Ozito PXRHS-300 Handleiding
Ozito
Boorhamers
PXRHS-300
Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito PXRHS-300 (6 pagina's) in de categorie Boorhamers. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/6
SPECIFICATIONS
Input: 18V
Chuck Type: SDS+
No Load Speed: 1,200/min
Impact Power: 1.2J
Impact Rate: 0-5,700bpm
Max. Torque: 10Nm
Weight (Tool Only): 1.35kg
CORDLESS ROTARY
HAMMER DRILL
INSTRUCTION MANUAL
ozito.com.au
PXRHS-300
STANDARD EQUIPMENT
Cordless Rotary
Hammer Drill
Grease Tub
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
OZITO Australia/New Zealand (Head Ofce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benets provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
0120
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other than that specied
on the tool.
• If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty and are excluded from the warranty extension. Warranty excludes
consumable parts.
KNOW YOUR PRODUCT SETUP & PREPARATION
1. BATTERY INSTALLATION
1 SDS+ Accessory Holder
2 Accessory Locking Sleeve
3 Mode Selector
4 Front Handle
5 LED Worklight
6 Variable Speed trigger
7 Forward/Reverse Lever
8 Sure Grip Rear Handle
CORDLESS ROTARY HAMMER DRILL
1 2 3 4 5 6 7 8
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to the
online manual.
This tool is compatible with all battery and chargers from the Ozito
Power X Change Range.
Installing the Battery Pack
1 Slide the battery into the drill base until it clicks into place.
Removing the Battery Pack
1 Hold down the battery release button.
2 Slide the battery out.
2. SDS+ ACCESSORY FITMENT 3. CONTROLS
OPERATION
Accessory
SDS+
1. Prior to inserting into chuck,
ensure the SDS+ accessory is
clear of dust and debris.
4. Rotate until accessory is inserted as
far as possible into locking sleeve.
5. Check SDS+ accessory is locked. Try
to pull it out. Note: It should have
approximately
10 – 20mm movement.
This is normal.
2. Prior to inserting into drill add
lubricant to the SDS+ accessory.
3. Insert SDS+ Accessory into
locking sleeve.
Note: The locking sleeve
should not be pulled back when
inserting accessory.
6. To remove the SDS+ accessory pull
back the locking sleeve and pull
accessory out.
1. Choose an
operation mode:
Hammer Drill
Rotate the mode selector to the hammer and
drill icon. This setting is recommended for use
when drilling holes in concrete and other masonry
products. The hammer action will be in operation
while simultaneously the drill bit rotates.
Drilling
Rotate the mode selector to the drill icon. This
setting is recommended for use when you desire the
accessory to rotate without hammer action. Ideal for
drilling into timber or steel when correct accessories
for such materials are used.
WARNING! PRIOR TO CHANGING MODES,
THE VARIABLE SPEED TRIGGER SHOULD BE
RELEASED AND THE DRILL SHOULD HAVE
COME TO A COMPLETE STOP.
3
Mode selector
WARNING! WEAR GLOVES WHEN HANDLING
GREASE.
Note: This product is not intended for driving
screws.
WARNING! TO REDUCE THE RISK OF INJURY
WE RECOMMEND THE USE OF GLOVES WHEN
HANDLING DRILL BITS.
WARNING! ENSURE THE TOOL IS SWITCHED OFF AND
THE BATTERY IS REMOVED BEFORE PERFORMING ANY
OF THE FOLLOWING TASKS.
Product specificaties
| Merk: | Ozito |
| Categorie: | Boorhamers |
| Model: | PXRHS-300 |
Heb je hulp nodig?
Als je hulp nodig hebt met Ozito PXRHS-300 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Boorhamers Ozito
4 Oktober 2022
Handleiding Boorhamers
- Boorhamers AEG
- Boorhamers DeWalt
- Boorhamers Batavia
- Boorhamers Einhell
- Boorhamers Ferm
- Boorhamers Hikoki
- Boorhamers Hitachi
- Boorhamers Kress
- Boorhamers Makita
- Boorhamers Metabo
- Boorhamers Milwaukee
- Boorhamers Parkside
- Boorhamers Pattfield
- Boorhamers Skil
- Boorhamers Stanley
- Boorhamers Trotec
- Boorhamers Worx
- Boorhamers Black And Decker
- Boorhamers Ronix
- Boorhamers Meec Tools
- Boorhamers Stayer
- Boorhamers Hilti
- Boorhamers Cotech
- Boorhamers Valex
- Boorhamers Joka
- Boorhamers Tryton
Nieuwste handleidingen voor Boorhamers
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022