mode Selector

7 Grease Cap

8 Rear Mode Selector

9 On/Off Switch

10 Soft Grip Rear Handle

ROTARY HAMMER DRILL

11 Depth Rod

12 3 x SDS+ 150mm Drill Bits

13 1 x SDS+ Flat Chisel

14 x 250mm

14 1 x SDS+ Point Chisel

14 x 250mm

15 Dust Cover

16 Tub of Grease

17 Pin Spanner

ACCESSORIES

SETUP & PREPARATION

Ensure the tool is disconnected from the power supply before

performing any of the following operations.

2. SDS+ ACCESSORIES 3.

FITTING AND USING THE DUST COVER

1. Prior to insertion into

chuck, ensure the SDS

accessory is clear of

dust and debris.

1. Slide dust cover over

accessory.

3. Insert drill bit in locking

sleeve.

4. Press dust cover to the

end of locking sleeve.

2. Add lubrication grease.

3. Pull locking sleeve back

and hold.

5. Rotate and continue to

insert as far as possible.

7. Checked SDS+ accessory

is locked. Try to pull it out.

Note: It should have approx

10 – 20mm movement. This

is normal.

2. Prior to insertion into

drill add supplied

lubricant to the SDS

accessory.

4. Insert SDS+ Accessory.

6. Release locking sleeve.

8. To remove the SDS+

accessory pull back the

locking sleeve and pull

accessory out.

Accessory

SDS+

The cover catches dust and debris - while using the drill upright or

overhead - to avoid dust entering the air vents.

Product specificaties

Merk:	Ozito
Categorie:	Boormachine
Model:	RHD-6100

Heb je hulp nodig?

Als je hulp nodig hebt met Ozito RHD-6100 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Boormachine Ozito

Ozito BDP-450 Handleiding

26 Juli 2023

Ozito HDR-1050U Handleiding

30 Juni 2023

Ozito HDR-3000U Handleiding

19 Juni 2023

Ozito HDR-1100U Handleiding

14 Juni 2023

Ozito PXBHS-100U Handleiding

14 Juni 2023

Ozito PXHDS-301U Handleiding

14 Juni 2023

Ozito HDR-5000U Handleiding

14 Juni 2023

Ozito DP-350U Handleiding

8 Juni 2023

Ozito PXDDS-201U Handleiding

24 Mei 2023

Ozito LCD-2050U Handleiding

23 Mei 2023

Handleiding Boormachine

Nieuwste handleidingen voor Boormachine

Einhell YPL 652 Handleiding

4 December 2024

Einhell TH-ID 720 E Handleiding

4 December 2024

Einhell YPL 800 Handleiding

4 December 2024

Einhell RT-ID 75/1 Handleiding

4 December 2024

Einhell 4132720 Handleiding

4 December 2024

Einhell BT-RH 920 Handleiding

4 December 2024

Einhell RT-RH 24 Handleiding

4 December 2024

Einhell BT-RH 850 Handleiding

4 December 2024

Einhell BT-RH 900 Handleiding

4 December 2024

Worx WX956L Handleiding

3 December 2024