Ozito PXCGSS-018 Handleiding

Ozito Heggenschaar PXCGSS-018

Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito PXCGSS-018 (16 pagina's) in de categorie Heggenschaar. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/16

CORDLESS GRASS

TRIMMER & SHEAR

INSTRUCTION MANUAL

SPECIFICATIONS

Voltage: 18V

No Load Speed: 1,200/min

Hedge Trimmer: 200mm Blade

Grass Shear: 100mm Blade

Max. Cutting Cap.: 8mm

Weight: 1.0kg

PXCGSS-018

STANDARD EQUIPMENT

Cordless Grass Trimmer /

Shear

Hedge Trimmer Blade

IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST

RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS WAREHOUSE

WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO RETURNING

YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR CUSTOMER

SERVICE HELPLINE:

Australia 1800 069 486

New Zealand 0508 069 486

WARRANTY

TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL

NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER

SERVICE REPRESENTATIVE WILL TAKE YOUR CALL

AND ANSWER ANY QUESTIONS YOU MAY

HAVE RELATING TO THE WARRANTY POLICY

OR PROCEDURE.

OZITO Australia/New Zealand (Head Ofce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.

The benets provided under this warranty are in addition

to other rights and remedies which are available to you at law.

Our goods come with guarantees that cannot be excluded

at law. You are entitled to a replacement or refund for a major failure and for

compensation for any other reasonably foreseeable loss or damage. You are also

entitled to have the goods repaired

or replaced if the goods fail to be of acceptable quality and the failure does not

amount to a major failure.

Generally you will be responsible for all costs associated with

a claim under this warranty, however, where you have suffered

any additional direct loss as a result of a defective product you

may be able to claim such expenses by contacting our customer service helpline

above.

ozito.com.au

0318

Grass Shear Blade

WARNING

The following actions will result in the warranty being

void.

• If the tool has been operated on a supply voltage other

than that specied on the tool.

• If the tool shows signs of damage or defects caused

by or resulting from abuse, accidents or alterations.

• Failure to perform maintenance as set out within the instruction manual.

• If the tool is disassembled or tampered with in any way.

5 YEAR REPLACEMENT WARRANTY

Your Product is guaranteed for a period of 60 months from the original date of

purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it

will be replaced in accordance with the terms of this warranty. Lithium Ion

batteries and chargers are covered by a 36 month

warranty. Warranty excludes consumable parts, for example blades, blade

cover.

Blade Covers

ONLINE MANUAL

Scan this QR Code with your mobile

device to take you to the online manual.

KNOW YOUR PRODUCT

1. CHANGING BLADES

SETUP & PREPARATION

1. Slide the back of the

blade base into the

recess in the housing.

Inserting the Blade Base

Remove the Blade Base

WARNING! ENSURE THE TOOL IS SWITCHED

OFF AND BATTERY DISCONNECTED BEFORE

PERFORMING ANY OF THE FOLLOWING STEPS.

WEAR GLOVES, BLADES ARE SHARP.

ACCESSORIES

1 2 3 4 5 6

7 8

1. Base Release Button

2. Removable Base

3. Safety Switch

4. On/Off Trigger

5. Sure Grip Handle

6. Battery Seating

CORDLESS TRIMMER/SHEAR

7. Hedge Trimmer Blade

8. Grass Shear Blade

9. Blade Covers

WARNING!: DO NOT USE ANY ATTACHMENTS

OR ACCESSORIES NOT RECOMMENDED BY THE

MANUFACTURER OF THIS PRODUCT, AS IT CAN

RESULT IN SERIOUS PERSONAL INJURY.

2. Push the front of the

blade base into the

housing until it clicks

into place.

1. Press and hold the base

release button.

2. Remove the base by

lifting from the front and

then sliding out.

9Note: Ensure the base is supported by hand when the release button is

pressed to prevent it falling unexpectedly.

BATTERY & CHARGER

This tool is compatible with all battery and chargers from Ozito

Power X Change Range.

3. CONTROLS2. INSERTING &

REMOVING THE BATTERY

OPERATION

1. Align the ribs of the battery with

the recess at the back of the

handle.

1. Press and hold the safety switch

and then squeeze the on/off

trigger to start.

1. Press and hold the battery

release tab and then slide out.

2. Slide the battery in so

that it clicks into place.

2. To stop operation,

release the on/off

trigger.

Inserting a Battery

Removing a Battery

Switching On and Off

WARNING! CLEAR THE AREA TO BE CUT BEFORE

EACH USE. REMOVE ALL OBJECTS, SUCH AS CORDS,

LIGHTS, WIRE, OR STRING WHICH CAN BECOME

ENTANGLED IN THE CUTTING BLADE AND CREATE A

RISK OF SERIOUS PERSONAL INJURY.

Product specificaties

Merk:	Ozito
Categorie:	Heggenschaar
Model:	PXCGSS-018

Heb je hulp nodig?

Als je hulp nodig hebt met Ozito PXCGSS-018 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Heggenschaar Ozito

Ozito PXPHTS-1845 Handleiding

8 April 2024

Ozito PXPPK-2520 Handleiding

27 Augustus 2023

Ozito PXPHTK-2545 Handleiding

27 Augustus 2023

Ozito HTER-600U Handleiding

18 Juni 2023

Ozito PXCHTS-018U Handleiding

13 Juni 2023

Ozito PXCPHTS-018U Handleiding

7 Juni 2023

Ozito PXCHTK-218U Handleiding

6 Juni 2023

Ozito OHT-018 Handleiding

30 Mei 2023

Ozito PXCHT-6502U Handleiding

19 Mei 2023

Ozito EPHT-501 Handleiding

13 Mei 2023

Handleiding Heggenschaar

Nieuwste handleidingen voor Heggenschaar

Proviel PVH 600 Handleiding

19 November 2024

Proviel PVHA 24 Handleiding

19 November 2024

Proviel PVH 660 Handleiding

19 November 2024

Proviel PVH 550 Handleiding

19 November 2024

Anova CG2660 Handleiding

17 November 2024

Sovereign SHT 550 Handleiding

16 November 2024

Gardenline GLH 690 Handleiding

16 November 2024

Gardenline GLHT 680 Handleiding

16 November 2024

Gardenline GLH 664 Handleiding

16 November 2024

Gardenline GLHT 551 Handleiding

16 November 2024